Ayu Abdul-Rahman
Department of Mathematics and Statistics, School of Quantitative Sciences, Universiti Utara Malaysia, 06010 UUM, Sintok, Kedah

Published : 4 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 4 Documents
Search

Analysis of Wake Turbulence for a Savonius Turbine for Malaysia’s Slow-Moving Current Flow Anas Abdul Rahman; Kumaran Rajendran; Ayu Abdul-Rahman; Gisrina Elin Suhri; Lakshuman Dass
International Journal of Renewable Energy Development Vol 11, No 4 (2022): November 2022
Publisher : Center of Biomass & Renewable Energy, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/ijred.2022.45985

Abstract

With Malaysia being surrounded by water bodies, tidal energy could be used for energy extraction. While several turbine designs and technologies have been used for tidal energy extraction, information on the use of vertical-axis tidal turbines (VATTs) for shallow-water applications is scarce. However, implementing horizontal-axis tidal turbines (HATTs) is not feasible due to Malaysian ocean depths. Hence, examining the wake-flow characteristics of VATTs in a shallow water-working environment in Malaysia is essential. The wake turbulence of the Savonius turbine model was compared with that of a hypothetical ‘actuator' cylinder, a VATT representation. Subsequently, the wake turbulences of a Savonius turbine model in static and dynamic simulations were compared to understand the flow distinction. Compared with that exhibited by the hypothetical actuator cylinder of 2.5 m, the hypothetical actuator cylinder of 5 m exhibits greater velocity deceleration. Additionally, the modelled Savonius turbine exhibits significantly more deceleration than that exhibited by the hypothetical actuator cylinder. Finally, the analysis of the static model of the Savonius turbine shows deceleration that is greater than that of the dynamic model.
Statistical Analysis on The Near-Wake Region of RANS Turbulence Closure Models for Vertical Axis Tidal Turbine Muhammad Wafiuddin Abd Rahim; Anas Abdul Rahman; Ayu Abdul-Rahman; Muhammad Izham Ismail; Mohd Shukry Abdul Majid; Nasrul Amri Mohd Amin
International Journal of Renewable Energy Development Vol 12, No 1 (2023): January 2023
Publisher : Center of Biomass & Renewable Energy, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/ijred.2023.48380

Abstract

The flow field in the near wake region (up to six turbine diameters downstream) of a tidal current turbine is strongly driven by the combined wake of the device support structure and the rotor. Accurate characterisation of the near-wake region is important, but it is dominated by highly turbulent, slow-moving fluid. At present, limited number of research has been undertaken into the characterisation of the near-wake region for a Vertical Axis Tidal Turbine (VATT) device using the Reynolds Averaged Navier Stokes (RANS) model in the shallow water environment of Malaysia. This paper presents a comprehensive statistical analysis using the Mean Absolute Error (MEA), Mean Squared Error (MSE) and Root Mean Squared Error (RMSE) on the near-wake region for shallow water application by comparing numerical solutions (i.e., different types of RANS turbulence models using Ansys Fluent) with published experimental data. Seven RANS turbulence models with a single VATT, represented by using a cylindrical object, were employed in the preliminary study. The statistical analysis performed in this study is essential in exploring and giving a detailed understanding on the most suitable RANS turbulence model to be improved, specifically on its near-wake region. In this study, the near wake region is defined as D ≤ 6, where D is the device diameter. The analysis shows that the RANS numerical solutions are unable to accurately replicate the near-wake region based on large statistical errors computed. The average RMSE of near-wake region at z/D = [2, 3, 4, 6] are 0.5864, 0.4127, 0.4344 and 0.3577 while the average RMSE at far-wake region z/D = [8, 12] are 0.2269 and 0.1590, where z is the distance from the cylindrical object along the length of domain. The statistical error values are found to decrease with increasing downstream distance from a cylindrical object. Notably, the standard k–ε and realizable k–ε models are the two best turbulent models representing the near-wake region in RANS modelling, yielding the lowest statistical errors (RMSE at z/D = [2, 3, 4, 6] are 0.5666, 0.4020, 0.4113 and 0.3455) among the tested parameters
Statistical Analysis on The Near-Wake Region of RANS Turbulence Closure Models for Vertical Axis Tidal Turbine Muhammad Wafiuddin Abd Rahim; Anas Abdul Rahman; Ayu Abdul-Rahman; Muhammad Izham Ismail; Mohd Shukry Abdul Majid; Nasrul Amri Mohd Amin
International Journal of Renewable Energy Development Vol 12, No 1 (2023): January 2023
Publisher : Center of Biomass & Renewable Energy, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/ijred.2023.48380

