<![CDATA[Lifting machines are used to move cargo at a location or area, department, factory, construction site, storage and unloading area. In principle, the working movement of the lifting machine is to raise and lower the load. Some lifting machines can also move horizontally, rotate, move vertically, and so on. For example, cranes can lift loads, shift, hold them up when needed and carry as specified. The formulation of the problem is to find out what is the lifting speed, power consumption and performance of the Overhead Crane with Part Botomo load at PT. PARAMOUNT BED INDONESIA. the research method uses engineering research methods and theoretical research. The purpose of this study was to determine the lifting speed, power consumption and performance generated when lifting Botomo Parts using the Overhead Crane machine at PT. PBI. In this study using 2 different rpm variations, the first uses 1000 rpm which is taken from the average value, namely the lifting speed is 6.81 m/min and the power consumption is 9.14 kW, the second uses 1,200 rpm which is taken from the average value. namely the lifting speed of 5.32 m/min and the power consumption of 6.86 kW, then this value was compared with the value of the lifting speed and power consumption in the Overhead Crane specification at PT. PBI, namely the lifting speed of 5.04 m/min and power consumption is 5.3 kW, from the results of the comparison, the performance value of the Overhead Crane engine at PT. PBI is 70%.]]>
