This Author published in this journals
All Journal REKA RACANA
Heldys Nurul Siska
Unknown Affiliation

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Karakterisasi Sifat Fisis dan Mekanis Tanah Lunak di Gedebage Heldys Nurul Siska; Yuki Achmad Yakin
RekaRacana: Jurnal Teknil Sipil Vol 2, No 4: Desember 2016
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/rekaracana.v2i4.44

Abstract

ABSTRAKAcuan data mengenai karakterisasi tanah lunak diperlukan, sehubungan dengan peningkatan pembangunan yang pesat di daerah tanah lunak. Karakterisasi tanah lunak di Gedebage yang meliputi data fisis dan mekanis. Berdasarkan grafik hubungan batas cair dan indeks plastisitas, maka tanah ini tergolong tanah lempung tak organik dengan plastisitas tinggi dan tanah lanau tak organik. Indeks properties tanah lunak Gedebage terdiri atas kadar air (105,4% - 315,5%), angka pori (1,23 - 7,26) dan berat jenis (2,1 - 2,67). Adapun parameter kuat gesernya meliputi cu (0,01 - 0,25 kg/cm2) dan Øu (0,2° - 5,5°). Parameter deformasinya menunjukkan nilai sedang sampai tinggi dan kompresibilitas yang besar. Uji triaksial unconsolidated undrained dan uji oedometer pada program PLAXIS 2D AE menghasilkan tegangan deviator dan regangan yang hampir sama dengan pengujian di laboratorium. Model hardening soil paling tepat digunakan sebagai modelisasi untuk jenis tanah lunak di Gedebage.Kata kunci: index properties, kuat geser, kompresibilitas, uji triaksial unconsolidated undrained, uji oedometer. ABSTRACTIt is necessary that a data base on soft soil is characterization, in relation with a fast development in this area. Characterized of soft soil in Gedebage consisted of physical and engineering data. Based on plasticity chart, liquid limit and index plasticity, this soil belongs to anorganic clay with high plasticity and anorganic silt. Index properties of Gedebage soft soil consist of water content (105.4% - 315.5%), void ratio (1.23 – 7.26) and specific gravity (2.1 – 2.67). The shear strength parameters consist of cu (0.01 – 0.25 kg/cm2) and Øu (0.2° - 5.5°). Deformation parameter indicates medium to high compressibility. Triaxial unconsolidated undrained test and oedometer test in the PLAXIS 2D AE program produces deviator strength and strain of soft soil which was similar to the test in the laboratory. The hardening soil model was appropriate to be used as the model in the PLAXIS 2D AE program for the type of soft soil at Gedebage.Keywords: index properties, shear strength, compressibility, triaxial unconsolidated undrained test, oedometer test.
Perilaku Tiang Pancang Tunggal pada Tanah Lempung Lunak di Gedebage Yuki Achmad Yakin; Heldys Nurul Siska; Wanda Azka Alawiah
RekaRacana: Jurnal Teknil Sipil Vol 3, No 1: Maret 2017
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/rekaracana.v3i1.36

Abstract

ABSTRAKDeposit tanah lunak di Gedebage merupakan tanah lempung lunak non organik dengan plastisitas tinggi, dengan parameter fisis: kadar air (105,4% - 315,5%), batas cair (100% - 375%) dan angka pori (1,23 – 7,26). Sedangkan parameter teknis menunjukkan kohesi tak teralir (0,01 kg/cm2 – 0,25 kg/cm2) dan sudut geser dalam (0,20 – 5,50)  serta indeks kompresi (2-5). Hal ini menujukkan kuat geser yang rendah dan kompresibilitas yang tinggi. Daya dukung izin tiang pada deposit tanah lunak di Gedebage dengan panjang tiang 33,5 m, dilakukan dengan metode statik, metode N-SPT dan metode Mazurkiewicz yang berturut-turut menghasilkan nilai 185 ton, 155 ton dan 268 ton. Metode Mazurkiewicz adalah metode yang paling mendekati nilai daya dukung hasil uji rata-rata, yaitu 283 ton.Kata kunci: lempung lunak, kompresibilitas tinggi, daya dukung ultimit ABSTRACTDeposite of soft soil in Gedebage is non-organic soft clay with high plasticity and physics parameters: water content (105.4% - 315.5%), liquid limit (100%-375%) and void ratio (1.23 – 7.26). Engineering parameters show undrained cohesion (0.01 kg/cm2 – 0.25 kg/cm2), friction angle (0.20 – 5.50) and compression index (2 – 5). These indicate low shear strength and high compressibility. Allowable bearing capacity of pile at soft clay deposite in Gedebage with 33.5 m length of pile, calculated by static method, N-SPT method and Mazurkiewicz method with value of 185 tons, 155 tons and 268 tons. Mazurkiewicz method is the most reasonable value based on the average value of tests, namely 283 tons.Keywords: soft clay, high compressibility, ultimite bearing capacity