Garuda - Garba Rujukan Digital

Classification of different types of metal from recyclable household waste for automatic waste separation system Siti Hajar Yusoff; Sazali Mahat; Nur Shahida Midi; Sarah Yasmin Mohamad; Syasya Azra Zaini
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Nowadays, solid waste has become a major problem in Malaysia. However, most people in Malaysia are not aware and take this problem for granted. The rising number of population and massive development in recent years indirectly generated an enormous value of household waste, making the household waste the main generator for solid waste in Malaysia. It stated that only 5 percent of an average 30,000 tons of waste have been recycled in Malaysia. The purpose of the paper is to design a system to separate the metal recyclable household waste automatically and record the data waste collected. There are total of four detectors used to separate the non-metal, steel, copper and aluminum metal waste. The average time used to complete metal separation process by using the proposed prototype is 14.5 seconds. This paper includes a mechanical part, programming part, an electronic design and also the data collected from this proposed system. The system will be programmed using Arduino Mega as a microcontroller to control all the electronic component in the system.

Recyclable waste separation system based on material classification using weight and size of waste Nur Shahida Midi; Muhammad Aizat Rahmad; Siti Hajar Yusoff; Sarah Yasmin Mohamad
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Insufficient landfills problem had increased the needs to decrease the waste and recycling them. However, despite the efforts done by the government and local authorities on promoting recycling culture by introducing new laws and regulations, the awareness and willingness among the community is still low. One of the possible reasons to this is lack of effort to categorize the waste into the designated category which are paper, glass, plastic and metal. In order to address this problem, it is important to design a system that will ease the process of categorizing the waste. This can be achieve by the automation of the said process. In this work, a system consist of an algorithm and hardware to automatically categorize recyclable waste is proposed. The proposed system are utilizing weight sensor and ultrasonic sensors in order to capture the characteristics of the waste item, which are weight and size so that it can be categorized into paper, glass, plastic and metal. Here, a sytem to automatically separate household waste item is presented by combining an algorithm with a set of hardware consist of minimal number of sensors, conveyer belt and servor motors.

Automatic household waste separation system based on resistance value and moisture content Nurul Nazihah Ahamad; Sarah Yasmin Mohamad; Nur Shahida Midi; Siti Hajar Yusoff; Faridah Abd Rahman
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

In the new era of globalization, waste disposal has turned into an immense concern among the nation. Nowadays, almost every part of the world is confronting a huge issue of improper disposal, segregation and recycling solid waste. Due to rapid growth in economy, industrialization and urbanization, there is also a rapid increase of capacity and volume of solid waste. As a result, improper management of solid waste lead to disturbance to the environment and human health. In this paper, a fully automated waste separation system to discriminate residual and recyclable waste is proposed. The system is designed to focus on household waste, since household waste ranks the highest volume of waste among others. It is designed to separate household waste into recyclable and residual waste according to the materials’ state, which is dry and wet, by employing a moisture sensor to the waste separation system.

Recyclable waste separation system based on material classification using weight and size of waste Nur Shahida Midi; Muhammad Aizat Rahmad; Siti Hajar Yusoff; Sarah Yasmin Mohamad
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Insufficient landfills problem had increased the needs to decrease the waste and recycling them. However, despite the efforts done by the government and local authorities on promoting recycling culture by introducing new laws and regulations, the awareness and willingness among the community is still low. One of the possible reasons to this is lack of effort to categorize the waste into the designated category which are paper, glass, plastic and metal. In order to address this problem, it is important to design a system that will ease the process of categorizing the waste. This can be achieve by the automation of the said process. In this work, a system consist of an algorithm and hardware to automatically categorize recyclable waste is proposed. The proposed system are utilizing weight sensor and ultrasonic sensors in order to capture the characteristics of the waste item, which are weight and size so that it can be categorized into paper, glass, plastic and metal. Here, a sytem to automatically separate household waste item is presented by combining an algorithm with a set of hardware consist of minimal number of sensors, conveyer belt and servor motors.

Classification of different types of metal from recyclable household waste for automatic waste separation system Siti Hajar Yusoff; Sazali Mahat; Nur Shahida Midi; Sarah Yasmin Mohamad; Syasya Azra Zaini
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Nowadays, solid waste has become a major problem in Malaysia. However, most people in Malaysia are not aware and take this problem for granted. The rising number of population and massive development in recent years indirectly generated an enormous value of household waste, making the household waste the main generator for solid waste in Malaysia. It stated that only 5 percent of an average 30,000 tons of waste have been recycled in Malaysia. The purpose of the paper is to design a system to separate the metal recyclable household waste automatically and record the data waste collected. There are total of four detectors used to separate the non-metal, steel, copper and aluminum metal waste. The average time used to complete metal separation process by using the proposed prototype is 14.5 seconds. This paper includes a mechanical part, programming part, an electronic design and also the data collected from this proposed system. The system will be programmed using Arduino Mega as a microcontroller to control all the electronic component in the system.

