Article Per Year (5 Year)
p-Index From 2021 - 2026
0.961
P-Index
This Author published in this journals
All Journal Bulletin of Chemical Reaction Engineering & Catalysis Bulletin of Chemical Reaction Engineering & Catalysis
Shamala Gowri Krishnan
College of Graduate Studies, Universiti Tenaga Nasional, 43000 Kajang, Selangor
Chemical Engineering, Chemistry & Bioengineering Chemistry

Published : 6 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 6 Documents
Search

 1 
Synthesis of Magnetic Base Catalyst from Industrial Waste for Transesterification of Palm Oil Shamala Gowri Krishnan; Fei-Ling Pua; Hong-Hua Lim
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 1 Year 2022 (March 2022)
Publisher : Department of Chemical Engineering - Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.1.12412.53-64

Abstract

Industrial waste is produced in large amounts annually; without proper planning, the waste might cause a serious threat to the environment. Hence, an industrial waste-based heterogeneous magnetic catalyst was synthesized using carbide lime waste (CLW) as raw material for biodiesel production via transesterification of palm oil. The catalyst was successfully synthesized by the one-step impregnation method and calcination at 600 °C. The synthesized catalyst, C-CLW/g-Fe2O3, was characterized by temperature-programmed desorption of carbon dioxide (CO2-TPD), scanning electron microscopy (SEM), electron dispersive X-ray spectroscopy (EDX), X-ray Diffraction (XRD), Brunauer-Emmett-Teller (BET), vibrating sample magnetometer (VSM), and Fourier transform infrared spectroscopy (FT-IR). The catalyst has a specific surface area of 18.54 m2/g and high basicity of 3,637.20 µmol/g. The catalytic performance shows that the optimum reaction conditions are 6 wt% catalyst loading, 12:1 methanol to oil molar ratio with the reaction time of 3 h at 60 °C to produce 90.5% biodiesel yield. The catalyst exhibits good catalytic activity and magnetism, indicating that the CLW can be a potential raw material for catalyst preparation and application in the biodiesel industry. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
Synthesis of Magnetic Catalyst Derived from Oil Palm Empty Fruit Bunch for Esterification of Oleic Acid: An Optimization Study Shamala Gowri Krishnan; Fei-Ling Pua; Ee-Sann Tan
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 1 Year 2022 (March 2022)
Publisher : Department of Chemical Engineering - Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.1.12392.65-77

Abstract

Biomass, renewable, abundantly available and a good source of energy. The conversion of biomass waste into valuable products has received wide attention. In this study, an empty fruit bunch (oil palm EFB) supported magnetic acid catalyst for esterification reaction was successfully prepared via the one-step impregnation process. The new magnetic catalyst achieved a higher surface area of 188.87 m2/g with a total acidity of 2.4 mmol/g and identified iron oxide as g-Fe2O3. The magnetization value of 24.97 emu/g demonstrated that the superparamagnetic catalyst could be easily recovered and separated after the reaction using an external magnet. The catalytic performance of oil palm EFB supported magnetic acid catalyst was examined by esterification of oleic acid. Esterification process parameters were optimized via Response Surface Methodology (RSM) optimization tool with Box-Behnken design (BBD). The following optimum parameters were determined: an amount of 9 wt% catalyst, molar ratio of methanol to oleic acid of 12:1, reaction time of 2 h and reaction temperature of 60 °C with a maximum conversion of 94.91% was achieved. The catalyst can be recycled up to five cycles with minimal loss in its activity. The oil palm waste-based magnetic acid catalyst indicates its potential replacement to the existing solid catalysts that are economical and environmentally friendly for the esterification process in biofuel applications. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
Synthesis of Carbide Lime Waste Derived Base Catalyst (KF/CLW-Fe3O4) for Methyl Ester Production: An Optimization Study Hong Hua Lim; Fei Ling Pua; R. Othman; Yun Hin Taufiq-Yap; Shamala Gowri Krishnan
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 1 Year 2022 (March 2022)
Publisher : Department of Chemical Engineering - Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.1.12348.127-134

Abstract

In this paper, solid base catalyst KF/CLW-Fe3O4 was prepared from carbide lime waste, primarily calcium hydroxide with tiny amounts of carbonate and; the catalyst was used in the optimization study on the methyl ester production. The new strong base catalyst was synthesized by chemical impregnation. This catalyst was characterized by Hammett indicator analysis, Brunauer, Emmett, and Teller (BET), scanning electron microscope (SEM), X-ray diffraction (XRD) and temperature-programmed desorption (TPD) of carbon dioxide. The catalyst was further used to catalyzed the transesterification reaction to produce methyl ester. Taguchi method was used to assess the impact of catalyst at different intervals of reaction parameters, including reaction time, methanol to oil ratio, and catalyst loading. A mixed level of orthogonal array design with L9, analysis of variance (ANOVA) and signal to noise ratio were used to determine parameters that significantly impact the palm oil transesterification reaction. High methyl ester conversion was attained, and the catalyst can be easily separated and reused. KF/CLW-Fe3O4 has great potential to be used to produce methyl ester because of its high catalytic activity and environmental friendliness. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
Synthesis of Magnetic Base Catalyst from Industrial Waste for Transesterification of Palm Oil Shamala Gowri Krishnan; Fei-Ling Pua; Hong-Hua Lim
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 1 Year 2022 (March 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.1.12412.53-64