Abstract

The flow field in the near wake region (up to six turbine diameters downstream) of a tidal current turbine is strongly driven by the combined wake of the device support structure and the rotor. Accurate characterisation of the near-wake region is important, but it is dominated by highly turbulent, slow-moving fluid. At present, limited number of research has been undertaken into the characterisation of the near-wake region for a Vertical Axis Tidal Turbine (VATT) device using the Reynolds Averaged Navier Stokes (RANS) model in the shallow water environment of Malaysia. This paper presents a comprehensive statistical analysis using the Mean Absolute Error (MEA), Mean Squared Error (MSE) and Root Mean Squared Error (RMSE) on the near-wake region for shallow water application by comparing numerical solutions (i.e., different types of RANS turbulence models using Ansys Fluent) with published experimental data. Seven RANS turbulence models with a single VATT, represented by using a cylindrical object, were employed in the preliminary study. The statistical analysis performed in this study is essential in exploring and giving a detailed understanding on the most suitable RANS turbulence model to be improved, specifically on its near-wake region. In this study, the near wake region is defined as D ≤ 6, where D is the device diameter. The analysis shows that the RANS numerical solutions are unable to accurately replicate the near-wake region based on large statistical errors computed. The average RMSE of near-wake region at z/D = [2, 3, 4, 6] are 0.5864, 0.4127, 0.4344 and 0.3577 while the average RMSE at far-wake region z/D = [8, 12] are 0.2269 and 0.1590, where z is the distance from the cylindrical object along the length of domain. The statistical error values are found to decrease with increasing downstream distance from a cylindrical object. Notably, the standard k–ε and realizable k–ε models are the two best turbulent models representing the near-wake region in RANS modelling, yielding the lowest statistical errors (RMSE at z/D = [2, 3, 4, 6] are 0.5666, 0.4020, 0.4113 and 0.3455) among the tested parameters
Analysis of Wake Turbulence for a Savonius Turbine for Malaysia’s Slow-Moving Current Flow Anas Abdul Rahman; Kumaran Rajendran; Ayu Abdul-Rahman; Gisrina Elin Suhri; Lakshuman Dass
International Journal of Renewable Energy Development Vol 11, No 4 (2022): November 2022
Publisher : Center of Biomass & Renewable Energy, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/ijred.2022.45985

Abstract

With Malaysia being surrounded by water bodies, tidal energy could be used for energy extraction. While several turbine designs and technologies have been used for tidal energy extraction, information on the use of vertical-axis tidal turbines (VATTs) for shallow-water applications is scarce. However, implementing horizontal-axis tidal turbines (HATTs) is not feasible due to Malaysian ocean depths. Hence, examining the wake-flow characteristics of VATTs in a shallow water-working environment in Malaysia is essential. The wake turbulence of the Savonius turbine model was compared with that of a hypothetical ‘actuator' cylinder, a VATT representation. Subsequently, the wake turbulences of a Savonius turbine model in static and dynamic simulations were compared to understand the flow distinction. Compared with that exhibited by the hypothetical actuator cylinder of 2.5 m, the hypothetical actuator cylinder of 5 m exhibits greater velocity deceleration. Additionally, the modelled Savonius turbine exhibits significantly more deceleration than that exhibited by the hypothetical actuator cylinder. Finally, the analysis of the static model of the Savonius turbine shows deceleration that is greater than that of the dynamic model.