The tool holder on a manual lathe plays an important role in maintaining the stability and accuracy of High Speed Steel (HSS) cutting tools, yet standard holders are often imprecise and difficult to adjust. This work designs, produces, and tests a new HSS tool holder using SolidWorks and a CNC milling machine, with a method that covers CAD design, material selection, CNC programming, the machining process, and quality inspection. Data were obtained through direct observation of the design and production process and through basic function testing on a manual lathe, and were analyzed qualitatively to assess dimensional conformity, structural rigidity, and ease of height adjustment. The results show that the three-part holder, fitted with a micro-thread adjustment mechanism and a rigid clamping base, was successfully produced with a final assembly size of 150 mm x 55 mm x 30 mm, a dimensional tolerance of ±0.1 mm, and a total effective machining time of 181 seconds across the three parts. Representative CNC milling parameters included a spindle speed of 1500 rpm, a feed rate of 300 mm/minute, and a depth of cut of 0.5 mm. Quality-control measurement and functional testing on the manual lathe confirmed that the holder could be mounted on the tool post, clamped the HSS tool stably, and allowed height adjustment up to alignment with the tailstock center without functional problems. It is concluded that the integration of CAD-based design and CNC milling manufacturing is effective in producing a precise, functional, and easily adjustable tool holder, contributing practically to the development of manual lathe support components.