Wai Kwan Lau Wai Kwan Lau
Universiti Tunku Abdul Rahman, Malaysia

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Optimizing Cost-Efficient Quality Control: An Economic Statistical Design of Variable Sampling Interval CV Chart with Unknown Shifts Wai Kwan Lau Wai Kwan Lau; Chai Thing Tan Chai Thing Tan; Chong Heng Lim Chong Heng Lim; Wai Mun Har Wai Mun Har
CoMBInES - Conference on Management, Business, Innovation, Education and Social Sciences Vol. 6 No. 1 (2026): The 6th Conference on Management, Business, Innovation, Education and Social Sc
Publisher : Universitas Internasional Batam

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37253/combines.v6i1.12731

Abstract

Defective outputs in manufacturing or service industries lead to wastage and losses. Maintaining process stability and minimizing defects are important aspects of quality control. Statistical Process Control (SPC) provides a scientific solution to monitor process performance and identify special cause variation due to uncommon errors or problems. Through its control chart method, SPC can also identify anomalies in the process and thus, able to point out unconformity. This in turn will provide a relatively higher consistency in good quality output and reduce wastages. The control charts applied through SPC are different from the traditional version commonly being used. These traditional versions independently monitor the process mean and variability. Problem against these traditional versions is that the process mean and variability are independent. Therefore, traditional way may not be able to grab hold of the actual process behaviour when it changes concurrently in a certain dependent relationship. In contrast, the concept of coefficients of variation (CV) which measure the ratio of the standard deviation to the mean is able to capture the relative variability effectively. The relatively higher efficiency of the CV-based control charts over the traditional charts has thus gain increasing popularity and adoption in process monitoring recently. Control charts started concentrating on the Shewhart approach due to its simplicity yet works well in detecting large variations in a process. A major disadvantage is that Shewhart approach is its inefficiency in detecting small and moderate variations. In a competitive business reality and rapid improvement and innovation in digital quality control methods, it is utmost important and regular expectation to provide conforming output. As a result, exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) charts, have been innovated as better advanced control methods. The two charts can enhance detection performance and increase sensitivity to small shifts by recognizing information from past observations. Another innovation in improving the performance process monitoring is the adaptive control methods. One example is variable sampling interval (VSI) control charts, which changes how often samples are taken based on how the process is performing. It takes samples more frequently when the process shows signs of problems and less often when the process is stable. This approach allows detect changes in the process faster while maintain efficiency when the process is stable. As a result, VSI control charts have been shown to outperform traditional fixed sampling interval (FSI) charts in terms of detection efficiency. Despite the advancements in statistical design, many existing control charts models focus mainly on statistical performance measures such as the average run length (ARL) or average time to signal (ATS), without take into the account the costs or economic impact in the monitoring process. In practice, using control chart comes with various costs, including sampling costs, dealing with false alarms, and the costs incurred when detecting and correcting assignable causes. Ignoring these economic factors may lead to designs that are statistically efficient but economically suboptimal. This had led to the development of economic design and economic statistical design approaches. Which aim to integrate statistical performance with cost considerations. The economic statistical design framework provides a comprehensive approach by simultaneously considering both statistical and economic objectives. In this framework, the design parameters of the control chart are optimised to minimise the expected cost per unit time, subject to constraints on statistical performance. This ensures that the control chart achieves a balance between rapid detection of process shifts and cost efficiency. Although this approach has been successful applied to various types of control charts, its application to CV-based VSI control charts remains relatively limited, especially under realistic conditions where key assumptions may not hold. A critical limitation of most existing economic statistical designs is the assumption that the magnitude of the process shift is known in advance. Under this assumption, the average time to signal (ATS) is commonly used as the performance measure to evaluate the effectiveness of the control chart. In practice, the shift size is unknown and difficult to be estimated in most of the practical situations due to insufficient historical information. The occurrence of assignable causes is often random, and the magnitude of the resulting process shift is likely to vary with time and depends on some unknown stochastic model. Furthermore, limited historical data may prevent practitioners from accurately estimating the shift size. As a result, designing a control chart based on an assumed shift magnitude will results to significant performance degradation if the assumption is incorrect. The misspecification of shift size can have serious consequences for both statistical performance and economic efficiency. Control charts likely will fail to spot small yet critical deviations instantly if the expected shift size is larger than the