N. Edward
Universiti Teknikal Malaysia Melaka (UTeM)

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Analysis of switching and matching stubs in reconfigurable power divider with SPDT switch function N. Edward; N. A. Shairi; Z. Zakaria; I. D. Saiful Bahri
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 17, No 1: February 2019
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v17i1.11714

Abstract

In this paper, performance analysis of switching and matching stubs was done to a reconfigurable power divider with Single Pole Double Throw (SPDT) switch function. Two designs (Design A and Design B) with different positions of switches and matching stubs were proposed. Rogers RO4350 (er=3.48, h=0.508 mm) was used in this analysis as a substrate material with copper thickness of 0.035 mm. The performance analysis was carried out based on insertion loss, return loss and isolation parameters. The simulated results showed that Design B had a better performance than Design A and was able to work as a reconfigurable power divider with SPDT switch function.
A coupled-line balun for ultra-wideband single-balanced diode mixer M. Y. Algumaei; N. A. Shairi; Z. Zakaria; A. M. Zobilah; N. Edward
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 17, No 1: February 2019
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v17i1.11607

Abstract

A multi-section coupled-line balun design for an ultra-wideband diode mixer is presented in this paper. The multi-section coupled-line balun was used to interface with the diode mixer in which it can deliver a good impedance matching between the diode mixer and input/output ports. The mixer design operates with a Local Oscillator (LO) power level of 10 dBm, Radio Frequency (RF) power level of -20 dBm and Intermediate Frequency (IF) of 100 MHz with the balun characteristic of 180° phase shift over UWB frequency (3.1 to 10.6 GHz), the mixer design demonstrated a good conversion loss of -8 to -16 dB over the frequency range from 3.1 to 10.6 GHz. Therefore, the proposed multi-section coupled-line balun for application of UWB mixer showed a good isolation between the mixer’s ports.