Claim Missing Document
Check
Articles

Found 6 Documents
Search

Perencanaan Instalasi Penerangan Jalan Umum Pada Jl. Sungai Kapih Kecamatan Sambutan Samarinda: Indonesia Rizky Aprylianto Susilo
J-ENSITEC Vol. 9 No. 02 (2023): May 2023
Publisher : Universitas Majalengka

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (412.88 KB) | DOI: 10.31949/jensitec.v9i02.3615

Abstract

The installation of public street lighting serves as a tool for road users when they are active at night and increases the safety and comfort of road users from crime or unwanted things and also complements the road that can be placed on the right / left or the middle of the road (median) as well. Planning for public street lighting on SungaiKapih road uses LED lights with a power of 60 watts with a protection index (IP) of 65 and has an efficacy of 5 lux which produces a light intensity of 605 Cd. The lamp poles used are galvanized iron poles, the type of lamp poles used is a single-arm octagonal lamp post with a height of 11 meters, installed on the right side of the road parallel to a distance of 40 meters as many as 35 poles. The source of electricity used in the planning of Jalan Sungai Kapih lighting is a source from PLN which is located around the location. The control system for planning the SungaiKapih road uses an automatic and manual system that is controlled by a photocell, contactor and selector switch. The purpose of installing this selector is so that the circuit can still be operated if the timer and photocell are damaged or not functioning and make it easier for related parties to carry out maintenance or repairs on street lights.
Perencanaan Penerangan Jalan Umum Menggunakan Pembangkit Listrik Tenaga Surya Pada Jalan Ir. H. Nusyirwan Ismail, M.Si Di Kecamatan Samarinda Ulu, Kota Samarinda: Indonesia Rizky Aprylianto Susilo
J-ENSITEC Vol. 9 No. 02 (2023): May 2023
Publisher : Universitas Majalengka

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (355.646 KB) | DOI: 10.31949/jensitec.v9i02.3691

Abstract

This study discusses the Planning of Public Street Lighting Using a Solar Power Plant (PLTS) on Jalan Ir.H.Nusyirwan Ismail, M.Si in Samarinda District, Ulu Samarinda City. Jalan Nusyirwan Ismail has a road length of 5600 meters and a road width of 7 meters. Based on the road layout and calculations, the total number of poles used is 141 poles with a total of 282 light points used. In planning public street lights using solar power on the Nusyirwan Ismail street, the PJUTS used is the All In One PJUTS type, which has advantages in terms of economy, security, and better reliability than using conventional PJUTS.    
PENGARUH FREKUENSI TERHADAP EFFISIENSI DAN REGULASI TEGANGAN TRANSFORMATOR Lucianus Handri Gunanto; Rizky Aprylianto Susilo; Subir Subir; Arbain Arbain; Qomaruddin Qomaruddin; Yohanes Suban Peli; Rocky Yefrenes Dillak
Jurnal Ilmiah Flash Vol 9 No 1 (2023)
Publisher : P3M- Politeknik Negeri Kupang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32511/flash.v9i1.1074

Abstract

Transformator didesain untuk bekerja pada frekuensi kerja tertentu. Penentuan frekuensi kerja transformator berkaitan dengan penentuan tegangan kerja, jumlah lilitan pada belitan transformator dan ukuran inti. Effisiensi dan regulasi tegangan merupakan watak transformator yang perlu diketahui dalam kaitannya dengan penerapan transformator dalam sistem tenaga listrik. Penelitian dilakukan dengan mengoperasikan transformator 50 Hz pada beberapa frekuensi tertentu yaitu 30 Hz, 40 Hz, 50 Hz, 60 Hz, 70 Hz, 80 Hz, 90 Hz dan 100 Hz. Sumber listrik yang frekuensinya dapat diatur diperoleh dengan mengatur putaran generator sinkron. Pengaturan putaran dilakukan dengan mengatur putaran motor arus searah sebagai penggerak generator. Tegangan, arus dan faktor daya disisi primer dan sekunder transformator diukur dan digunakan untuk menghitung effisiensi dan regulasi tegangan. Effisiensi dan regulasi tegangan untuk masing-masing frekuensi diperbandingkan. Data hasil penelitian memperlihatkan bahwa frekuensi mempengaruhi effisiensi transformator. Effisiensi transformator menjadi lebih rendah apabila transformator dioperasikan bukan pada frekuensi kerjanya. Pengaruh frekuensi terhadap effisiensi transformator terlihat jelas apabila transformator berbeban ringan. Regulasi tegangan transformator dipengaruhi frekuensi. Regulasi tegangan transformator menjadi lebih besar apabila transformator dioperasikan bukan pada frekuensi kerjanya.
SOLAR TRACKER BERBASIS ARDUINO UNO Subir Subir; Rizky Aprylianto Susilo; Lucianus Handri Gunanto; M Hafif Rahmatullah; Anang Nur Rahman; Yohanes Suban Peli; Rocky Yefrenes Dillak
Jurnal Ilmiah Flash Vol 9 No 1 (2023)
Publisher : P3M- Politeknik Negeri Kupang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32511/flash.v9i1.1075

