Claim Missing Document
Check
Articles

Found 6 Documents
Search

Optimization of Quality Improvement and Production Capacity at Prayogo's Chicken Slaughterhouse SME Tonny Yuniarto; Paulus Wisnu Anggoro; Baju Bawono
Journal of Innovation and Community Engagement Vol. 3 No. 4 (2022)
Publisher : Fakultas Teknik Universitas Kristen Maranatha

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28932/ice.v3i4.5577

Abstract

Moyudan Subdistrict is an area that has several small industries of chicken farming. Partner who was the participant of this community service program, Prayogo’s Chicken Slaughterhouse, an SME in Yogyakarta, had a major obstacles to increase the production capacity of good, neat, clean, and hygienic chicken meat and meeting halal standards. In addition, this business still did not have chicken cutting standards according to factory standards (SNI 01-6160-1999). The cutting process was still done manually and conventionally, with mediocre quality and quantity. Production capacity was low, and many production operators experienced high fatigue in the hands and shoulders or experienced musculoskeletal fatigue. The expected transfer of technology in this program is the design of modifications to poultry cutting machines that suit the needs of this partner and is associated with the selection of portable poultry machine designs and manufacturing technologies that can later improve the quality and capacity of chicken meat processing according to halal standards. The results of this community service activity are; (1) one unit of portable poultry machine given to partner; (2) an increase in production capacity of 429% in terms of cutting capacity per day with smooth, precise, and accurate cutting quality; (3) reduced fatigue experienced by the production operators after the machine in operation. The chicken cutting capacity of Prayogo's Chickens Slaughterhouse can be increased by 4.29 times from 75 chickens a day to a maximum of 321 chickens a day.
Optimasi Parameter Mesin, Kualitas dan Kapasitas Produksi Alat Potong Ayam di Rumah Pemotongan Ayam Baju Bawono; Tonny Yuniarto; Paulus Wisnu Anggoro
Seminar Nasional Penelitian dan Abdimas Vol 1 No 1 (2023): Juni
Publisher : Lembaga Penelitian dan Pengabdian pada Masyarakat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24002/senapas.v1i1.7270

Abstract

Sleman Regency is an area that accommodates several small chicken industries. This research uses four partners, namely Chicken Slaughterhouse Small Medium Enterprises (SMEs)  Arisa, Lasno, Ipin, Prayogo) which have significant obstacles in increasing the production capacity of good, neat, clean, and hygiene chicken meat and meeting halal standards. The cutting process is still manual and conventional, with quality and production capacity still minor and major fatigue impacts cutting operators. The purpose of Community Service (Abdimas) is the design of modified poultry slaughter machines that suit the needs of these partners and is associated with the selection of portable poultry machine design and manufacturing technology that can later improve the quality and capacity of proper chicken meat slaughter . The final result of this abdimas activity is in the form of (1) one unit of portable poultry machine tested to 4 partners (2) there was an increase in production capacity by 400%, up to 443% in terms of cutting capacity/day with fine cutting quality, precision (3) reduced fatigue experienced by chicken slaughter operators after the tool was completed within 7 hours / day and optimal production capacity increased 4 times, and the slaughter time of chickens is reduced by 75%.
PengembanganVariasi Desain Berbasis Artistic Computer Aided Manufacturing (ArtCam) dan Rapid Prototyping (RP) untuk Meningkatkan Daya Saing Souvenir Baju Bawono; P. Wisnu Anggoro; A. Tonny Yuniarto Yuniarto
Jurnal METRIS Vol. 16 No. 01 (2015): 2015
Publisher : Prodi Teknik Industri, Fakultas Teknik - Universitas Katolik Indonesia Atma Jaya

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The purpose of this study was to improve product design variations artistic brass souvenirs through of technology Rapid Prototyping (RP) to create the master mold brass products so as to increase the competitiveness of the product in the eyes of consumers. Market research will be conducted to identify consumer buying interest and identify distinguishing excellence needed to build the concept of product development brass. The research results in the form of a distinctive design trades selected areas further using software designed Artistic Computer Aided Manufacturing (ArtCAM) and translated into a master mold by a 3D engine utilizing Object 30Pro RP technology. This research will be focused on optimizing the manufacturing process so that the brass souvenirs is expected to appear as a continuous improvement effort to improve the competitiveness of the industrial centers Ngawen souvenirs.
Peluang dan Sifat Mekanis Serat Alam Non-Kayu dalam Pembuatan Papan Partikel (Review Paper) Nugroho Mamayu Hayuning Bawono; Baju Bawono; Bondan Wiratmoko; Yotam Stefanditya; Paulus Wisnu Anggoro
Jurnal Rekayasa Mesin Vol 18, No 3 (2023): Volume 18, Nomor 3, Desember 2023
Publisher : Mechanical Engineering Department - Semarang State Polytechnic

