Garuda - Garba Rujukan Digital

Studi Perencanaan Mitigasi Bencana Tsunami di Daerah Wisata Pantai Tablolong Nahak, Priska Gardeni; Djunaedi, Djunaedi; Wonlele, Tedi
Potensi : Jurnal Sipil Politeknik Vol 19, No 2 (2017): Potensi: Jurnal Sipil Politeknik
Publisher : Politeknik Negeri Bandung

Pantai Tablolong merupakan salah pantai tujuan wisata yang terletak di Kecamatan Kupang Barat, Kabupaten Kupang. Letak Pantai Tablolong adalah di bagian ujung Barat dari Pulau Timor sehingga sangat rentan terhadap bahaya Tsunami. Penelitian ini menggunakan metode deskripsi dengan melakukan observasi dan kajian secara langsung di lapangan terhadap berbagai kondisi guna mengetahui seberapa besar dampak dan kerusakan yang mungkin terjadi. Penelitian ini bertujuan untuk: a) Menghitung waktu yang diperlukan oleh gelombang tsunami dari pusat patahannya ke Pantai Tablolong. b) Memperkirakan lokasi atau jarak penempatan alat detector peringatan dini. c) Mengkaji situasi yang ada di lapangan terhadap dampak yang akan ditimbulkan oleh gelombang tsunami. Berdasarkan hasil penelitian diketahui bahwa: waktu datang gelombang tsunami adalah 13,45 menit setelah terjadi dislokasi.; Lokasi pemasangan alat detector peringatan dini, yaitu pada jarak 31,6 km dari garis pantai, sehingga memberikan waktu sekitar 12 menit bagi wisatawan untuk menyelamatkan diri.; Tinggi gelombang pada saat mencapai pantai adalah 18 m, sehingga tinggi run up gelombangnya adalah 40,7 m.; Daerah yang terkena gelombang tsunami secara langsung adalah daerah di pantai selatan pulau Timor dan pulau Semau yang memiliki elevasi di bawah 40,7 m.; Pantai wisata Tablolong hanya akan terkena dampak tsunami berupa refleksi dari gelombang tsunami terhadap pulau Semau.

Penanganan Kemacetan Lalu Lintas Yang Ditimbulkan Akibat Pergerakan Putar Balik (U-Turn) Pada Jalan Perkotaan Wadu, Amy; Dumin, Ludofikus; Nahak, Priska Gardeni
Borneo Engineering : Jurnal Teknik Sipil Volume 8 Nomor 2 Tahun 2024
Publisher : Jurusan Teknik Sipil, Fakultas Teknik, Universitas Borneo Tarakan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35334/be.v8i2.5290

The massive increase in the number of vehicles has placed a huge burden on urban transport infrastructure. This has created an urgent need for effective strategies to address traffic congestion. In Kupang City, U-turn facilities in the median of major roads such as Piet A. Tallo Street, have become a cause of congestion due to the delays that occur when vehicles make a U-turn. Approaching vehicles are often forced to slow down to allow the U-turning vehicles to merge. In an effort to respond to the growing demands of traffic flow, this study aims to investigate the impact of U-turn facilities on road medians and provide recommendations that can improve the efficiency and smoothness of traffic on urban roads. Using VISSIM software, the simulation of the planned improvement scenario of closing U1, U2 and U3 and diverting them to U4 and improving the geometry of U4 with outer widening was carried out. The results showed that the delay only reached 15.46 seconds/vehicle with level of service C from the previous existing conditions which reached 65.15 seconds/vehicle with level of service F

BUDIDAYA SHELL BACKDOOR DI PANTAI BOLOK KUPANG - NUSA TENGGARA TIMUR Nahak, Priska Gardeni; Trisnoyuwono, Diarto
JUTEKS : Jurnal Teknik Sipil Vol 1 No 2 (2016): JUTEKS JURNAL TEKNIK SIPILJUTEKS (Jurnal Teknik Sipil)
Publisher : P3M- Politeknik Negeri Kupang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32511/juteks.v1i2.116

NTT Province as one of the provinces in Indonesia has many islands, with the main livelihood of the people were farming, gardening and seaweed farmers. One of the flagship products of seafood NTT was seaweed. Kupang district is one of the producers of seaweed in the province, but the availability of area for those matter until now not able to meet the maximum target of dry seaweed. Additionally dried seaweed produced has poor quality because it still contains a lot of impurities, thus affecting the selling price, which would certainly have an impact on the income and welfare of the farmers. It is because the technique that applied to both the cultivation technique and drying techniques were still very traditional. One of the technologies offered to overcome those problems was 'Dryer Box Technology'. This technology were expected especially to minimize the amount of seaweed ready for harvest were always broken and lost in the rainy season, due to lack of seaweed dryers facilities. In addition by these technology were also expected to get more cleaner dried seaweed because it is not contaminated with dirt when drying, so as to improve the quality of the dried seaweed. This quality improvement, also will increase the selling price of which would increase the income and welfare of farmers seaweed, as well as increasing the amount of seaweed production in NTT Province. The dryer box technology has a dimension 0.8 m lenght; 0.66 m width; and 1.5 m height. so that for once the drying process, 50 kg of wet grass only requires about 0.53 m² of area, while using traditional drying methods requires 10m² ± s / d 15 m² of area depending on the number of wet grass. Besides shorter drying time is for 50 kg of wet grass, it takes only about ± 0.75 hours. Whereas with traditional systems, drying time takes an average of 3-4 days. This will increase the productivity of dry seaweed, which can increase the production quantity of dried seaweed ready though in NTT Province.

