Claim Missing Document
Check
Articles

Found 6 Documents
Search

PERTUMBUHAN STEK JABON MERAH ([Roxb.] Havil) Anthocephalus macrophyllus PADA BERBAGAI MEDIA DAN ZAT PENGATUR TUMBUH Danu Danu; Kurniawati Purwaka Putri; Atok Subiakto
Jurnal Penelitian Hutan Tanaman Vol 12, No 2 (2015): JURNAL PENELITIAN HUTAN TANAMAN
Publisher : Pusat Penelitian dan Pengembangan Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (528.086 KB) | DOI: 10.20886/jpht.2015.12.2.123-130

Abstract

Tanaman jabon merah ( (Roxb.) Havil) merupakan jenis alternatif yang diprioritaskan Anthocephalus macrophyllus dalam pembangunan hutan tanaman penghasil kayu. Teknik perbanyakan vegetatif merupakan salah satu alternatif untuk memperbanyak jenis tanaman ini. Penelitian ini bertujuan untuk mengetahui pengaruh beberapa media dan pemberian zat pengatur tumbuh terhadap pertumbuhan stek jabon merah. Rancangan penelitian menggunakan Rancangan Faktorial dalam Rancangan Acak Lengkap (RAL) dengan dua faktor. Faktor pertama media stek terdiri atas 4 taraf yaitu media pasir, zeolit, campuran serbuk sabut kelapa + arang sekam padi (2:1,v/v), serbuk sabut kelapa + sekam padi (2:1;v/v); dan faktor kedua zat pengatur tumbuh terdiri atas 4 taraf yaitu kontrol, 0 ppm,500 ppm, 750 ppm, dan 1.500 ppm. Setiap perlakuan diulang 3 kali dan setiap ulangan terdiri dari 20 stek. Bahan stek yang digunakan adalah bagian pucuk asal anakan umur enam bulan. Hasil penelitian menunjukkan bahwa untuk perbanyakan tanaman jabon merah dengan bahan stek dari induk tanaman berumur muda dapat dilakukan menggunakan media pasir tanpa diberi zat pengatur tumbuh, pada media dengan diberi zat pengatur tumbuh ziolit 500 ppm, pada media serbuk sabut kelapa + arang sekam padi bisa diberi zat pengatur tumbuh 750 ppm, sedangkan pada media serbuk sabut kelapa + sekam padi diberi zat pengatur tumbuh 1.500 ppm.
UJI PENANAMAN ASAL KEBUN BENIH PARUNG PANJANG DI BEBERAPA LOKASI DI JAWA BARAT Kurniawati Purwaka Putri; Dede J. Sudradjat
Jurnal Penelitian Hutan Tanaman Vol 8, No 2 (2011): JURNAL PENELITIAN HUTAN TANAMAN
Publisher : Pusat Penelitian dan Pengembangan Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20886/jpht.2011.8.2.111-123

Abstract

Sumber benih akan menentukan kualitas genetik benih dan saran kemana benih tersebut harus disebarkan (seed zone). Untuk mengetahui hal tersebut cara yang paling tepat adalah melalui uji penanaman. Tujuan dari  penelitian  ini  adalah  untuk  menguji  penampilan tanaman A. mangium dari  kebun benih Parung panjang, dan untuk mengetahui produktivitas tegakan  pada beberapa jarak tanam di 4 lokasi di Jawa Barat yaitu di BKPH Tenjo, BKPH Maribaya, BKPH Gunung Kencana Selatan, dan BKPH Cibenda. Penelitian ini dibangun dengan menggunakan rancangan acak lengkap berblok dengan menggunakan jarak tanam sebagai perlakuan. Lokasi BKPH Tenjo menggunakan 2 jarak tanam (3 m x 3 m, 4 m x 4 m) yang diulang 2 kali. Lokasi BKPH Maribaya menggunakan 3 jarak tanam (2 m x 3 m, 3 m x 3 m, 4 m x 4 m) yang diulang sebanyak 2 kali. Lokasi BKPH Cibenda digunakan jarak tanam 3 m x 3 m, 3 m x 4 m, 3 m x 5 m yang diulang sebanyak 3 kali. Khusus di lokasi BKPH Gunung Kencana digunakan rancangan petak terbagi dengan 2 jarak tanam (3 m x 3 m, 4 m x 4 m) yang ditanam pada 3 blok dan menggunakan 2 asal sumber benih (lokal dan kebun benih Parung panjang). Hasil penelitian menunjukkan bahwa produktivitas tanaman A. mangium asal kebun benih Parungpanjang di empat lokasi yang diujikan bervariasi yang dipengaruhi oleh kondisi tapak dan iklim setempat. Namun bila dibandingkan dengan benih lokal, benih asal kebun benih tersebut relatif lebih unggul. Produktivitas tegakan A. mangium asal kebun benih Parungpanjang terbesar ditunjukkan di lokasi BKPH Gunung Kencana (15,8 m untuk tinggi; 17 cm untuk diameter), dengan riap optimal dapat mencapai 54 m3/ha/tahun (28,6% lebih baik dari tegakan asal benih lokal). Dengan demikian benih dari kebun benih tersebut dapat menjadi sumber materi penanaman di wilayah Jawa Barat yang memiliki kondisi tapak hampir sama. Untuk meningkatkan pertumbuhan khususnya diameter, jarak dapat yang lebih lebar dapat dipertimbangkan.
Regeneration of Shorea spp. in the Seed Sources of KHDTK Haurbentes. Bogor District Kurniawati Purwaka Putri; Dede J. Sudrajat
Jurnal Perbenihan Tanaman Hutan Vol 5, No 2 (2017): Jurnal Perbenihan Tanaman Hutan
Publisher : Forest Tree Seed Technology Research & Development Center (FTSTRDC)/ Balai Penelitian dan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (152.261 KB) | DOI: 10.20886/bptpth.2017.5.2.71-79