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32497/jrm.v18i3.5058

Abstract

Penelitian mengenai inovasi produk dalam material komposit merupakan urgensi, salah satu industri yang memiliki potensi inovasi adalah wood-based panels (WBPs) khususnya papan partikel. Selama ini kayu masih menjadi bahan utama dalam produksi papan partikel. Akan tetapi kesadaran konsumen mengenai dampak penggunaan kayu secara berlebih mendorong industri ini untuk mencari alternatif pengganti kayu. Pada penelitian ini dilakukan review yang bertujuan untuk mengetahui, membandingkan, dan mencari peluang serat alam non-kayu sebagai material dalam papan partikel. Berdasarkan 11 jurnal yang telah diulas dari berbagai peneliti di dunia didapatkan hasil bahwa penggunaan serat alam non-kayu adalah feasible jika material tersebut memiliki karakteristik mekanis yang mirip dengan kayu. Serabut kelapa merupakan serat alam yang memiliki potensi menjadi material pengganti kayu pada produk papan partikel. Modulus of elasticity (MOE) dan modulus of rupture (MOR) Spesimen yang telah diuji oleh berbagai peneliti menunjukkan bahwa sifat mekanis serabut kelapa memiliki kemiripan dengan kayu dengan beberapa penyesuaian seperti homogenisasi ukuran partikel dan jenis perekat yang digunakan. Maka dapat disimpulkan bahwa serabut kelapa merupakan salah satu material potensial yang membutuhkan pengembangan lebih lanjut.
Perilaku Penyerapan Air Terhadap Sifat Mekanik Biokomposit Serat Kenaf/Rami Haniel Haniel; Baju Bawono; Paulus Wisnu Anggoro
Jurnal Rekayasa Mesin Vol 18, No 1 (2023): Volume 18, Nomor 1, April 2023
Publisher : Mechanical Engineering Department - Semarang State Polytechnic

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32497/jrm.v18i1.3997

Abstract

Penggunaan komposit yang diperkuat serat alam berkembang pesat di industri otomotif. Biokomposit adalah material komposit yang terdiri dari matriks polimer dan penguat serat alami. Serat alam dapat menggantikan bahan tradisional yang tidak terbarukan. Namun, biokomposit memiliki daya serap air, yang dapat mempengaruhi sifat mekanik yang menentukan kualitas biokomposit dalam aplikasi otomotif. Oleh karena itu, perlu dilakukan pemeriksaan pengaruh perilaku penyerapan air pada biokomposit yang dapat mempengaruhi sifat mekanik. Hasil penelitian ini menunjukkan bahwa perilaku penyerapan air biokomposit berpengaruh positif. Terjadi peningkatan nilai kekuatan impak dari 0.24 menjadi 0.27 (J/mm2), begitu juga dengan nilai kekuatan lentur dari 94.86 menjadi 96.74 (MPa). Temuan yang didapat dalam penelitian ini melengkapi analisis pada penelitian sebelumnya, biokomposit cocok digunakan dalam aplikasi luar ruangan seperti komponen pada kendaraan.
Optimasi Pengembangan Desain Ukiran Daun Pintu Presisi dan Unik Pada Industri Kayu dengan Sentuhan Artistic CAD/CAM Baju Bawono; Tonny Yuniarto; Paulus Wisnu Anggoro; Wardana Wahyu Dharsono
Seminar Nasional Penelitian dan Abdimas Vol 2 No 1 (2024): Juni
Publisher : Lembaga Penelitian dan Pengabdian pada Masyarakat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24002/senapas.v2i1.9247

Abstract

Market competition in the wood processing industry, especially furniture products, door leaves, windows, frames, and interior crafts, is getting tighter. Frames and interior crafts is getting tighter. The need for new breakthroughs in developing uniquely patterned doors leaves us with technology to continue sales in an increasingly tight market. One aspect of producing unique patterned door leaves is Indonesian Batik ornaments using Artistics CAD / CAM technology and CNC Router machines. Using this technology, this community service goal of making door leaves patterned with Indonesian Batik ornaments helps SME entrepreneurs compete with better results. The method applied is the development and explorative manufacture of uniquely patterned door leaves with the application of advanced technology software engineering, artistic technology CAD/CAM, and CNC router machines. Process selection using this technology can save 1440 to 538 minutes or 62.64%. The optimal parameter conditions are A2, B2, C3, D3, E3. The optimal simulation and machining time (TS) is 481.56 minutes, and the optimum TR is 538 minutes. Technology produces quality and precision products at a lower cost, from Rp 1.2 million/m2 to Rp 500,000/m2, reduced by 37.36% from the original.