Garuda - Garba Rujukan Digital

KUALITAS ASAP CAIR BATANG GELAM (Melaleuca sp.) Alpian, Alpian; Prayitno, Tiberius Agus; Gentur Sutapa, Johanes Pramana; Budiadi, Budiadi
Jurnal Penelitian Hasil Hutan Vol 32, No 2 (2014): Jurnal Penelitian Hasil Hutan
Publisher : Pusat Litbang Keteknikan Kehutanan dan Pengolahan Hasil Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar

Gelam (Melaleuca sp.) adalah spesies rawa pasang surut yang banyak tumbuh di hutan rawa Kalimantan Selatan dan Kalimantan Tengah. Gelam adalah salah satu spesies yang potensial sebagai kayu penghasil asap cair dengan teknologi yang tersedia dan mudah diimplementasikan. Tulisan ini mempelajari kemungkinan pemanfaatan kayu gelam untuk asap cair. Asap cair ini diperoleh dari proses pirolisis kayu pada suhu 500ÃÂ°C selama 3 jam. Asap cair adalah berwarna kuning kemerahan, transparan dan tidak ada bahan terapung. Berat jenis asap cair adalah 1,008-1,058 dengan pH 3,105-3,195 dan kadar keasaman bervariasi dari 5,167-12,903%. Kadar karbonil dan fenol masing-masing adalah 11,250-28,307% dan 2,429-9,231%. Secara umum, kayu gelam menghasilkan asap cair dan kualitasnya memenuhi persyaratan standar Jepang.

Biomass Distribution of Cajuput Stand in Central Kalimantan Swamp Forest Alpian; Tiberius Agus Prayitno; Johanes Pramana Gentur Sutapa; Budiadi
Jurnal Manajemen Hutan Tropika Vol. 19 No. 1 (2013)
Publisher : Institut Pertanian Bogor (IPB University)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1200.677 KB)

In Central Kalimantan, cajuput (Melaleuca cajuputi subsp. cumingiana) mostly can be found in the riptide swamp area. The present research was intended to determine the distribution of biomass based on the part of tree, position to the ground surface, growing stage, and allometric equation models to estimate the prospective of biomass in 2 different locations (A and B). The A and B locations were characterized by type B riptide peat swamp forest (high tide effected with peat thickness of 51-100 cm) and type C riptide peat swamp forest (tide unaffected shallow soil of < 50 cm with peat thickness of 101-200 cm), respectively. The distribution of cajuput biomass based on the part of tree, position to the ground surface, and growing stage in both locations indicated a similar pattern. Stem contained the highest biomass followed successively by that of root, branch, leave, fruit, and flower. Biomass above the ground was also higher than that of below the ground. Furthermore, biomass content of poles was the highest, followed successively by that of sapling, tree, and seedling. Allometric equation models used to estimate biomass of the A location in the state of green, air dry, and oven dry were 0.335D2,35, 0.143D2,42, and 0.128D2,41, respectively. While those in the B location for green, air dry, and oven dry state were 0.279D2,48, 0.127D2,58, and 0.114D2,56, respectively. The potential of biomass in the A and B location were 144,100 and 127,212 ton ha-1, respectively.

Mycelia Growth of Shiitake (Lentinula edodes) on 4-Wood Species from Leguminaceae Family Dahayu Ratnanindha; Johanes Pramana Gentur Sutapa; Denny Irawati
Wood Research Journal Vol 10, No 1 (2019): Wood Research Journal
Publisher : Masyarakat Peneliti Kayu Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51850/wrj.2019.10.1.26-31

Cultivation of Shiitake mushroom (Lentinula edodes) in Indonesia has not been developed yet, due to its low productivity. It happens because of the limited information of the good ways on cultivation Shiitake in Indonesia. One of the factors that affect the growth of mushroom is the media. In Indonesia, the information about the media composition by using various species of wood have not been found yet. Therefore, this research was conducted to determine the effect of using different wood species to the growth of Shiitake. This study used four wood species from the leguminaceae family, those were: Gamal (Glicidia sepium); Johar (Samanea saman); Leucaena (Leucaena leucocephala); and Sengon (Falcataria moluccana). Those were used as the media by adding 12.5% (w/w) of rice bran and 6% (w/w) of CaCO3, and adjusting the moisture content by adding the distillate water to 65, 70, and 75%. Then, the media was put in to the petridisk (ø 90 mm) and inoculated with Shiitake mushroom. During the mycelia growth, the length of mycelia was measured every 2 days until fifty days, and then glucosamine content was analyzed. In addition, chemical analysis was also conducted to each media. The results showed that different wood species resulted different chemical content of media, except the acid soluble lignin content. The growth rate of mycelia was affected by the moisture content of media, meanwhile the glucosamin content is influenced by the moisture content and various species of wood. The best combination to cultivate the Shiitake mushroom was by using media made of gamal with 70% moisture content. There were positive correlation among the ethanol-toluen extracts content and the mycelia growth, however there was negative correlation among the hemicelullose content the mycelia growth.