Abstract

The role and function of forest area with special purpose (KHDTK) Haurbentes among other are the source of seeds and germplasm of Shorea spp. The information of the potency and dominance of Shorea spp. in KHDTK Haurbentes was indispensable in formulating the seed source management strategy. The aim of the research was to determine the regeneration level of Shorea spp. in Haurbentes KHDTK. The research was conducted in KHDTK Haurbentes in Jasinga, Bogor District. The research method used vegetation analysis. Observation plots were built based on the design of cluster plot Forest Health Monitoring circular (annular plot). Number of cluster plot of 6 pieces was set purposively. The results showed that S. pinanga was dominant species for the level of the tree, pole, sapling and seedling in cluster plots 1 and 7. The vegetation of trees level were dominated by S. stenoptera (cluster plots 2, 6, 8) and S. selanica (cluster plot 3). Vegetation of pole level were dominated by S. stenoptera (clusters plots 6 and 8) and S. selanica (cluster plots 2 and 3). H. mangarawan and S. mecisopteryx were dominant species for the level of sapling in clusters plot 6 and 8. Peuris and harendong (Melastoma polyanthum Bl) were dominant species at sapling level in cluster plots 2 and 3 for shrubs, while for species of shorea, the dominant species were S. stenoptera (clusters plots 2) and S. selanica (clusters plots 3). The dominant species at seedling level were H. mangarawan (clusters plot 2), S. mecisopteryx (clusters plot 3), S. selanica (clusters plot 6) and S. Stenoptera (cluster plots 8). The density of dominant species for the tree level was varied among cluster plots with a range of 55-143 individuals/hectare. Shorea spp. in KHDTK Haurbentes was sufficient with the number of individual regeneration more than adult trees. The sustainability of seed sources Shorea spp. in KHDTK Haurbentes in the future is quite assured.
The Influence of Pruning Shoot Age on the Growth of Hopea odorata Roxb. Cutting Nurmawati Siregar; Kurniawati Purwaka Putri
Jurnal Perbenihan Tanaman Hutan Vol 7, No 2 (2019): Jurnal Perbenihan Tanaman Hutan
Publisher : Forest Tree Seed Technology Research & Development Center (FTSTRDC)/ Balai Penelitian dan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (210.933 KB) | DOI: 10.20886/bptpth.2019.7.2.77-85

Abstract

Propagation of Hopea odorata Roxb. could be carried out through the vegetative methods by cuttings. Material cuttings with a high juvenility are obtained by pruning a stock plant. Information on shoot age after pruning as material cuttings were still limited. The purpose of this study was to determine the effect of shoot age after pruning on the successful propagation of H. odorata cuttings. The study design was a randomized block design with shoot age treatments of 3, 4, 5 and 6 months. Each treatment was placed in 5 blocks and each treatment consisted of 20 cuttings. Growth response of cuttings observed was cutting survival percentage, shoot height, root length, root dry weight, shoot dry weight, carbon, and nitrogen content. The results showed that the age of pruning shoots had a significant effect on all measured growth response of cuttings. H. odorata cuttings from orthotropic shoots aged 4 and 5 months after pruning showed cutting survival percentage, shoot height, root length, shoot and root dry weight were higher than shoots aged 3 and 6 months after pruning. The age of 6 months pruning shoots showed the highest C/N ratio (18.14) and carbon content (47.48 percent), but but the lowest nitrogen content (2.62 percent). The percentage of woody on shoots aged 4 and 5 months after pruning was 50%, while almost all of the cuttings on shoots of the age of 6 months were woody. The best propagation material for H. odorata cuttings was orthotropic shoots aged 5 months after pruning, because of the high cuttings survival percentage (94.18 percent). In addition C/N ratio from shoot aged 5 months (15,11) was higher than from shoot aged 4 months (13,14).
PENGARUH BAHAN SETEK DAN ZAT PENGATUR TUMBUH TERHADAP KEBERHASILAN SETEK PUCUK MALAPARI (Pongamia pinnata) Rina Kurniaty; Kurniawati Purwaka Putri; Nurmawati Siregar
Jurnal Perbenihan Tanaman Hutan Vol 4, No 1 (2016): Jurnal Perbenihan Tanaman Hutan
Publisher : Forest Tree Seed Technology Research & Development Center (FTSTRDC)/ Balai Penelitian dan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (498.208 KB) | DOI: 10.20886/bptpth.2016.4.1.1-8