Automatic household waste separation system based on resistance value and moisture content Nurul Nazihah Ahamad; Sarah Yasmin Mohamad; Nur Shahida Midi; Siti Hajar Yusoff; Faridah Abd Rahman
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

In the new era of globalization, waste disposal has turned into an immense concern among the nation. Nowadays, almost every part of the world is confronting a huge issue of improper disposal, segregation and recycling solid waste. Due to rapid growth in economy, industrialization and urbanization, there is also a rapid increase of capacity and volume of solid waste. As a result, improper management of solid waste lead to disturbance to the environment and human health. In this paper, a fully automated waste separation system to discriminate residual and recyclable waste is proposed. The system is designed to focus on household waste, since household waste ranks the highest volume of waste among others. It is designed to separate household waste into recyclable and residual waste according to the materials’ state, which is dry and wet, by employing a moisture sensor to the waste separation system.

Recyclable waste separation system based on material classification using weight and size of waste Nur Shahida Midi; Muhammad Aizat Rahmad; Siti Hajar Yusoff; Sarah Yasmin Mohamad
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Insufficient landfills problem had increased the needs to decrease the waste and recycling them. However, despite the efforts done by the government and local authorities on promoting recycling culture by introducing new laws and regulations, the awareness and willingness among the community is still low. One of the possible reasons to this is lack of effort to categorize the waste into the designated category which are paper, glass, plastic and metal. In order to address this problem, it is important to design a system that will ease the process of categorizing the waste. This can be achieve by the automation of the said process. In this work, a system consist of an algorithm and hardware to automatically categorize recyclable waste is proposed. The proposed system are utilizing weight sensor and ultrasonic sensors in order to capture the characteristics of the waste item, which are weight and size so that it can be categorized into paper, glass, plastic and metal. Here, a sytem to automatically separate household waste item is presented by combining an algorithm with a set of hardware consist of minimal number of sensors, conveyer belt and servor motors.

Classification of different types of metal from recyclable household waste for automatic waste separation system Siti Hajar Yusoff; Sazali Mahat; Nur Shahida Midi; Sarah Yasmin Mohamad; Syasya Azra Zaini
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Nowadays, solid waste has become a major problem in Malaysia. However, most people in Malaysia are not aware and take this problem for granted. The rising number of population and massive development in recent years indirectly generated an enormous value of household waste, making the household waste the main generator for solid waste in Malaysia. It stated that only 5 percent of an average 30,000 tons of waste have been recycled in Malaysia. The purpose of the paper is to design a system to separate the metal recyclable household waste automatically and record the data waste collected. There are total of four detectors used to separate the non-metal, steel, copper and aluminum metal waste. The average time used to complete metal separation process by using the proposed prototype is 14.5 seconds. This paper includes a mechanical part, programming part, an electronic design and also the data collected from this proposed system. The system will be programmed using Arduino Mega as a microcontroller to control all the electronic component in the system.

Automatic household waste separation system based on resistance value and moisture content Nurul Nazihah Ahamad; Sarah Yasmin Mohamad; Nur Shahida Midi; Siti Hajar Yusoff; Faridah Abd Rahman
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

In the new era of globalization, waste disposal has turned into an immense concern among the nation. Nowadays, almost every part of the world is confronting a huge issue of improper disposal, segregation and recycling solid waste. Due to rapid growth in economy, industrialization and urbanization, there is also a rapid increase of capacity and volume of solid waste. As a result, improper management of solid waste lead to disturbance to the environment and human health. In this paper, a fully automated waste separation system to discriminate residual and recyclable waste is proposed. The system is designed to focus on household waste, since household waste ranks the highest volume of waste among others. It is designed to separate household waste into recyclable and residual waste according to the materials’ state, which is dry and wet, by employing a moisture sensor to the waste separation system.

Neural Network Prediction for Efficient Waste Management in Malaysia Siti Hajar Yusoff; Ummi Nur Kamilah Abdullah Din; Hasmah Mansor; Nur Shahida Midi; Syasya Azra Zaini
Indonesian Journal of Electrical Engineering and Computer Science Vol 12, No 2: November 2018
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijeecs.v12.i2.pp738-747

Maintaining current municipal solid waste management (MSWM) for the next ten years would not be efficient anymore as it has brought many environmental issues such as air pollution. This project has proposed Artificial Neural Network (ANN) based prediction algorithm that can forecast Solid Waste Generation (SWG) based on population growth factor. This study uses Malaysian population as sample size and the data for weight is acquired via authorized Malaysia statistics’ websites. All data will be normalized in the pre-processing stage before proceeding to the prediction using Visual Gene Developer. This project evaluated the performance using R2 value. Two hidden layers with ten and five nodes were used respectively. The result portrayed that there will be an increase of 29.03 percent of SWG in year 2031 compared to 2012. The limitation to this study is that the data was not based on real time as it was restricted by the government.

Title

Found 11 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 11 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 11 Documents
Search