L. EL Abdellaoui
Hassan 1st University

Published : 4 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 4 Documents
Search

A Novel Design of a Miniature Metamaterial Antenna for RFID Reader Applications A. Ennajih; J. Zbitou; M. Latrach; A. Errkik; L. EL Abdellaoui; A. Tajmouati
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 16, No 1: February 2018
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v16i1.8060

Abstract

In this article, we propose a novel design of a dual band antenna based metamaterial for RFID applications. The proposed antenna consists of a rectangular patch using inverted u-slot in radiating element and two split ring resonators loaded in the ground plane. The antenna is printed on an FR4 substrate having athickness of 1.6 mm, permitivitty of 4.4 and loss tanget of 0.025. this antenna is feed by a micostrip line having caracteristique of 50 Ohms. The designed antenna resonates at the UHF band around 900Mz with an input impedance of 87MHz and also, resonates at the ISM band around 2.45GHz with a large bandwidth about 516MHz. The designed antenna is simulated bys using CST and the results is validated by HFSS. After simulation, a prototype of the proposed antenna is fabricated, and the measured results show a good agreement with the simulated one.
A New Compact and Wide-band Band-stop Filter Using Rectangular SRR B. Nasiri; A. Errkik; J. Zbitou; A. Tajmouati; L. El Abdellaoui; M. Latrach
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 16, No 1: February 2018
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v16i1.7578

Abstract

This paper proposes a novel compact band-stop filter based on Rectangular SRR unit cell. The BSF structure consists of modified microstrip line connected to 50 Ω feed line on both sides and Rectangular-SRR which has been added and located in the center of the proposed design. The R-SRR dimensions are chosen and optimized in order to achieve a resonant frequency in the undesired band. This filter is designed, simulated and optimized using two electromagnetic solvers. The circuit performances have been investigated and found to have an excellent BSF characterized by high power rejection level in the stop-band, low insertion loss in the both pass-bands and compact size. The experimental results illustrate that the proposed BSF achieves a wide fractional bandwidth of 72 % at 2.2GHz.
A new configuration of patch antenna array for rectenna array applications A. Taybi; A. Tajmouati; J. Zbitou; L. El Abdellaoui; M. Latrach; A. Errkik
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 17, No 5: October 2019
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v17i5.11476

Abstract

The performance and advantages of microstrip patch antennas made them a field of interest for wireless power transmission applications, especially for rectenna systems where the choice of the antenna is a crucial step.  In this paper, a 5.8 GHz circularly polarized patch antenna has been designed and fabricated, then mounted by using 4 elements to achieve an antenna array to enhance the captured power to be converted by the rectifier circuit. The antenna array is well matched at 5.8 GHz in terms of reflection coefficient and has a directivity of 11dB and a gain of 6 dB. Results have been confirmed by fabrication.
A new design of high output voltage rectifier for rectenna system at 2.45 GHz Abdellah Taybi; A. Tajmouati; J. Zbitou; A. Errkik; M. Latrach; L. El Abdellaoui
Indonesian Journal of Electrical Engineering and Computer Science Vol 13, No 1: January 2019
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijeecs.v13.i1.pp226-234

Abstract

This paper deals with the design and achievement of a novel microstrip rectifier with high conversion efficiency and output voltage. Firstly, we have designed a rectifier based on HSMS2820 Schottky diodes by using a series topology to convert the electromagnetic energy into DC power. Then, a stepped-impedance low pass filter was implemented to filter the unwanted harmonics generated by the non-linear Schottky diode. Both of the structures have been simulated and fabricated on an FR4 substrate with dielectric permittivity constant 4.4, thickness of 1.6 mm and loss tangent of 0.025. Good performances were confirmed throughout the measurement results and an interesting output voltage was observed.