Article Per Year (5 Year)
p-Index From 2021 - 2026
0
P-Index
This Author published in this journals
All Journal Molekul: Jurnal Ilmiah Kimia International Journal of Renewable Energy Development
Dani Permana
Indonesian Institute of Sciences
Chemical Engineering, Chemistry & Bioengineering Chemistry Control & Systems Engineering Earth & Planetary Sciences Electrical & Electronics Engineering Energy Engineering

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

 1 
The Effect of Iron Ion to the Removal of Nickel Ion From Electroplating Wastewater Using Double Chamber Electrodeposition Cell (DCEC) Reactor Djaenudin Djaenudin; Dani Permana
Molekul Vol 12, No 1 (2017)
Publisher : Universitas Jenderal Soedirman

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (715.636 KB) | DOI: 10.20884/1.jm.2017.12.1.232

Abstract

Modern society demands industrial technology advances to produce products that have high durability and long utilization lives. Materials made from ferrous metal become a solution to meet these industry needs. Ferrous metal is corrosive and it requires more care to support the performance. Electroplating or metal coating applied to iron or nickel solves this problem. In the production process, the usage of nickel is only 30%-40% and the remaining 60-70% is wasted through effluent. Nickel is a toxic heavy metal that can cause cancer. The purpose of this study is to evaluate the effect of iron concentration on nickel metal removal in electroplating wastewater using an insulated electrolytic reactor double chamber electrodeposition cell (DCEC). The result of this study shows that any ratio variation of iron concentration to nickel gives varying impacts on nickel removal efficiency, electric current efficiency, and specific energy. On the fourth variation, the iron ratio of 1.29% removed 83.1% nickel (the highest removal efficiency) at the cost of 20.687 kWh / kg specific energy. The number is extremely high for energy needs. On the other hand, the variation of iron ratio of 1.73% consumpting only 15.067 kWh / kg, the lowest specific energy needs, resulted in the lowest removal efficiency of 63.6%.
Preliminary Study of the Use of Sulphonated Polyether Ether Ketone (SPEEK) as Proton Exchange Membrane for Microbial Fuel Cell (MFC) Dani Permana; Herlian Eriska Putra; Djaenudin Djaenudin
International Journal of Renewable Energy Development Vol 7, No 1 (2018): February 2018
Publisher : Center of Biomass & Renewable Energy, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/ijred.7.1.7-12

Abstract

Sulfonated polyether ether ketone (SPEEK) was utilized as a proton exchange membrane (PEM) in Microbial Fuel Cell (MFC). The SPEEK performance in producing electricity had been observed in MFC using wastewater and glucose as substrates. The MFC with catering and tofu wastewater produced maximum power density about 0.31 mW/m2 and 0.03 mW/m2, respectively, lower that of MFC with tapioca average power density of 39.4 W/m2 over 48 h. The power density boosted because of the presence of Saccharomyces cerevisiae as inoculum. The study using of S. cerevisiae and Acetobacter acetii, separately, were also conducted in with glucose as substrate. The MFC produced an average power densities were 7.3 and 6.4 mW/m2 for S. cerevisiae and A. acetii, respectively. The results of this study indicated that SPEEK membrane has the potential usage in MFCs and can substitute the commercial membrane, Nafion.Article History: Received: Juni 14th 2017; Received: Sept 25th 2017; Accepted: December 16th 2017; Available onlineHow to Cite This Article: Putra, H.E., Permana, D and Djaenudin, D. (2018) Preliminary Study of the Use of Sulfonated Polyether Ether Ketone (SPEEK) as Proton Exchange Membrane for Microbial Fuel Cell (MFC). International Journal of Renewable Energy Development, 7(1), 7-12.https://doi.org/10.14710/ijred.7.1.7-12
Co-Authors Djaenudin Djaenudin Herlian Eriska Putra