Garuda - Garba Rujukan Digital

Effect of Tofu Dregs Flour Substitution and Tongkol Fish (Euthynnus affinis) on Patty Burger Quality Muhammad Daiyan; Tengku Mia Rahmiati; Amri Amin
Serambi Journal of Agricultural Technology Vol 2, No 2 (2020): Serambi Journal of Agricultural Technology (December, 2020)
Publisher : Universitas Serambi Mekkah

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32672/sjat.v2i2.2438

Tongkol fish and tofu dregs have protein that can replace as a beef so that they can be used as a filling for burgers. This research used a completely randomized design (CRD) 2 factorial that used was the addition of cob fish = 150 grams, 200 grams and 250 grams and the addition of tofu dregs flour = 40 grams, 60 grams and 80 grams. The best treatment chosen for the results of this study was the quality burger patty with chemical properties of 78.95% water content, 3.38% ash content, content protein 16.54%, color organoleptic test 4.06 (likes), taste 4.00 (likes), texture 3.98 (likes), hedonic color test 4.13 (brownish red), aroma 4.18 (moderate) , texture 3.90 (soft) and unpleasant aroma 3.15 (moderate).

Pengenalan dan Pemanfaatan Limbah Kaca Menjadi Produk Bernilai Rahmawati Cut; Amri Amin; Putri Dini Meutia; Meliyana Meliyana; Muhammad Zardi; Ichsan Syahputra; Tety Sriana; Lusi Dwi Putri; Muhammad Khalis
Dinamisia : Jurnal Pengabdian Kepada Masyarakat Vol. 6 No. 5 (2022): Dinamisia: Jurnal Pengabdian Kepada Masyarakat
Publisher : Universitas Lancang Kuning

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31849/dinamisia.v6i5.11256

Glass waste is harmful if it is disposed of and mixed with other waste. A special disposal site is needed to avoid injuring the hands and feet of the garbage collectors, especially at the Final Disposal Site (TPA). Glass waste highly consists of silica (SiO2), which is needed in cement. Glass waste is crushed by a mechanical method using a crusher, creating glass powder with an average size of 54 µm. Cement is mixed with glass powder in a ratio of 4:1. Water cement factor (FAS) is used at 0.3. The partners in this community service activity are primary school-age children in Ateuk Lam Ura Village, Simpang Tiga District, and Aceh Besar District. The success of the resulting product is indicated by its compressive strength, the hardening of cement and glass powder, and the product's visual appearance without any visible pores. The product has good strength and looks neat with a solid surface. The compressive strength of the product obtained is 3.21. Partners are interested and can apply glass waste to flower pots properly.

Analisis Ketersediaan Air Irigasi dan Kebutuhan Air Irigasi Menggunakan Software Cropwat Version 8.0 Andre Fatahillah; Meliyana Meliyana; Ichsan Syahputra; Amri Amin; Cut Rahmawati
Jurnal Teknik Sipil Unaya Vol 9, No 1 (2023): Januari 2023
Publisher : Center for Research and Community Service (LPPM) University of Abulyatama

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30601/jtsu.v9i1.3337

The balance between availability and demand for water is an important factor determining the productivity of a plant. Imbalance between water availability and water demand can reduce productivity or even crop failure. The main water source that irrigates the Pandrah Irrigation Area comes from the Krueng Pandrah River located in Bireuen Regency, Aceh Province. The Krueng Pandrah watershed has a total area of about 127.24 km2 and has a main river length of 44.37 km. This study aims to determine the amount of irrigation water needed by plants and the available water discharge to meet crop water needs so as to improve the quality of community harvests, especially in Pandrah District, Bireuen Regency. In this study, the calculation of water requirements was carried out using Cropwat version 8.0 software. Cropwat software is an FAO program that is very practical to use to determine the value of plant water needs and irrigation water needs. In determining the 80% reliable discharge, the FJ Mock method is used as a reference to calculate the value of water availability. To find out the value of the water balance between the two, a water balance analysis was carried out. From the research results, it is known that the maximum water demand is 1,694 m3/sec and the minimum water requirement is 1,238 m3/sec. As for the available water to meet the water needs of plants, it is known that the maximum mainstay discharge is 3.46 m3/sec and the minimum reliable discharge is 2.27 m3/sec. From the results obtained and after analyzing the water balance, it is known that the Krueng Pandrah watershed is in a condition of surplus water. Where the water needed by plants can be met properly by available water without deficit during planting. The value between water demand and the availability of existing water has reached a waterbalance so as to avoid crop failure for the community in the Pandrah irrigation area, Bireuen Regency.

