p-Index From 2021 - 2026
0.562
P-Index
This Author published in this journals
All Journal Astonjadro
Claim Missing Document
Check
Articles

Found 3 Documents
Search

Stability of Cable-Stayed Bridge with Composite I-Girder Under Dynamic Wind Loads Using Computational Fluid Dynamics (CFD) Danny Sahusilawane; Bambang Supriyadi; Akhmad Aminullah
ASTONJADRO Vol. 15 No. 3 (2026): ASTONJADRO
Publisher : Universitas Ibn Khaldun Bogor

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32832/astonjadro.v15i3.21590

Abstract

Cable-stayed bridges have emerged as a preferred solution for long-span crossings due to their efficient use of materials and visually appealing design. Nevertheless, their slender aerodynamic configuration renders them highly susceptible to dynamic wind effects such as flutter and vortex shedding, which may compromise serviceability and safety. This study formulates the problem by examining the aerodynamic stability of a composite I-girder cable-stayed bridge under varying wind speeds through the application of Computational Fluid Dynamics (CFD). The bridge deck, with a main span of 150 m, was modeled in three-dimensional solid form and subjected to wind speeds of 4, 8, 12, and 25 m/s. Modal analysis indicated that the torsional-to-bending frequency ratio (ft/fb) was 1.61, falling below the minimum requirement of 2.5 set by Indonesian Bridge and Road Guidelines No. 02/P/BM/2022, thereby justifying further aerodynamic assessment. The novelty of this research lies in integrating structural modal analysis with CFD-based simulations under site-specific wind conditions, providing insights rarely explored in regional contexts. Results demonstrated that the stability parameter fell within category A for 4 and 8 m/s, where wind effects were negligible, but shifted to category B at 12, 17.8, and 25 m/s, requiring attention to deck cross-section geometry. Vortex shedding patterns at 17.8 m/s were regular and consistent, indicating potential resonance, while flows became increasingly complex at 25 m/s, generating higher aerodynamic forces and turbulence energy. Maximum lateral displacements reached 425.6 mm and vertical displacements up to 388.6 mm at extreme wind speeds. In conclusion, CFD-based numerical analysis proved essential in identifying critical wind-induced responses, confirming its importance as a design-stage tool to ensure the long-term stability and reliability of cable-stayed bridges.
Modal Analysis of Diagonal Arch Bridge with Simple Supports (Pinned–Roller) and Lead Rubber Bearings (LRB) Nazar Nazar; Akhmad Aminullah; Bambang Suhendro
ASTONJADRO Vol. 15 No. 3 (2026): ASTONJADRO
Publisher : Universitas Ibn Khaldun Bogor

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32832/astonjadro.v15i3.22133

Abstract

Diagonal arch bridges exhibit unique structural behavior due to their asymmetrical hanger arrangements and complex dynamic interactions among the arch, girders, and hangers. While conventional pinned–roller supports are widely used for their simplicity and cost efficiency, their high horizontal stiffness leads to shorter natural periods and greater seismic demands. To enhance seismic performance, this study investigates the use of lead rubber bearings (LRB) as an alternative support system and evaluates their effects on the dynamic characteristics of a diagonal arch bridge. Using the Detail Engineering Design (DED) of the Mungkid Bridge in Indonesia, two finite element models were developed in Midas Civil 2025: one with conventional pinned–roller supports and another with LRB isolators. Modal analysis was conducted to determine natural periods, mode shapes, and mass participation. Results show that incorporating LRBs lengthens the bridge’s fundamental period by up to 182% compared with the simple-support configuration, effectively reducing natural frequencies and seismic acceleration demands. The LRB model also concentrated modal mass in the first few modes, enabling clearer identification of dominant vibration mechanisms. Although the isolators introduce greater flexibility and improve seismic resilience, further nonlinear time-history analysis is recommended to capture hysteretic effects. These findings highlight the potential of LRBs to improve the seismic adaptability of diagonal arch bridges
Integrating BMS Economic Evaluation with Random Forest Algorithm for Bridge Maintenance Intelligent Prioritization Ismail Wahyudi; Akhmad Aminullah; Suprapto Siswosukarto
ASTONJADRO Vol. 15 No. 4 (2026): ASTONJADRO
Publisher : Universitas Ibn Khaldun Bogor

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32832/astonjadro.v15i4.23672

Abstract

Bridges have a long design life, but over time, their function and quality decline due to material degradation and other factors. Therefore, a bridge management system (BMS) is crucial for making appropriate maintenance decisions. This study developed a model to determine bridge maintenance priorities on the Solo-Ngawi Toll Road, which includes 70 bridges by integrating an economic feasibility evaluation (BMS) method with machine learning using the Random Forest algorithm. The bridge condition was conducted in accordance with the 2022 Bridge Inspection Guidelines, while the economic evaluation was based on the 1993 IBMS guidelines, using Net Present Value per square meter (NPV/m²) and Internal Rate of Return (IRR) indicators. The results of the economic evaluation in the form of bridge maintenance priority rankings, were used as the primary target variables for the machine learning model, enabling Random Forest to predict the order of economic priority for maintenance directly. Input variables include 13 bridge element Condition Scores ​​summarized through the Weighted Condition Score (WCS), as well as five economic variables such as remaining service life, floor area, AADT, diversion distance, and maintenance costs. The Random Forest model produces an R² on the test data of 0.8744. Comparison of ranking results between the BMS and Random Forest methods shows good consistency in high-priority bridges and the Random Forest model is able to identify bridges with critical structural conditions that are less accommodated by the conventional BMS method, resulting in more holistic treatment recommendations.