Mycelia Growth of Shiitake (Lentinula edodes) on 4-Wood Species from Leguminaceae Family Dahayu Ratnanindha; Johanes Pramana Gentur Sutapa; Denny Irawati
Wood Research Journal Vol 10, No 1 (2019): Wood Research Journal
Publisher : Masyarakat Peneliti Kayu Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51850/wrj.2019.10.1.26-31

Cultivation of Shiitake mushroom (Lentinula edodes) in Indonesia has not been developed yet, due to its low productivity. It happens because of the limited information of the good ways on cultivation Shiitake in Indonesia. One of the factors that affect the growth of mushroom is the media. In Indonesia, the information about the media composition by using various species of wood have not been found yet. Therefore, this research was conducted to determine the effect of using different wood species to the growth of Shiitake. This study used four wood species from the leguminaceae family, those were: Gamal (Glicidia sepium); Johar (Samanea saman); Leucaena (Leucaena leucocephala); and Sengon (Falcataria moluccana). Those were used as the media by adding 12.5% (w/w) of rice bran and 6% (w/w) of CaCO3, and adjusting the moisture content by adding the distillate water to 65, 70, and 75%. Then, the media was put in to the petridisk (ø 90 mm) and inoculated with Shiitake mushroom. During the mycelia growth, the length of mycelia was measured every 2 days until fifty days, and then glucosamine content was analyzed. In addition, chemical analysis was also conducted to each media. The results showed that different wood species resulted different chemical content of media, except the acid soluble lignin content. The growth rate of mycelia was affected by the moisture content of media, meanwhile the glucosamin content is influenced by the moisture content and various species of wood. The best combination to cultivate the Shiitake mushroom was by using media made of gamal with 70% moisture content. There were positive correlation among the ethanol-toluen extracts content and the mycelia growth, however there was negative correlation among the hemicelullose content the mycelia growth.

Usaha Pemanfaatan Limbah Budidaya Jamur Sebagai Bahan Baku Pembuatan Briket Untuk Energi di Kelompok Tani Jamur Sedyo Lestari Denny Irawati; Naresvara Nircela Pradipta; Johanes Pramana Gentur Sutapa
Jurnal Pengabdian kepada Masyarakat (Indonesian Journal of Community Engagement) Vol 2, No 2 (2017): Maret
Publisher : Direktorat Pengabdian kepada Masyarakat Universitas Gadjah Mada

Mushroom farmer society Sedyo Lestari is located in the Argosari, Sedayu, Bantul. The high demand for mushrooms media (baglog) is a good business opportunities for this farmer society. But the process of baglog making requires a lot of energy in the form of firewood, especially for sterilization process of the baglog. On the other hand, the mushroom cultivation process itself remains the waste that can be used as fuel for the sterilization process. So far Sedyo Lestari farmer society members do not have the technology to used the mushroom cultivation waste as a fuel. Therefore, it is imperative to transfer knowledge of biomass briquetting technique. The method used in this activities are socialization, training, and mentoring by starting with the introduction of briquettes and briquetting technology. Subsequently made briquette-making machines followed by training briquette making. Mentoring and socialization were also made to all members of farmer society. Outcome of these activities was briquette-making machines that can be used by all members of the society as well as knowledge about the process of making briquettes. The benefit of using briquettes of mushroom cultivation media waste as fuel for subtitute the firewood can provide savings to the expenditures of farmers for buying firewood and solving the waste management problems for farmers.

PENGARUH UMUR POHON, BONITA DAN POSISI AKSIAL BATANG TERHADAP STRUKTUR MAKROSKOPIS DAN KUALITAS KAYU JATI SEBAGAI BAHAN FURNITUR (Effect of Tree Age, Site Quality Index and Trunk Axial Position on Macroscopic Structure and Quality of Teak Wood) Yustinus Suranto; Tibertius Agus Prayitno; Djoko Marsono; Johanes Pramana Gentur Sutapa
Jurnal Manusia dan Lingkungan Vol 22, No 1 (2015): Maret
Publisher : Pusat Studi Lingkungan Hidup Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/jml.18728