Effect of Tofu Dregs Flour Substitution and Tongkol Fish (Euthynnus affinis) on Patty Burger Quality Muhammad Daiyan; Tengku Mia Rahmiati; Amri Amin
Serambi Journal of Agricultural Technology Vol 2, No 2 (2020): Desember
Publisher : Universitas Serambi Mekkah

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32672/sjat.v2i2.2438

Tongkol fish and tofu dregs have protein that can replace as a beef so that they can be used as a filling for burgers. This research used a completely randomized design (CRD) 2 factorial that used was the addition of cob fish = 150 grams, 200 grams and 250 grams and the addition of tofu dregs flour = 40 grams, 60 grams and 80 grams. The best treatment chosen for the results of this study was the quality burger patty with chemical properties of 78.95% water content, 3.38% ash content, content protein 16.54%, color organoleptic test 4.06 (likes), taste 4.00 (likes), texture 3.98 (likes), hedonic color test 4.13 (brownish red), aroma 4.18 (moderate) , texture 3.90 (soft) and unpleasant aroma 3.15 (moderate).

Sifat Fisis Mortar Dengan Perkuatan Serat Kayu Kelapa Sawit dan Crystalline Admixture Tarmizi Tarmizi; Cut Rahmawati; Amri Amin
Jurnal Teknik Sipil Unaya Vol 9, No 2 (2023): Juli 2023
Publisher : Center for Research and Community Service (LPPM) University of Abulyatama

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30601/jtsu.v9i2.4300

The aim of the study was to analyze the physical properties, mechanical properties and effective composition of the fibers in the bio-panel added with PSC and CAs fibers. This research was carried out by making test objects in the laboratory with variations in the addition of fiber 0%, 1%, 2%, 3% with 3 test objects for each variation, the raw materials used were cement, CAs, water and PSC fiber. The tests carried out included testing the physical properties of workability, yield stress, bulk density, and water absorption. The mechanical strength tested was flexural strength and fracture toughness. The results of the workability examination with the addition of 3% fiber can reduce the flow by 22.03%. The results of the yield stress with the addition of 3% KKS fiber can increase the yield stress by 52.91%. From the bulk density results, it showed that the addition of 3% of KKS fiber actually lowered the density. The bulk density values obtained were in the range of 1.2-1.6 g/cm3. And the results of examining the water absorption capacity obtained the lowest water absorption capacity in the test object with the addition of 2% fiber by 4.50%. In the test object with a fiber percentage of 3%, the water absorption capacity reached 5.53%, this was due to the use of too much fiber causing the fibers to agglomerate. The evaluation of physical properties shows that KKS fiber is very potential and feasible as a reinforcement in bio-panel products.

Community Partnership Empowerment Through Utilizing Waste Glass for Construction Products: Pemberdayaan Kemitraan Masyarakat Melalui Pemanfaatan Limbah Kaca Menjadi Produk Konstruksi Rahmawati Cut; Iqbal Iqbal; Meliyana Meliyana; Muhtadin Muhtadin; Muhammad Faisal; Amri Amin; Nasruddin Nasruddin; Abdul Hidayat
Dinamisia : Jurnal Pengabdian Kepada Masyarakat Vol. 7 No. 4 (2023): Dinamisia: Jurnal Pengabdian Kepada Masyarakat
Publisher : Universitas Lancang Kuning

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31849/dinamisia.v7i4.15581

Waste glass constitutes significant landfill waste, leading to environmental concerns. Considering its chemical composition, glass powder contains 50% to 60% silica, making it suitable for construction materials. Consequently, this community service initiative introduced waste glass as a building material, serving as a partial substitute for sand in construction products. In addition, the activity involved teaching partners how to create castings/road gates utilizing waste glass. The target partners in this activity were productive business groups engaged in selling wind holes, well rings, rosters, and similar products. The approach applied involved socialization and hands-on practices at the partner's premises. The program's success was obtained through interviews and product compressive strength tests with the partners. The outcomes demonstrate the partners' keen interest in the activity, their understanding of the benefits of utilizing waste glass as a partial sand replacement, and their ability to create products. Notably, the compressive strength of the products created with the partners ranged from 24.72 MPa to 30.84 MPa, aligning with the SNI 03-2442-1991 standard for road curbs (30 MPa). The activity positively impacted the partners, enhancing their business prospects and contributing to environmental sustainability. The training helps in enhancing the partners' skills and capabilities.

Title

Found 6 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 6 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 6 Documents
Search