Viscosity is an important physical property of hydraulic fluids that affects their ability to transmit pressure, provide lubrication, act as an internal insulator, and determine the efficiency and performance of the hydraulic system. This study aims to evaluate the impact of changes in hydraulic fluid viscosity on the load-transfer speed of a two-ton manual bottle jack under conditions where no additional load is applied. This study was conducted using a purely experimental laboratory method, with a quantitative approach based on comparison. The fluids used consisted of Pertamina Turalik with viscosities of ISO VG 32, ISO VG 46, and ISO VG 68. All tests were carried out with a pumping rhythm maintained consistently with a metronome for 11 seconds, and each variation was tested 3 times. The results showed that increasing fluid viscosity increased piston lifting speed. ISO VG 68 fluid provided the highest average lifting speed of 3.86 mm per second, followed by ISO VG 46 fluid with an average speed of 3.68 mm per second, and ISO VG 32 fluid achieved an average speed of 3.62 mm per second. These findings indicate that in manual bottle jack systems that have low flow rates, fluids with higher viscosity can improve internal sealing capabilities, thereby reducing fluid leakage, increasing pump volumetric efficiency, and accelerating the cylinder chamber filling process. Therefore, the use of ISO VG 68 hydraulic fluid provides optimal piston lifting results under no-load test conditions. This optimization also supports SDG 9 targets regarding technological efficiency and infrastructure innovation.