Claim Missing Document
Check
Articles

Found 4 Documents
Search

Implementation analysis of vacuum area gripping system in pick and place machinery in wooden door company Julfrianto Julfrianto; Edilla
JTTM : Jurnal Terapan Teknik Mesin Vol 4 No 2 (2023): JTTM: Jurnal Terapan Teknik Mesin
Publisher : Teknik Mesin - Sekolah Tinggi Teknologi Muhammadiyah Cileungsi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37373/jttm.v4i2.574

Abstract

Companies must grow in order to boost efficiency and production quality due to competition in the wood industry, particularly in the production of increasingly hard wooden doors. The issue that businesses face frequently is the occurrence of product flaws during the manufacture of wooden doors. A method for lifting, positioning, and moving door goods has been created by PT XYZ, one of the export-quality wooden door firms. By reducing product flaws, this study hopes to raise the quality of wooden doors. The pick and place machine's grasping system is the primary cause of the high prevalence of impairment. There are specific flaws in the door-gripping mechanism that increase the likelihood of product failures from falling and workplace accidents. After reworking the vacuum area gripping system, which uses suction technology, one of the Schmalz brands manufactured in Germany is outfitted with an external suction motor as a source of suction energy. The tool can lift loads up to 50 kg in accordance with specifications at a consistent speed, according to development results
Rancang Bangun Mesin Pengupas Buah Pinang Siahaan, Derryl Gabriello; Tianur; Edilla; Hendriko
ARMATUR : Artikel Teknik Mesin & Manufaktur Vol. 5 No. 1 (2024): Jurnal Armatur
Publisher : Universitas Muhammadiyah Metro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24127/armatur.v5i1.4276

Abstract

Areca nut is classified as a grain that is widely distributed in several areas, especially Riau, especially in the Indragiri Hilir area as the largest betel nut producer in Indonesia. Peeling betel nut skin using a machine is easier and faster than manually peeling betel nut, based on that I am very interested in making a "Design of Areca Peeler". Furthermore, the betel nut peeler machine is planned to be able to accommodate areca nut with a capacity of 2.5 kg with a motor power of 3/4 HP. Based on the problems above, it is necessary to design a semi-mechanical dried betel nut peeler that can still be operated using human power. This betel nut peeler machine uses a blade that is placed horizontally and a slam net as a tool for stripping the betel nut method, which is inserted from the top hooper and then into the slamming net, then peeled by the slashing eye and the peeled betel nut comes out of the net that has been adjusted to the size of the betel nut. areca nut size and then down to the sloping part of the thin plate to separate the fruit and betel rind. In 3 experiments carried out from each load given the maximum dry betel nut stripping with a motor speed of 2793 RPM.
Mesin Pencetak Pilus Menggunakan Screw Pendorong Yunus, Muhammad Afdhal Yunus; Edilla; Akhyan, Amnur
Jurnal ELEMENTER (Elektro dan Mesin Terapan) Vol. 9 No. 2 (2023): Jurnal Elektro dan Mesin Terapan (ELEMENTER)
Publisher : Politeknik Caltex Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35143/elementer.v9i2.6102

Abstract

Pilus is one kind of fried food and the shape like cylinder with variety length of cuts. Pilus makes by wheat flour, eggs, salt, and water. In general, production of pilus still manually use human power to make and cut pilus. Therefore, this pilus machine was created to make it easier and faster for human to create pilus. This pilus machine use a 1-phase AC motor to spin screw press and DC motor used to spin the cutter blade. ATMega8535 functionate as a microcontroller to control the speed and duration of motor. The Screw press is specially design, so it can press the dough out with two different sides. This Pilus Machine has capacity to produce pilus average 6kg / hr. The average current of ac motor needs 6,11 A. Average percentage of initial dough result with pilus result is 90.8%. This pilus machine can produced pilus with a length of 1cm, 2cm, dan 3cm.
Sistem Monitoring Nutrisi dan PH Air pada Tanaman Hidroponik Berbasis Internet of Things (IoT) Rivana, Rivana Risqi; Made, Made Rahmawaty; Edilla; Jajang Jaenudin
Jurnal Elektronika dan Otomasi Industri Vol. 10 No. 3 (2023): Jurnal Elkolind Vol. 10, No. 3, 2023 (September 2023)
Publisher : Program Studi Teknik Elektronika Politeknik Negeri Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33795/elkolind.v10i3.3579

Abstract

Hydroponics is a soilless cultivation method that relies on water and the fulfillment of plant nutritional needs. Nutrient provision is usually done manually, which can be time-consuming. To improve efficiency, an automated system using sensors and an IoT-based application can be implemented. This system utilizes a TDS sensor, pH sensor, and NodeMCU ESP32 to monitor nutrient and pH levels in water. The values are displayed on an LCD screen and sent to the application. If the nutrient content falls below 700 ppm or the pH falls below 5 or above 8, indicating a nutrient deficiency, the nutrient pump can be remotely activated through the application. The pump stops when the nutrient level reaches 1000 ppm or the pH reaches 8. The system provides TDS and pH readings, which have an average error of 3.16% and 2.87%, respectively. This automated system can be used to reading TDS and pH values to assist in providing nutrients to hydroponic plants.