Claim Missing Document
Check
Articles

Found 5 Documents
Search
Journal : Jurnal Ilmiah Universitas Batanghari Jambi

Penyisihan Total Suspended Solid dan Minyak Lemak pada Air Limbah Rumah Makan Menggunakan Grease Trap dan Filter Biochar Tatal Karet Hasan, Hadrah; Riyanti, Anggrika; Marhadi, Marhadi; Putri, Ni’mah Khalifah; Jannah, Iptahul
Jurnal Ilmiah Universitas Batanghari Jambi Vol 25, No 1 (2025): Februari
Publisher : Universitas Batanghari Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33087/jiubj.v25i1.6048

Abstract

The aim of this research was to determine the removal of Total Suspended Solids and fatty oils using the grease trap and filtration methods. Based on the results of experiments that have been carried out, the removal efficiency of Total Suspended Solid at various residence times reached 99.09% (12 hours), 97.89% (24 hours), 98.65% (36 hours), 98.89% (48 hours), 99.18% (60 hours), and 99.3% (72 hours). Fatty oil removal over a period of 12 to 72 hours reached 99.99%. The use of grease traps and filters with biochar rubber and sand media shows that this treatment has proven effective in reducing levels of Total Suspended Solids and fatty oils to meet domestic wastewater quality standards.
Pengolahan Limbah Cair Industri Kayu Menggunakan Metode Destilasi (Studi Kasus Industri Kayu PT. X Provinsi Jambi) Hasan, Hadrah; Riyanti, Anggrika; Guntoro, Boby Dwi
Jurnal Ilmiah Universitas Batanghari Jambi Vol 25, No 2 (2025): Juli
Publisher : Universitas Batanghari Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33087/jiubj.v25i2.6256

Abstract

This study aims to determine the effectiveness of B3 wastewater treatment using the steam distillation method applied by the wood industry of PT X Jambi Province. Observations were made during activities in the September-November 2024 period. The parameters observed include TSS, BOD5, COD, phenol, total ammonia, and pH. The WWTP consists of several main components: initial collection basin, distillation basin, condenser, distillate collection basin, reuse basin, and indicator basin. The water used in the process of washing and maintenance of the glue spreader machine is partly wastewater that has been processed through the WWTP (reuse) with a daily average of 1.408 m3 / day. The analysis results show that all parameters are below the maximum limit of quality standards according to Permen LH No. 5 of 2014. The distillation method is proven to be effective in reducing contaminant levels and producing water that is suitable for reuse in industrial processes.
Analisis Jejak Karbon Aktivitas Pendidikan Universitas Batanghari pada Masa Pandemi Covid-19 Herawati, Peppy; Riyanti, Anggrika; Wiguna, Reiva; Ilham, M.
Jurnal Ilmiah Universitas Batanghari Jambi Vol 25, No 1 (2025): Februari
Publisher : Universitas Batanghari Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33087/jiubj.v25i1.6071

Abstract

This research aims to measure the amount of carbon footprint resulting from activities at Batanghari University during the Covid-19 pandemic. The analytical method used is carbon footprint calculation based on the GHG Protocol (The Greenhouse Gas Protocol) and guidelines from the International Panel on Climate Change. The research results show that the total carbon footprint of Batanghari University campus activities in the period June – November 2021 reached 399,843 tons.CO2-eq. This calculation was carried out in 3 (three) main areas, namely first, emissions from the use of official vehicles amounted to 0.0882 tons.CO2-eq and the use of LPG in the kitchen amounted to 0.107 tons.CO2-eq. Second, emissions from electricity use are 118,774 tons.CO2-eq/kWh, and paper use is 0.563 tons.CO2-eq. The three emissions from transportation activities amounted to 273,576 tons.CO2-eq, waste disposal amounted to 4.71 tons.CO2-eq, and LPG use in canteens amounted to 0.859 tons.CO2-eq.
Analisis Laju Emisi Gas Buang Karbon Monoksida (Qco) Pada Udara Ambient di Jalan Lintas Mendalo Darat Kabupaten Muaro Jambi Herawati, Peppy; Riyanti, Anggrika; Adriansyah, Endi; Prasasti, Dinda; Suzana, Asih
Jurnal Ilmiah Universitas Batanghari Jambi Vol 24, No 2 (2024): Juli
Publisher : Universitas Batanghari Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33087/jiubj.v24i2.5317

