S. Ismail
School of Chemical Engineering, University Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia, Tel : +604-599 6458; Fax : +604-594 1013

Published : 1 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 1 Documents
Search

A New Approach of Thin Coated Adsorbent Layer for Batch Adsorption Using Basic Dye S.F. Azha; A.L. Ahmad; S. Ismail
ASEAN Journal of Chemical Engineering Vol 15, No 1 (2015)
Publisher : Department of Chemical Engineering, Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (998.912 KB) | DOI: 10.22146/ajche.49689

Abstract

Clay based adsorbent which formulated to acts as thin coated adsorbent layer (TCAL) is a new approach for adsorption of coloured wastewater. In this study, TCAL has been evaluated for the removal of methylene blue dye as an adsorbate from aqueous solution. It was prepared by combination formula of commonly known clay based adsorbent, a binder as well as solvent. This paper focused on evaluation of TCAL in terms of performance including effects of different types of binder used and ratio of adsorbent to binder. The study effect on ratio was targeted for its coating strength, contact time as well as percentage dye removal. The experimental data reported that the water based binder was the most suitable binder to be used in TCAL in terms of adsorption performance and gave strength to the coating adsorbent itself. The optimum ratio of adsorbent to binder is 0.3/2.5 weight mass. The percentage removal test for 100 mg/L concentration of Methylene Blue in batch adsorption of adsorbent coating layer was found to achieve 100 % removal within less than 3 hours. Elemental analysis and morphological structure were also determined. The finding revealed the potential of TCAL as an effective adsorbent for undertaken adsorption process on basic dye.