Article Per Year (5 Year)
p-Index From 2021 - 2026
0.827
P-Index
This Author published in this journals
All Journal TELKOMNIKA (Telecommunication Computing Electronics and Control) Bulletin of Electrical Engineering and Informatics
Prayoga Bakti
Pamulang University
Computer Science & IT Electrical & Electronics Engineering

Published : 3 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 3 Documents
Search

 1 
Proportional integral derivative-based aneroid sphygmomanometer testing method Wuwus Ardiatna; Nurdina Gita Pratiwi; Siddiq Wahyu Hidayat; Prayoga Bakti; Asep Rahmat Hidayat; Ihsan Supono
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 20, No 3: June 2022
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v20i3.23323

Abstract

One of the parameters to be tested on the sphygmomanometer is the deflection of the dial. The testing method based on the standard uses manual air pressure to increase the pressure so that the dial is pointed to the desired pressure. This paper proposed an automatic testing method using a proportional-integral-derivative (PID) controller based on arduino to control the pressure. The result shows that the system is not suitable to use. The process capability index at each given setpoint is less than 1. This low cost proposed testing method still needs to be improved and could become an alternative solution for laboratory testing of the sphygmomanometer.
Proportional integral derivative-based aneroid sphygmomanometer testing method Wuwus Ardiatna; Nurdina Gita Pratiwi; Siddiq Wahyu Hidayat; Prayoga Bakti; Asep Rahmat Hidayat; Ihsan Supono
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 20, No 3: June 2022
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v20i3.23323

Abstract

One of the parameters to be tested on the sphygmomanometer is the deflection of the dial. The testing method based on the standard uses manual air pressure to increase the pressure so that the dial is pointed to the desired pressure. This paper proposed an automatic testing method using a proportional-integral-derivative (PID) controller based on arduino to control the pressure. The result shows that the system is not suitable to use. The process capability index at each given setpoint is less than 1. This low cost proposed testing method still needs to be improved and could become an alternative solution for laboratory testing of the sphygmomanometer.
Design and development of automatic voltage regulator using Ziegler-Nichols PID for electrical irons testing Irawan Sukma; Aji Dwi Suseno; Muhidin Muhidin; Prayoga Bakti; Wuwus Ardiatna; Ihsan Supono; Himma Firdaus; Dwi Mandaris
Bulletin of Electrical Engineering and Informatics Vol 13, No 6: December 2024
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/eei.v13i6.7326

Abstract

This research presents an automated voltage regulation system crucial for a power input test of electric irons based on SNI IEC 60335-2-3 clause 11.4. The system is designed with an Arduino-based proportional-integral-derivative (PID) control mechanism to augment voltage stability and meet the standard requirement. The system comprises a microcontroller for PID control, a dimmer as the actuator, and a voltage sensor for error measurement. It utilizes the Ziegler-Nichols (Z-N) oscillation method to determine the PID control parameters. The simulation results identified a third-order transfer function as the best fit for the system, and the optimal PID parameters for the system are Kp=60, Ki=125, and Kd=500. The system was tested under the electric iron's active and non-active conditions. The proposed PID system demonstrated stable responses, effectively regulating the system voltage with minimal overshoot and settling time, and meeting standard requirements even under varying load conditions. It suggests potential applications beyond electric iron testing, promising efficiency improvements in broader household product testing.
Co-Authors Aji Dwi Suseno Asep Rahmat Hidayat Dwi Mandaris Himma Firdaus Ihsan Supono Ihsan Supono Irawan Sukma Muhidin Muhidin Nurdina Gita Pratiwi Siddiq Wahyu Hidayat Wuwus Ardiatna Wuwus Ardiatna