BUDIDAYA SHELL BACKDOOR DI PANTAI BOLOK KUPANG - NUSA TENGGARA TIMUR Nahak, Priska Gardeni; Trisnoyuwono, Diarto
JUTEKS : Jurnal Teknik Sipil Vol 1 No 2 (2016): JUTEKS JURNAL TEKNIK SIPILJUTEKS (Jurnal Teknik Sipil)
Publisher : P3M- Politeknik Negeri Kupang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32511/juteks.v1i2.116

NTT Province as one of the provinces in Indonesia has many islands, with the main livelihood of the people were farming, gardening and seaweed farmers. One of the flagship products of seafood NTT was seaweed. Kupang district is one of the producers of seaweed in the province, but the availability of area for those matter until now not able to meet the maximum target of dry seaweed. Additionally dried seaweed produced has poor quality because it still contains a lot of impurities, thus affecting the selling price, which would certainly have an impact on the income and welfare of the farmers. It is because the technique that applied to both the cultivation technique and drying techniques were still very traditional. One of the technologies offered to overcome those problems was 'Dryer Box Technology'. This technology were expected especially to minimize the amount of seaweed ready for harvest were always broken and lost in the rainy season, due to lack of seaweed dryers facilities. In addition by these technology were also expected to get more cleaner dried seaweed because it is not contaminated with dirt when drying, so as to improve the quality of the dried seaweed. This quality improvement, also will increase the selling price of which would increase the income and welfare of farmers seaweed, as well as increasing the amount of seaweed production in NTT Province. The dryer box technology has a dimension 0.8 m lenght; 0.66 m width; and 1.5 m height. so that for once the drying process, 50 kg of wet grass only requires about 0.53 m² of area, while using traditional drying methods requires 10m² ± s / d 15 m² of area depending on the number of wet grass. Besides shorter drying time is for 50 kg of wet grass, it takes only about ± 0.75 hours. Whereas with traditional systems, drying time takes an average of 3-4 days. This will increase the productivity of dry seaweed, which can increase the production quantity of dried seaweed ready though in NTT Province.

BUDIDAYA SHELL BACKDOOR DI PANTAI BOLOK KUPANG - NUSA TENGGARA TIMUR Nahak, Priska Gardeni; Trisnoyuwono, Diarto
JUTEKS : Jurnal Teknik Sipil Vol 1 No 2 (2016): JUTEKS JURNAL TEKNIK SIPILJUTEKS (Jurnal Teknik Sipil)
Publisher : P3M- Politeknik Negeri Kupang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32511/juteks.v1i2.1337

NTT Province as one of the provinces in Indonesia has many islands, with the main livelihood of the people were farming, gardening and seaweed farmers. One of the flagship products of seafood NTT was seaweed. Kupang district is one of the producers of seaweed in the province, but the availability of area for those matter until now not able to meet the maximum target of dry seaweed. Additionally dried seaweed produced has poor quality because it still contains a lot of impurities, thus affecting the selling price, which would certainly have an impact on the income and welfare of the farmers. It is because the technique that applied to both the cultivation technique and drying techniques were still very traditional. One of the technologies offered to overcome those problems was 'Dryer Box Technology'. This technology were expected especially to minimize the amount of seaweed ready for harvest were always broken and lost in the rainy season, due to lack of seaweed dryers facilities. In addition by these technology were also expected to get more cleaner dried seaweed because it is not contaminated with dirt when drying, so as to improve the quality of the dried seaweed. This quality improvement, also will increase the selling price of which would increase the income and welfare of farmers seaweed, as well as increasing the amount of seaweed production in NTT Province. The dryer box technology has a dimension 0.8 m lenght; 0.66 m width; and 1.5 m height. so that for once the drying process, 50 kg of wet grass only requires about 0.53 m² of area, while using traditional drying methods requires 10m² ± s / d 15 m² of area depending on the number of wet grass. Besides shorter drying time is for 50 kg of wet grass, it takes only about ± 0.75 hours. Whereas with traditional systems, drying time takes an average of 3-4 days. This will increase the productivity of dry seaweed, which can increase the production quantity of dried seaweed ready though in NTT Province.

Title

Found 5 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 5 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 5 Documents
Search