This Author published in this journals
All Journal Jurnal Polimesin
Claim Missing Document
Check
Articles

Found 1 Documents
Search

Effects of electrode weaving patterns and welding positions on the tensile properties, HAZ hardness, and microstructure of SMAW-welded St37 steel Muhammad Nizar Ramadhan; Rahmadin Bonazir
Jurnal Polimesin Vol 24, No 5 (2026): October
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jpl.v24i5.9143

Abstract

Shielded metal arc welding (SMAW) parameters influence the thermal cycle, weld-pool behavior, and resulting mechanical and microstructural properties of welded joints. This study investigated the effects of electrode weaving patterns and welding positions on the tensile properties, heat-affected zone (HAZ) hardness, and microstructure of SMAW-welded St37 steel. St37 steel plates, 8 mm thick, were welded at a current of 90 A using 3.2-mm-diameter LB-52 electrodes classified as AWS A5.1 E7016. Three electrode weaving patterns-straight, zig-zag, and orbital-were applied in the 1G and 3G welding positions. The welded specimens were evaluated through tensile testing, Rockwell B hardness testing in the HAZ, and optical microstructural examination. The highest HAZ hardness of 55.8 HRB was obtained in the 3G position using the orbital electrode pattern, whereas the lowest hardness of 47.3 HRB was recorded in the 1G position using the straight pattern. The highest ultimate tensile strength of 364.4 MPa was achieved in the 1G position with the orbital pattern, while the lowest value of 289 MPa was obtained in the 3G position with the straight pattern. Microstructural observations revealed that the 1G specimens generally exhibited a denser and more homogeneous ferrite–pearlite distribution than the 3G specimens. Overall, the orbital electrode pattern in the 1G position provided the most favorable tensile performance, while the 3G orbital condition produced the highest HAZ hardness.