Abstract

Pertumbuhan setek dipengaruhi oleh faktor bahan tanaman (genetik) dan faktor lingkungan. Faktor bahan tanaman meliputi kandungan cadangan makanan, hormon endogen dalam jaringan setek, umur pohon induk, dan tingkat juvenilitas. Tujuan penelitian untuk mengetahui pengaruh asal bahan setek dan zat pengatur tumbuh terhadap keberhasilan perbanyakan vegetatif setek malapari. Rancangan percobaan yang digunakan adalah rancangan acak lengkap (RAL) pola faktorial dengan dua faktor yaitu asal bahan setek (anakan dan tunas pangkasan) dan konsentrasi zat pengatur tumbuh IBA (0 ppm; 250 ppm; 500 ppm) dengan 4 kali ulangan. Setiap ulangan terdiri dari 45 setek. Hasil penelitian menunjukkan bahwa materi setek pucuk terbaik adalah tunas dari bibit umur 5 bulan dengan persen setek berakar, jumlah akar panjang akar dan berat kering akar masing-masing adalah 96,05 %; 4,26 helai; 9,5cm dan 0,07 g. Zat pengatur tumbuh IBA hingga 500 ppm belum berpengaruh terhadap keberhasilan perakaran setek. Interaksi antara materi tunas dari tunas bibt dengan penambahan IBA 500 ppm menghasilkan berat kering akar setek tertinggi (0,088 g).
POTENSI JENIS SENGON (Falcataria moluccana (MIQ.) BARNEBY & J.W. GRIMES) DIPERBANYAK MELALUI TEKNIK VEGETATIF (STEK) Potency of Sengon ( Falcataria moluccana (MIQ.) BARNEBY & J.W. GRIMES) Propagation Throught Vegetative Technique (Cutting) Dharmawati F. Djam’an; Kurniawati Purwaka Putri; Danu Danu
Jurnal Hutan Tropis Vol 6, No 1 (2018): Jurnal Hutan Tropis Volume 6 Nomer 1 Edisi Maret 2018
Publisher : Lambung Mangkurat University-Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/jht.v6i1.5100

Abstract

The sengon plant (Falcataria moluccana (Miq.) Barneby & J.W. Grimes) is the mainstay of community forests, especially in Java. During this time, the seed is used as material for seed production. However, at this time began to find a rust attack puru at the level of seedlings are allegedly carried by seed disease. Therefore, there is a need for other techniques to prevent transmission at the seedling level in the nursery. Vegetative technique is one that can be used to break the path of plant diseases by using healthy ingredients and free from disease. This research is aimed to know the potential of sengon plant to be propagated vegetatively, by cuttings method. The method of cuttings used is shoot cuttings and stem cuttings, and the source of cuttings derived from plants aged 1 and 2 years. The results showed that the highest live percentage was stem cuttings originating from 1 year old plant (34.66%), while the live percentage for stem cuttings originating from 2 year old plants was still very low (3.33%).Keywords: Sengon Plant; Vegetative Propogation; Cutting SourceTanaman sengon (Falcataria moluccana (Miq.) Barneby & J.W. Grimes) merupakan jenis andalan hutan rakyat, khususnya di Pulau Jawa. Selama ini, benih digunakan sebagai bahan untuk produksi bibit.  Akan tetapi, saat ini mulai ditemukan serangan karat puru pada tingkat semai yang disinyalir penyakit ini terbawa benih. Oleh karena itu perlu adanya teknik lain untuk mencegah penularan pada tingkat bibit di persemaian.  Vegetatif teknik merupakan salah satu yang dapat digunakan untuk memutus jalur penyakit tanaman dengan menggunakan bahan tanaman yang sehat dan bebas dari penyakit.  Penelitian ini bertujuan mengetahui potensi tanaman sengon untuk diperbanyak  secara vegetative, dengan metode setek. Metode setek yang digunakan adalah setek pucuk dan stek batang, dan sumber bahan stek berasal dari tanaman yang berumur 1 dan 2 tahun. Hasil penelitian menunjukkan bahwa persentase hidup tertinggi adalah pada stek batang yang berasal dari tanaman berumur 1 tahun (34.66%), sedangkan persentase hidup untuk stek batang yang berasal dari tanaman umur 2 tahun masih sangat rendah (3,33%).Kata kunci: Tanaman sengon, perbanyakan vegetative, sumber bahan setek