actual change. On the other hand, if the expected shift is smaller than the actual change, the chart may become overly sensitive, causing many false alarms and unnecessary process interruptions. These issues highlight the need for a more robust design that does not rely on precise knowledge of the shift size. To address this limitation, this study suggests a robust and cost-effective design of a variable sampling interval coefficient of variation (VSI CV) control chart when the shift size in the process is unknown. Instead of assuming the magnitude of shift as a fixed parameter, it is treated as a random variable with a certain probability distribution. This allows the design to account for uncertainty in the shift size and better suited for real-world processes. In this study, the performance of the control chart is measured using the expected average time to signal (EATS). To take the shift size into consideration, EATS is computed by averaging ATS across possible magnitude of shift, with each value weighted according to its probability distribution. This change adds comprehensiveness to its measurement efficiency due to its increase ability to detect changes across different shift scenarios. Given the lack of prior information about the shift distribution in many practical applications, a non-informative assumption is adopted by modelling the shift size as uniformly distributed over a specified interval. This assumption is extensively used in the literature because it does not prefer or fix the shift size while providing a reasonable approximation on the shift size. The EATS is then computed using numerical integration methods which allows an efficient evaluation of the control chart performance. A comprehensive cost model is developed to see how economically efficient the proposed control chart is. This model calculates the expected cost per unit time by dividing the expected total cost of a production cycle by the expected length of that cycle. The cost components considered in the model include the in-control (IC) quality cost, the out-of-control (OOC) quality cost, the cost of sampling, the cost of false alarms, and the cost of identifying and eliminating assignable causes. This model also considers the stochastic character of process failures, which are assumed to follow an exponential distribution. The objective of the proposed design is to determine the optimal set of design parameters for the VSI CV control chart. These include the sample size, control limit, warning limit and the short and long sampling intervals. These parameters are obtained by minimising the average cost per unit time, subject to the statistical constraints. Specifically, the IC performance is maintained by imposing a lower bound on the ATS, while the out-of-control statistical performance is controlled by imposing an upper bound on the EATS. An optimisation algorithm is used to search for the best combination of design parameters that minimises the average cost per unit time while satisfies the statistical constraints. A penalty method is used to remove infeasible solutions that violate the statistical constraints, ensuring that only practical and effective designs are considered. The optimisation process is carried out through a systematic search process, which evaluates different combinations of design parameters and identifies the optimal solution. To evaluate the efficiency of the innovated model, various experiments are conducted using various input parameter settings. The study examines how variations in cost, rates of failure, and process conditions impact the resulting cost performance on the optimal design parameters. The results reveal that the proposed VSI CV control chart with unknown shift size achieves a lower expected cost than the traditional control charts which assume a fixed shift size. This enhancement is due to the ability of the EATS-based approach that capture the shift size variation and resulting in a more balanced design. Furthermore, robustness check on the proposed model under different scenarios are performed by conducting sensitivity analysis. The results imply that the optimum design parameters are influenced by cost of sampling, rate of failure as well as false alarm signalling costs. In generally, the findings emphasize the benefits of integrating unknown shifting of sizes when designing the VSI CV chart. By incorporating the EATS performance metric and cost factors, the proposed chart provides a more realistic and effective framework in monitoring processes. The ability to achieve both cost effectiveness and reliable detection performance makes the suggested approach feasible for modern industrial environments characterised by uncertainty. In conclusion, this study fills the gap to the existing literature by introducing a more robust and cost-effective design for VSI CV control chart under unknown shift size. The use of EATS as a performance metric enables the model to account for variability in magnitude of shift, while economic impacts are integrated to ensure cost-effective operation. The results show that the proposed approach outperforms traditional designs that rely on known shift assumptions. This has made it a valuable tool for practical process monitoring applications. Future study might enhance on this work by exploring different shift size distributions, incorporating Bayesian methods, or applying the methodology to multivariate and non-normal processes.
Inclusive Pricing of Rice in Thailand: An Empirical Analysis Swee Yin Audrey Lim Swee Yin Audrey Lim; Wai Mun Har Wai Mun Har; Chai Thing Tan Chai Thing Tan; Chong Heng Lim Chong Heng Lim; Wai Kwan Lau Wai Kwan Lau; Ai Lian Tan Ai Lian Tan
CoMBInES - Conference on Management, Business, Innovation, Education and Social Sciences Vol. 6 No. 1 (2026): The 6th Conference on Management, Business, Innovation, Education and Social Sc
Publisher : Universitas Internasional Batam

