Rosidawani
Department of Civil Engineering, Faculty of Engineering, Universitas Sriwijaya

Published : 1 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 1 Documents
Search

DETERMINATION OF THE STRUCTURAL PARAMETERS OF TRAPEZOIDAL CHANNEL NUMERICALLY Anthony Costa; K.M. Aminuddin; Rosidawani
Jurnal Pensil : Pendidikan Teknik Sipil Vol. 15 No. 3 (2026): Jurnal Pensil : Pendidikan Teknik Sipil
Publisher : LPPM Universitas Negeri Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21009/jpensil.v15i3.67041

Abstract

In this study, the effects of one geometric parameter, the upper width of a reinforced-concrete trapezoidal irrigation channel, on its finite-element response is examined. Three ETABS shell models were analysed to compare the responses of the models using the same bottom width and height, shell material properties, loading types and support assumptions, but different top widths. The comparison is based on the maximum displacement along with the same shell resultants M11, M22, V13, S11 and S22. Maximum displacements were 0.008, 0.026, and 0.026 mm for Types 1, 2, and 3, respectively. For all models, the flexural demand was controlled by the transverse bending resultant M22, which peaked at 6.225, 3.216 and 2.818 kN·m/m for the three models respectively, while the longitudinal bending resultant M11 was smaller with a peak of 0.948, 0.664 and 0.651 kN·m/m respectively. Reinforcement verification was therefore carried out in each direction: M22 (Principal Transverse Reinforcement) and M11 (Longitudinal/Distribution Reinforcement). According to the baseline SNI 2847:2019 check, for the analysed 200 mm lining the minimum reinforcement, and not flexural strength demand, is the key factor determining the steel quantity needed in practice. The results show that a measurable redistribution of shell actions occurs based on geometry. The numerical values are not a benchmark solution as a formal study of mesh convergence is not included.