Abstract

Carbon monoxide (CO) is a compound that has no smell, taste or color. The compound carbon monoxide (CO) originates from vehicle exhaust emissions from incomplete engine combustion, when exposed it will have an impact on disrupting the path of oxygen binding to hemoglobin in the blood. The Mendalo Darat road is one of the busiest roads in Jambi Province, so it is prone to traffic jams due ti the dense mobilization of motorized vehicles. This can result in a decrease in ambient air quality due to the concentration of carbon monoxide (CO) compounds. This study aims to determine the quality of ambient air in the parameters of carbon monoxide (CO) on the Mendalo Darat highway and the resulting emission rate. Based on the research results for 3 days, namely Sunday (Weekend), Monday, and Tuesday (Weekday), it shows that the highest density is on Tuesday morning which is 17,994 units. Meanwhile, the lowest vehicle volume was on Sunday afternoon point III with a vehicle volume of 6.576 units. The results showed that the highest carbon monoxide (Qco) emission rate on Sunday was at point I in the afternoon of 97.114 µg/m.s, at point II in the afternoon that was 52.665 µg/m.s, and point III in the afternoon wa 52.644 µg/m.s. on Monday, the highest emission rate of carbon monoxide (Qco) was at point I in the afternoon of 106.830 µg/m.s. followed by point II in the afternoon, which was 86.795 µg/m.s on Tuesday, and point III, which was 86.749 µg/m.s. on Tuesday, point I with the largest carbon monoxide (Qco) emission rate was 114.290 tn the morning, followed by point I, which was 109.601 in the afternoon
Adsorben dari Lumpur Limbah untuk Penyisihan Kromium pada Fixed Bed Column Riyanti, Anggrika; Hadrah, Hadrah; Kasman, Monik; Marhadi, Marhadi; Samuel, Samuel
Jurnal Ilmiah Universitas Batanghari Jambi Vol 24, No 3 (2024): Oktober
Publisher : Universitas Batanghari Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33087/jiubj.v24i3.5577

Abstract

Sewage sludge is a major by-product of the wastewater biological treatment process. Wastewater Treatment Plants at Palm Oil Mills (PKS) produce a lot of sewage sludge and until now it has not been optimally utilized. This study aims to examine the potential of PKS sewage sludge as an adsorbent for the removal of kromium (Cr) by the fixed bed column method. The study will also analyze the effect of recirculation on the reduction of kromium levels. The sludge was carbonized in a furnace at 300°C for 2 hours. Synthetic kromium wastewater was made at three concentrations of 2000 ppm, 3000 ppm, and 4000 ppm. The sludge adsorbent used was 100 grams which was filled into the fix bed column. Recirculation of kromium wastewater was performed 3 times. Adsorption isotherms were analyzed using Langmuir and Freundlich models. The results showed that the best removal without recirculation occurred at a kromium concentration of 3000 ppm with a removal efficiency of 48.07%. Furthermore, recirculation was carried out 3 times and resulted in varying removal values at the 1st, 2nd, and 3rd recirculation of 37.9%, 40.06% and 35.4%. The highest removal occurred in the second recirculation. The addition of recirculation led to a decrease in the sorption of chrome as the adsorbent had reached saturation point. This allows the release of kromium ions that have been adsorbed and causes the removal efficiency to decrease. A suitable adsorption isotherm model for sludge adsorbent is the Langmuir model, where the adsorption process occurs in a single layer and is homogeneous.