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37253/combines.v6i1.12786

Abstract

Rice and rice planting are very important to Thailand’s social, politic and economy. Thailand is a major rice producer and exporter, thus contributed significantly to the country economy. Thailand is the second largest rice exporter in the world after India. Rice is a staple food in Thailand and majority of farmer in the country are rice planters. Therefore, the health of the rice sector directly affects Thailand’s socio-political landscape. The government of Thailand constantly weighing and balancing an inclusive rice price. On one hand, a low rice price is affordable to citizens but harmful to the rice farmers’ income, which in turn puts the sustainability of rice farming at risk. On the other hand, high rice price enhanced the farmers’ income and acts as incentive to boost rice planting to ensure food security but may be burdensome to the lower income group of citizens. Hence, insights into the major factors that can affect rice price are great help to policymakers in balancing an inclusive pricing for rice that is sustainable and fair for everyone. The inclusivity of rice prices in Thailand has come under growing study due to host of factors that have increase rice price volatility that threatened the stability of both domestic and international rice markets. These volatility in rice prices will cause inclusive bias on either one side between the producers (farmers) and the consumers, between the wealthy and poor citizens, threaten the Thailand’s rice industry sustainability as well as impacted global staple food sufficiency. A robust rice industry enhances food security and thus serves SDG2 (Zero Hunger). In addition, a stable and inclusive rice pricing helps to achieve SDG1 (No Poverty), SDG9 (Decent Work and Economic Growth) and SDG10 (Reduce Inequality). It also motivated this research to analyzing three major hidden factors that have driven rice prices volatility in Thailand and thus, threaten rice price inclusiveness. This is crucial to bring stability and sustainability to the rice industry in both short-term and long-term. Three of those factors that have evaded the attention of past research but pose a volatility issue to rice market in Thailand and inclusivity policy dilemma to policymakers are exchange rate, domestic income levels, and inflation The scope of this paper consists of 36 years of annual time series data from 1990 to 2023. Vector error correction model (VECM) is applied to analyze the short-run and long-term dynamics of rice price volatility that affects the sustainability of the whole rice industry. Past literature showed that volatile rice price can pose a significant risk to different stakeholders and disturb the stable inclusive pricing. For instance, Adeniyi et al. (2019) study the impact of price volatility on rice farming in Nigeria, while Putra et al. (2021) explored similar issues in Indonesia. Additionally, Ahmed et al. (2025) investigated the consequences of unstable rice prices on production in Bangladesh. Thailand, as a major rice exporter, faces constant fluctuations in its currency, the Thai baht, which impacts the actual price Thai rice can fetch in global markets. If Marshall-Learner condition applied, economic theory on exchange rate will tell that when the baht appreciates relative to other currencies, Thai rice becomes more expensive for foreign buyers and thus its export become less competitive (Sek & Har, 2014). This reduces the demand for Thai rice in international markets, leading to potential surpluses in domestic supply and downward pressure on domestic prices. Lower than the fair inclusive price will benefit the consumers to the expense of the rice farmers. Putra et al. (2021) make a similar study on Indonesia Inflation is another macroeconomic policy concern that has an ambiguous effect on rice prices. Do rice prices rise and fall in tandem with inflation? Rising inflation can lead to higher production costs, including the cost of seeds, fertilizers, pesticides, laborers, fuel and utilities expenses. These increased costs can erode their profit margins, potentially forcing them to raise prices to cover the additional expenses and thus, bring in concern to the Thai government to maintain an inclusive price that is fair to every stakeholder (Farooqi, 2023; Thaichareon and Staporncharnchai, 2025). The level of domestic income in Thailand plays a major role in shaping domestic consumer demand and hence, the price for rice. While rice is a staple food in Thai households, its demand may be inelastic. Yet lower household income reduces consumer purchasing power, making it difficult for farmers to sell their rice at fair prices, thus exacerbating the