The development of lightweight and high-strength materials is increasingly important for transportation and aerospace applications. Al6061 is a promising structural alloy; however, its mechanical performance can be limited by microstructural heterogeneity and the distribution of strengthening phases. Although SiC, carbon-based reinforcements, and T6 heat treatment have been individually investigated in Al6061 composites, the combined response of SiC/MWCNT/graphite hybrid reinforcement to T6 treatment, particularly in terms of phase evolution, microstructural distribution, and hardness, remains insufficiently understood. This study investigated Al6061 hybrid composites reinforced with SiC, MWCNTs, and graphite produced by stir casting and subsequently subjected to homogenization, solution treatment, rapid quenching, and artificial aging. Microstructural and phase characterization was performed using optical microscopy, SEM-EDS, and XRD, while hardness was evaluated using the Rockwell B scale. The untreated composite consisted primarily of an α-Al matrix containing Mg2Si and dispersed reinforcing particles, although localized graphite agglomeration was observed. Heat treatment promoted a more homogeneous microstructure and modified the distribution of Mg2Si precipitates. XRD confirmed the presence of FCC α-Al, Mg2Si, and reinforcement-related phases. The heat-treated composite exhibited the highest hardness of 48.28 HRB, compared with 45.22 HRB for the untreated composite and 22.68 HRB for unreinforced Al6061. The hardness improvement is attributed to the combined contributions of hybrid reinforcement and precipitation strengthening. These results demonstrate the role of T6 heat treatment in tailoring the microstructure and hardness of Al6061/SiC/MWCNT/graphite hybrid composites.