Abstract

Energi matahari dapat dimanfaatkan dengan cara merangkai suatu alat yang dapat digunakan untuk mengubah energi matahari menjadi energi listrik. Alat yang dapat digunakan adalah Panel Surya. Teknologi dengan menggunakan Panel Surya telah lama dikenal oleh manusia. Permasalahan yang ada sekarang ini adalah Panel Surya yang terpasang kebanyakan masih bersifat statis. Hal ini menyebabkan penerimaan energi matahari tidak optimal. Oleh karena itu, perlu dibuat sistem yang membuat Panel Surya selalu mengikuti arah matahari. Perangkat solar tracker bertujuan untuk bisa mengikuti arah gerak matahari dengan menampilkan status baterai pada LCD, dengan kontroller berupa arduino uno dan perangkat tambahan sebagai input berupa 2 sensor LDR dan 1 buah output berupa motor servo sebagai penggerak panel surya.
Evaluation of Electrical Harmonics in Building Installations Rizky Aprylianto Susilo; Fransiskus Sandi Tolanda; Arif Hidayat; Patrik Handriano; Vita Amalia; Besse Ita Basari
Emitor: Jurnal Teknik Elektro Vol 24, No 2: July 2024
Publisher : Universitas Muhammadiyah Surakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23917/emitor.v24i2.2590

Abstract

This study aims to determine the level of harmonics, and conduct harmonic analysis on the electrical system in the new Building of the Information Technology Department of Samarinda State Polytechnic. Harmonics are electric waves that have frequencies with multiples of the base frequency of the power source (50 Hz in Indonesia). Harmonics can arise due to the use of electronic equipment that has non-linear load properties. This is becoming a major problem for power quality issues and harmonic analysis is required to scrutinize in component modeling to minimize or eliminate these harmonic disturbances. Based on research that the harmonic content in the new building of the Information Technology Department of Samarinda State Polytechnic has not met the standards. In this case, the power quality in such buildings exceeds the specified standards. The method used is the design of passive filter simulation in distribution transformers using ETAP  software. The result of this study is a decrease in harmonic currents after installing a passive filter with an initial THDi value in phase S of 59.84% for IHDi values in the 5th order of 57.25% the value does not meet IEEE 519-2014 standards, the use of single-tuned passive filters can reduce the THDi content in phase S to 10.94% and the 5th order phase S down to 10.46 already meets IEEE 519 – 2014 standards, namely THDi 15% and IHDi in the 5th order 12% with SCRatio between 100-1000 A.
Rancang Bangun Rele Diferensial Berbasis Arduino Muhammad Ismail Ibrahim; Rahmad Adi Wijaya; Rizky Aprylianto Susilo; Prihadi Murdiyat
PoliGrid Vol. 5 No. 1 (2024): Juni 2024
Publisher : Jurusan Teknik Elektro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.46964/poligrid.v5i1.41

Abstract

Rele diferensial adalah sebuah alat proteksi yang bekerja berdasarkan hukum Kirchoff arus. Hal ini dilakukan dengan cara membandingkan jumlah vektor arus yang masuk dan keluar dari rele. Jika jumlah antara vektor-vektor arus tersebut tidak sama dengan nol, maka rele akan bekerja. Penelitian ini bertujuan untuk merancang purwarupa proteksi kelistrikan menggunakan rele diferensial arus dengan metode arus bias yang berbasis mikrokontroler Arduino Uno. Rele ini dirancang untuk bekerja pada sistem satu fase. Nilai arus yang terdeteksi oleh sensor PZEM-004T diproses oleh mikrokontroler Arduino Uno untuk menentukan apakah terjadi gangguan atau masih dalam keadaan normal. Dengan demikian, dapat dikatakan bahwa Arduino Uno akan mengontrol kerja rele. Karakteristik tripping ANSI 87T digunakan sebagai acuan dalam kerja rele ini, dengan slope yang mengacu pada SIPROTEC 7UT6. Slope ini diatur guna mengantisipasi tripping pada diferensial arus yang masih dapat dimaklumi. Hasil dari penelitian ini adalah rele dapat memutuskan saluran rangkaian, bila arus diferensial dan arus restrain yang terdeteksi oleh Arduino Uno diluar dari persentase slope yang telah diatur. Selain itu, terdapat perbedaan waktu kerja rele yang didapatkan dari simulasi software ETAP dengan waktu kerja rele sebesar 19%.