Claim Missing Document
Check
Articles

Found 1 Documents
Search

Relationship between thermal driving force and moisture removal characteristics during corn drying in an LPG fired single cylinder rotary dryer I.G.B. Susana; R. Sutanto
Dinamika Teknik Mesin Vol 16, No 2 (2026): Dinamika Teknik Mesin: Jurnal Keilmuan dan Terapan Teknik Mesin
Publisher : Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/dtm.v16i2.1350

Abstract

Drying is an essential post-harvest process to reduce the moisture content of shelled corn to a safe storage level while maintaining product quality. This study investigated the thermal and mass transfer characteristics of shelled corn drying in an LPG-fired single-cylinder rotary dryer operating at a constant air velocity of 7.9 m/s. The drying performance was evaluated based on temperature distribution, thermal driving force, moisture removal, drying rate, moisture ratio, and the relationship between thermal driving force and drying rate. Temperature measurements included inlet air, outlet air, ambient air, and material temperatures. The results showed that the inlet air temperature remained relatively stable at 70.5–72.5°C, while the material temperature gradually increased from 61.4 to 66.7°C during drying, indicating stable heat transfer conditions. Moisture removal and drying rate continuously decreased with drying time due to the reduction of free moisture and the increasing resistance to internal moisture migration. Regression analysis demonstrated a positive relationship between thermal driving force and drying rate. The temperature difference between the material and outlet air produced a stronger correlation with drying rate than the temperature difference between inlet air and material. These findings indicate that temperature deference two is a more representative thermal driving force parameter for describing heat and mass transfer during convective drying of shelled corn. The study provides useful information for evaluating and optimizing the thermal performance of rotary drying systems.