Article Per Year (5 Year)
p-Index From 2020 - 2025
0.408
P-Index
This Author published in this journals
All Journal Edu Elektrika Journal
Hilmi, Ikmal
Unknown Affiliation
Education Electrical & Electronics Engineering

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

 1 
Electroplating Chrome Baja ST 37 Dengan Perubah Tegangan Listrik 6v, 10v, Dan 12v Terhadap Kekerasan Dan Ketebalan Hilmi, Ikmal; Sutarno, Sutarno
Edu Elektrika Journal Vol 9 No 1 (2020): Edu Elektrika Journal
Publisher : Electrical Engineering, Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Iron easily corrects corrosion which reduces metal quality needs to be improved. Electroplating is the process of settling metal ions at the electrodes (cathode) by means of electrolysis due to the difference in electric current potential. Factors affecting electroplating results: Current density, Time, Temperature, Concentration of the electrolyzed solution. The voltage used in electroplating can be varied between 6 volts, 10 volts, and 12 volts while the amperes are directly proportional, small or large with the voltage. workpiece surface. ST 37 steel gets electroplating chrome treatment with 6V, 10V, and 12V voltage changes. Then the results of electroplating chrome will find the surface roughness value by using the Vickers test, after that based on the theoretical formula the thickness of the chrome layer is calculated and compared with the actual results of the thickness using the test (SEM). In the 6V electroplating chrome treatment, the deposition weight was 0.004 gram, the hardness value was 771VHN, and the thickness of the chrome layer was 0.17 µm. electroplating chrome at a voltage of 10V has a deposition weight of 0.014 grams, a hardness value of 838.4VHN, and a thickness of the chrome layer of 0.7 μm. 12V voltage has a sludge weight according to calculations of 0.025 grams. has a hardness value of 858.2 VHN and the results of SEM testing the thickness to 1.3 μm under these conditions the highest hardness due to the chrome surface layer in the specimen is getting heavier and the chrome layer thickness is increasing.
Electroplating Chrome Baja ST 37 Dengan Perubah Tegangan Listrik 6v, 10v, Dan 12v Terhadap Kekerasan Dan Ketebalan Hilmi, Ikmal; Sutarno, Sutarno
Edu Elektrika Journal Vol 9 No 1 (2020): Edu Elektrika Journal
Publisher : Electrical Engineering, Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Iron easily corrects corrosion which reduces metal quality needs to be improved. Electroplating is the process of settling metal ions at the electrodes (cathode) by means of electrolysis due to the difference in electric current potential. Factors affecting electroplating results: Current density, Time, Temperature, Concentration of the electrolyzed solution. The voltage used in electroplating can be varied between 6 volts, 10 volts, and 12 volts while the amperes are directly proportional, small or large with the voltage. workpiece surface. ST 37 steel gets electroplating chrome treatment with 6V, 10V, and 12V voltage changes. Then the results of electroplating chrome will find the surface roughness value by using the Vickers test, after that based on the theoretical formula the thickness of the chrome layer is calculated and compared with the actual results of the thickness using the test (SEM). In the 6V electroplating chrome treatment, the deposition weight was 0.004 gram, the hardness value was 771VHN, and the thickness of the chrome layer was 0.17 µm. electroplating chrome at a voltage of 10V has a deposition weight of 0.014 grams, a hardness value of 838.4VHN, and a thickness of the chrome layer of 0.7 μm. 12V voltage has a sludge weight according to calculations of 0.025 grams. has a hardness value of 858.2 VHN and the results of SEM testing the thickness to 1.3 μm under these conditions the highest hardness due to the chrome surface layer in the specimen is getting heavier and the chrome layer thickness is increasing.
Co-Authors Sutarno Sutarno