Muhammad Nadjib
Unknown Affiliation

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Penentuan Nilai Kalor Eksperimental LPG dengan Variasi Udara Berlebih dan Variasi Debit LPG 0,4; 0,5; dan 0,6 LPM Tito Hadji Agung Santosa; Muhammad Nadjib; Hardhany Faiz Ikhsan; Tayuh Kinayung Waskitho; Fiqri Elpa Ramadhany
JMPM (Jurnal Material dan Proses Manufaktur) Vol 6, No 1 (2022): Juni
Publisher : Universitas Muhammadiyah Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.18196/jmpm.v6i1.15728

Abstract

Setiap bahan bakar memiliki nilai kalor (NK) yaitu energi yang dikandung dalam setiap massa dari bahan bakar. Penentuan nilai kalor bahan bakar gas dapat dilakukan dengan kalorimeter aliran. Penelitian ini menggunakan LPG sebagai bahan penelitian. Untuk menjamin semua bahan bakar terbakar, digunakan udara berlebih (excess air). Tujuan dari penelitian ini yaitu untuk mendapatkan NK eksperimental LPG dan efisiensi kalorimeter aliran dengan variasi udara berlebih (excess air). Penelitian ini menggunakan metode pembakaran aktual dengan debit LPG 0,4; 0,5; dan 0,6 LPM dan tujuh variasi excess air (EA) 0% hingga 60% dengan interval variasi 10%. Dari hasil perhitungan didapatkan NK eksperimental dan efisiensi kalorimeter aliran yang mendekati NK LPG teoritik yaitu pada EA 50% sebesar 41.042,16 kJ/kg dan 85%. Namun pada variasi EA 60%, NK eksperimental dan efisiensi mengalami penurunan nilai yaitu 38.142,44 kJ/kg dan 78,66%. Dapat disimpulkan bahwa NK eksperimental LPG naik seiring dengan naiknya udara berlebih hingga 50% dan selanjutnya turun pada udara berlebih 60% karena penambahan udara berlebih selanjutnya akan bersifat sebagai pendinginan. Each fuel has a heating value (HV) which is the energy contained in each mass of the fuel. Determination of the heating value of gas fuel can be done with a flow calorimeter. This research uses LPG as research material. To ensure that all fuel is burned, excess air is used. The purpose of this study was to obtain experimental LPG heating value and flow calorimeter efficiency with excess air variations. This study uses the actual combustion method with an LPG discharge of 0.4; 0.5; and 0.6 LPM and seven variations of excess air (EA) from 0% to 60% with a variation interval of 10%. From the calculation results obtained experimental HV and flow calorimeter efficiency close to theoretical LPG HV, namely at 50% EA of 41,042.16 kJ/kg and 85%. However, at 60% EA variation, experimental HV and efficiency decreased in value, namely 38,142.44 kJ/kg and 78.66%, respectively. It can be concluded that the experimental HV of LPG increases with the increase in excess air by up to 50% and then decreases at 60% excess air because the addition of excess air will act as cooling.
Effect of Density and Viscosity on Injection Characteristic of Jatropha - waste Cooking Oil Biodiesel Mixture. Mariono Mariono; Wahyudi Wahyudi; Muhammad Nadjib
JMPM (Jurnal Material dan Proses Manufaktur) Vol 7, No 1 (2023): Juni
Publisher : Universitas Muhammadiyah Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.18196/jmpm.v7i1.17896

Abstract

Biodiesel has an important role in the world of transportation and its existence is taken into account. So the availability of biodiesel fuel in the future will be difficult to eliminate and must continue to be fulfilled. Therefore, it is necessary to innovate to increase the availability of biodiesel fuel. Biodiesel can be made from biological materials and includes renewable energy as a substitute for diesel oil. The production of biodiesel in this study jatropha and waste cooking oil as raw materials. This study aims to determine the effect of density and viscosity on the injection characteristics of jatropha-waste cooking oil biodiesel mixtures (1:4 and 4:1) on various B5-B40 fuels. Production of biodiesel from jatropha and waste cooking oil through degumming, esterification and transesterification processes. The results showed that the jatropha-waste cooking oil biodiesel mixed with 1:4 level B15 and 4:1 mixed with B10 level complied with SNI 7182-2015 biodiesel standards. The higher the density and viscosity values of jatropha-waste cooking oil biodiesel, the narrower the spray angle and the longer the spray penetration