Che Ku Abdullah
Universiti Sains Malaysia

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Chemical, Structural and Morphological Characteristics of Sugarcane Bagasse Fibers Under Different Alkaline Treatment Durations Nur Inas Nadira Mohamed Harrith; Zahran Hafiraj; Mageswari Manimaran; Mohd Nurazzi Norizan; Che Ku Abdullah; Anton Kuzmin
Journal of Fibers and Polymer Composites Vol. 5 No. 3 (2026): Journal of Fibers and Polymer Composites
Publisher : Green Engineering Society

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55043/jfpc.v5i3.714

Abstract

This study investigated the influence of alkaline treatment duration on the chemical composition, structural characteristics, and morphology of sugarcane bagasse (SCB) fiber, a widely available lignocellulosic byproduct of the sugar industry. SCB fibers were treated with 1.0 M sodium hydroxide (NaOH) for 30 min, 1 h, 2 h, and 4 h, with untreated fibers serving as the control. Changes in chemical composition were determined through analysis of extractives, Klason lignin, holocellulose, and cellulose contents, while structural and morphological modifications were characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and optical microscopy. Increasing alkali treatment duration progressively reduced hemicellulose content from 19.39% to 15.09% after 2 h and Klason lignin content from 20.29% to 4.39% after 4 h, indicating effective removal of non-cellulosic constituents. In contrast, cellulose content increased slightly from 44.94% in the untreated fiber to 46.72% after 2 h of treatment. FTIR analysis revealed a marked attenuation of lignin- and hemicellulose-associated absorption bands at 1730, 1600, 1510, 1460, 1245, and 834 cm⁻¹, whereas cellulose-related bands at 1425 and 1030 cm⁻¹ remained largely unchanged. XRD results showed that the crystallinity index (CrI), calculated using the Segal method, increased from 37.78% for untreated SCB to a maximum of 49.80% after 2 h of treatment before decreasing to 45.65% after 4 h, suggesting that excessive alkali exposure may partially disrupt the ordered cellulose structure. Optical microscopy further confirmed progressive surface roughening and fiber defibrillation with increasing treatment duration. Although all measurements were conducted as single determinations and should therefore be interpreted as relative comparisons, the combined results indicate that a 2 h alkaline treatment provides the most favorable balance between non-cellulosic component removal and cellulose crystallinity enhancement. These findings highlight the potential of optimally treated SCB fibers for applications in biocomposites, papermaking, and biodegradable products, although further studies on mechanical, thermal, and end-use performance are required.
Effect of Fibre Loading on the Physical, Mechanical and Flammability Properties of Sugarcane Bagasse/Epoxy Composites Jason Chow Zherui; Kelvin Lee Kai Siang; Mohd Nurazzi Norizan; Zahran Hafiraj; Mageswari Manimaran; Che Ku Abdullah; Anton Kuzmin
Journal of Fibers and Polymer Composites Vol. 5 No. 3 (2026): Journal of Fibers and Polymer Composites
Publisher : Green Engineering Society

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55043/jfpc.v5i3.735

Abstract

Sugarcane bagasse is a readily available lignocellulosic waste material with potential for use as a renewable reinforcement in polymer composites. However, excessive fibre loading can adversely affect composite performance. Therefore, this study systematically evaluated the effects of sugarcane bagasse fibre loading (10, 20, 30, 40, and 50 wt.%) on the physical (water absorption behaviour), mechanical (tensile, flexural and impact testing), flammability (horizontal and vertical burning test) and morphological properties (digital microscopy) of epoxy-based composites fabricated using the hand lay-up method. The results demonstrated that water absorption increased with fibre loading due to the hydrophilic nature of sugarcane bagasse. Moreover, mechanical properties generally improved with increasing fibre content up to an optimum level which is 40wt.%, and show low properties at 50wt% loading of fibre. These improvements were attributed to enhanced stress transfer efficiency and effective fibre-matrix interfacial bonding. Furthermore, increases in fibre loading resulted in reduced mechanical performance because of fibre agglomeration and insufficient matrix impregnation. All composites attained the UL-94 HB classification and but did not satisfy the UL-94 vertical rating criteria. 40wt.% shows lowest horizontal burning rate at 20.08 mm/min with. Overall, composites containing 40 wt.% sugarcane bagasse fibre exhibited the most favourable balance properties highlighting their potential as sustainable lightweight non-structural or in fire-safety application.