ABSTRAKPenggunaan kayu jati muda merupakan solusi alternatif terhadap terbatasnya ketersediaan bahan baku yang dihadapi oleh industri mebel. Kayu muda cenderung memiliki kayu berkualitas rendah. Salah satu pengukur kualitas kayu adalah sifat struktur makroskopik. Penelitian bertujuan untuk mengetahui pengaruh umur pohon, bonita dan posisi aksial batang terhadap struktur makroskopis kayu dan kualitas kayu. Tiga puluh enam pohon jati muda ditebang dari kawasan hutan KPH Kendal, Provinsi Jawa Tengah. Tiga cakram berketebalan 3 cm diambil dari masing-masing posisi aksial batang, yaitu bagian pangkal, tengah dan ujung. Pengukuran proporsi kayu teras dan dimensi lingkaran tahun dilakukan berdasarkan perbedaan warna alami dan dengan menggunakan lembaran plastik transparan bergambar pola milimeter. Data dianalisis dengan analisis varians dalam rancangan acak lengkap berblok yang disusun secara faktorial. Pengujian lanjutan dilakukan dengan uji HSD Duncan. Kualitas kayu ditentukan dengan analisis determinan berdasarkan kurva normal Z. Hasil penelitian menunjukkan bahwa interaksi tiga faktor tidak berpengaruh terhadap proporsi kayu teras, dan dimensi lingkaran tahun. Interaksi kelas umur dan bonita pengaruh nyata terhadap proporsi kayu teras dan dimensi lingkarah tahun. Posisi aksial batang berpengaruh secara nyata terhadap proporsi kayu teras dan berpengaruh sangat nyata terhadap dimensi lingkaran tahun. Semakin mendekat pada posisi pangkal batang, semakin tinggi proporsi kayu teras dan dimensi lingkaran tahun. Interaksi tiga faktor yaitu kelas umur V, bonita 4 dan posisi tengah batang menghasilkan kualitas kayu tertinggi, yaitu kelas 2, dan interaksi kelas umur V, bonita 3 dan bagian ujung batang menghasilkan kualitas terendah, yaitu kelas 4. Penggunaan kayu berbasis kualitas akan memaksimalkan nilai guna dan meningkatkan umur pakai produk, sehingga mengurangi intensitas penebangan hutan dan lebih ramah lingkungan hidup.ABSTRACTYoung teak utilization is an alternative solution of limited raw materials faced by furniture industry. Young wood tends to have a low-quality wood. One element for measuring wood quality is wood macroscopic structure properties. This study was aimed to determine the effect of tree age, site quality index and axial stem position on wood structures and wood quality. Thirty-six young teak trees were harvested on forest areas of Kendal Forest District, Central Java Province. Three disks were taken from each trunk, namely from the butt, middle and upper parts. Heartwood proportion and annual ring dimensions were measured based on natural color difference by using millimeter grid apparatus. Data were analyzed by using variance analysis arranged in blocked factorial and further testing were performed by using HSD Duncan. Wood quality was analyzed using determinant method which elaborated based on Z norm curve. Results showed that interaction of three factors did not affect on heart-wood proportion and growth ring dimensions. Interaction of age classes and site quality index influence significantly on heart-wood proportion and growth ring dimensions. Stem axial position significantly affects on heart-wood proportion and very significantly effect on growth ring dimensions. The lower wood position, the higher heart-wood proportion and the wider growth ring dimensions. Interaction of three factors namely class age V, site quality index 4 and middle trunk position has a highest wood quality, namely class 2, but interaction of age class V, site quality index 3 and top trunk has the lowest one, namely class 4. The use of wood-based quality will maximize the value and increase the product lifespan, thereby reducing the intensity of logging and become more environmental friendly.

Karakteristik Energi Limbah Tebangan Jati Klonal dari Paliyan-Gunungkidul Denny Irawati; Aditya Nur Cahyo; Yusi Dian; Joko Sulistyo; Sigit Sunarta; Rini Pujiarti; Ganis Lukmandaru; Johanes Pramana Gentur Sutapa
Jurnal Ilmu Kehutanan Vol 17 No 2 (2023): September
Publisher : Faculty of Forestry Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/jik.v17i2.6852

Breeding teak with a clonal system was a common practice to enhance productivity and reduce rotation. A private company in Paliyan Sub-District, Gunungkidul Regency, Indonesia, developed Jati Unggul Nusantara (JUN) through vegetative propagation, particularly cloning, using cuttings. JUN had gained widespread popularity as a replacement for conventional teak varieties for commercial purposes. The utilization of JUN commercial timber left various non-commercial biomass forms, such as leaves, branches, and twigs. This research aimed to assess JUN logging waste biomass's energy potential and characteristics across different tree-age stands. This research used non-commercial biomass from six- and eight-year-old trees, including branches, twigs, leaves, stumps, and unmerchantable top stems. The results showed that the average dry weight of JUN logging waste from six- and eight-year-old trees was 31.5 and 53.5 kg/tree, while the calorific value ranged from 4516.4–5177.7 cal/g. This waste had good characteristics as an energy material, specifically from the part of unmerchantable top stems with a high fuelwood value indexof 6579.6.

Title

Found 7 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 7 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 7 Documents
Search