impact on rice farmers relative to other stakeholders. Moreover, any increase in the cost of rice cannot be passed through to increase price, thus disproportionately affects poorer households, including the rural farmers (Putra et al., 2021). While decreasing income level or economic recession poses concern to rice farmers in Thailand, an increasing aggregate income may pose different challenges to rice farmers. As aggregate income level increases, can rice prices and the income of rice farmers rise proportionately? Yanti et al. (2021) reported a positive impact of income increase on rice prices in North Sumatra due to demand-driven cost-push inflation but Wulandari, et al. (2020) has an opposite finding on East Java, Indonesia. This paper analyzes the impact of inflation, aggregate income, and exchange rate on the volatility of Thailand's rice price, using 36 years of annual time series data from 1990 to 2023. Data for rice price, exchange rate, inflation, and aggregate income were sourced from the International Monetary Fund (IMF), the Board of Governors of the United States Federal Reserve System, the World Bank and the National Statistical Office (NSO) of Thailand, respectively. The Vector Error Correction Model (VECM) is used for regression analysis due to its suitability and ability to analyze both long run cointegration relationships and short run dynamics (Khin et at., 2025 and Wulandari et al., 2020). This paper used the Augmented Dickey-Fuller (ADF) test and the Phillips-Perron (PP) test to check for unit root and the Johansen Cointegration Rank Tests to unveil existing of cointegrating vectors. The Granger Causality test is also employed specifically to find any causal links between the variables, which is helpful to policymakers to moderate inclusive pricing. Common diagnostic tests are applied, namely test for normality, heteroskedasticity, autocorrelation and multicollinearity. Both ADF and PP test for unit root indicate all variable significant at first difference. Johansen Cointegration Rank Tests found at least two cointegrating vectors, thus pathing way for Vector Error Correction Model (VECM) regression. Finding from VECM regression reveal that rice prices in Thailand are positively affected by aggregate income changes. The finding is good news for policymakers because a positive income effect is less harmful to inclusive policy regarding rice pricing. However, results reveal that rice prices are insignificant to the changes of inflation and exchange rate. These two findings pose concerns about rice farmers' welfare and production sustainability in the event of any adverse inflation or exchange rate change. From the perspective of inclusive growth, these findings justify the government's establishment of an income safety net policy to ensure the sustainability of rice prices and, therefore, rice production in Thailand. In addition, findings reveal that both exchange rate and inflation are affected by their respective past changes. For example, higher inflation in current period significantly causes higher inflation in the next period. Thus, any adverse movement of inflation and exchange rate will be persistent in the future and thus putting welfare of either group(s) of stakeholders at risk while benefiting the other group. If such events happen, government’s aim for welfare inclusiveness will be at risk too. The long run Granger causality findings are similar and thus support the short run results. Granger causality findings further emphasize the reciprocal long-term relationship between rice price and aggregate income level, implying that higher income level can support rice price while higher rice price can generate high income, especially to rice farmers. Thus, it is important that rice prices can be sustained at high level to avoid a negative spiral impact of lower rice prices and lower income. However, in long run, results found that inflation Granger causes rice prices. This reduces pressure of inflation eroding the purchasing power of rice farmers and hence, lessens the pressure on government in defending an inclusive rice price for the benefit of all stakeholders. Regression results are valid and pass all diagnostic checks. Breusch–Pagan test found not significant existence of heteroskedasticity problem, LM test found no autocorrelation, Jarque–Bera test indicates normality is observed and VIF test show no serious multicollinearity In conclusion, rice is an important source of food, income, and cultural identity, and it directly or indirectly affects the country's aim to promote inclusive growth as per the sustainable development goals. Therefore, sustaining an inclusive rice price can promote a healthy rice industry and ensure the welfare of all stakeholders.