Abstract

Industrial waste is produced in large amounts annually; without proper planning, the waste might cause a serious threat to the environment. Hence, an industrial waste-based heterogeneous magnetic catalyst was synthesized using carbide lime waste (CLW) as raw material for biodiesel production via transesterification of palm oil. The catalyst was successfully synthesized by the one-step impregnation method and calcination at 600 °C. The synthesized catalyst, C-CLW/g-Fe2O3, was characterized by temperature-programmed desorption of carbon dioxide (CO2-TPD), scanning electron microscopy (SEM), electron dispersive X-ray spectroscopy (EDX), X-ray Diffraction (XRD), Brunauer-Emmett-Teller (BET), vibrating sample magnetometer (VSM), and Fourier transform infrared spectroscopy (FT-IR). The catalyst has a specific surface area of 18.54 m2/g and high basicity of 3,637.20 µmol/g. The catalytic performance shows that the optimum reaction conditions are 6 wt% catalyst loading, 12:1 methanol to oil molar ratio with the reaction time of 3 h at 60 °C to produce 90.5% biodiesel yield. The catalyst exhibits good catalytic activity and magnetism, indicating that the CLW can be a potential raw material for catalyst preparation and application in the biodiesel industry. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
Synthesis of Magnetic Catalyst Derived from Oil Palm Empty Fruit Bunch for Esterification of Oleic Acid: An Optimization Study Shamala Gowri Krishnan; Fei-Ling Pua; Ee-Sann Tan
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 1 Year 2022 (March 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.1.12392.65-77

Abstract

Biomass, renewable, abundantly available and a good source of energy. The conversion of biomass waste into valuable products has received wide attention. In this study, an empty fruit bunch (oil palm EFB) supported magnetic acid catalyst for esterification reaction was successfully prepared via the one-step impregnation process. The new magnetic catalyst achieved a higher surface area of 188.87 m2/g with a total acidity of 2.4 mmol/g and identified iron oxide as g-Fe2O3. The magnetization value of 24.97 emu/g demonstrated that the superparamagnetic catalyst could be easily recovered and separated after the reaction using an external magnet. The catalytic performance of oil palm EFB supported magnetic acid catalyst was examined by esterification of oleic acid. Esterification process parameters were optimized via Response Surface Methodology (RSM) optimization tool with Box-Behnken design (BBD). The following optimum parameters were determined: an amount of 9 wt% catalyst, molar ratio of methanol to oleic acid of 12:1, reaction time of 2 h and reaction temperature of 60 °C with a maximum conversion of 94.91% was achieved. The catalyst can be recycled up to five cycles with minimal loss in its activity. The oil palm waste-based magnetic acid catalyst indicates its potential replacement to the existing solid catalysts that are economical and environmentally friendly for the esterification process in biofuel applications. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
Synthesis of Carbide Lime Waste Derived Base Catalyst (KF/CLW-Fe3O4) for Methyl Ester Production: An Optimization Study Hong Hua Lim; Fei Ling Pua; R. Othman; Yun Hin Taufiq-Yap; Shamala Gowri Krishnan
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 1 Year 2022 (March 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.1.12348.127-134

Abstract

In this paper, solid base catalyst KF/CLW-Fe3O4 was prepared from carbide lime waste, primarily calcium hydroxide with tiny amounts of carbonate and; the catalyst was used in the optimization study on the methyl ester production. The new strong base catalyst was synthesized by chemical impregnation. This catalyst was characterized by Hammett indicator analysis, Brunauer, Emmett, and Teller (BET), scanning electron microscope (SEM), X-ray diffraction (XRD) and temperature-programmed desorption (TPD) of carbon dioxide. The catalyst was further used to catalyzed the transesterification reaction to produce methyl ester. Taguchi method was used to assess the impact of catalyst at different intervals of reaction parameters, including reaction time, methanol to oil ratio, and catalyst loading. A mixed level of orthogonal array design with L9, analysis of variance (ANOVA) and signal to noise ratio were used to determine parameters that significantly impact the palm oil transesterification reaction. High methyl ester conversion was attained, and the catalyst can be easily separated and reused. KF/CLW-Fe3O4 has great potential to be used to produce methyl ester because of its high catalytic activity and environmental friendliness. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
Co-Authors Ee-Sann Tan Fei Ling Pua Fei-Ling Pua Hong Hua Lim Hong-Hua Lim R. Othman Yun Hin Taufiq-Yap