Siegfried Syafier
Puslitbang Jalan dan Jembatan

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

PENGGUNAAN LWD PUSJATAN PADA JALAN TANAH UNTUK PENGECEKAN KEKUATAN TANAH (THE USE OF PUSJATAN’S LWD ON EARTH ROADS FOR CHECKING STRUCTURAL SOIL STRENGTH) Siegfried Syafier
Jurnal Jalan-Jembatan Vol 34 No 1 (2017)
Publisher : Direktorat Bina Teknik Jalan dan Jembatan

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

ABSTRAKLWD merupakan salah satu alat yang digunakan untuk mengukur kekuatan struktural dari suatu sistem perkerasan jalan terutama untuk jalan-jalan yang tanpa penutup. Alat ini cukup praktis karena membutuhkan hanya 2 orang operator dalam pengoperasiannya. Selain itu juga lebih cepat karena hasil pengukuran langsung didapat sesaat setelah pengujian dilakukan. Alat LWD ini terdiri atas beban jatuhan, pelat pembebanan, dan sensor geophone. Beban yang dijatuhkan pada ketinggian tertentu akan menghasilkan gelombang yang ditangkap oleh geophone. Dengan menggunakan prinsip-prinsip teori gelombang kemudian bisa dihitung lendutan yang dihasilkan. Data lendutan ini dengan menggunakan rumus Boussinesq kemudian akan menghasilkan modulus elastisitas yang merupakan parameter kekuatan struktural lapisan tanah. LWD Pusjatan merupakan alat LWD yang dihasilkan dari penelitian tahun anggaran 2013, 2014, dan 2015 pada Puslitbang Jalan dan Jembatan. Alat ini dipakai pada pengujian jalan tanah di Bogor dan Kuningan, dimana untuk masing-masing lokasi diambil 10 titik pengujian. Pada titik pengujian yang sama kemudian juga dilakukan pengujian DCP. Pemilihan DCP sebagai alat pembanding dengan alasan bahwa pada umumnya alat DCP inilah yang biasanya digunakan untuk mengukur kekuatan pada jalan tanah. Hasil pengujian LWD dan DCP kemudian dibandingkan satu dengan yang lainnya. Dari kedua lokasi ini terlihat bahwa perbedaan modulus elastisitas yang didapat dari kedua alat tidak berbeda jauh seperti terlihat dari hasil plotting, dimana hasil yang didapat terlihat berada disekitar garis kesamaan. Kenyataan ini membuktikan bahwa alat LWD Pusjatan bisa digunakan pada pengujian untuk mendapatkan kekuatan struktural pada jalan tanah.Kata Kunci : LWD Pusjatan, kekuatan struktural, jalan tanah, geophone, Boussinesq.ABSTRACTLWD is a equipment that is purposed to measure the structural strength of a pavement system especially unpaved roads. This equipment is quite practical as it only needs 2 people in operation. LWD is quite handy as the data is obtained directly after testing. It consists of falling weight, load plate, and geophones. When the weight falls, it generates vibration recorded by geophones. Applying the basic formulas of vibration engineering, it can then result deflection. The deflection value is used for the calculation of modulus elasticity of layer tested using Boussinesq formula. The modulus elasticity is one of the structural strength parameters. Pusjatan’s LWD is the product of Pusjatan’s research in the fiscal years of 2013, 2014 and 2015. The LWD is applied to test earth roads in Bogor and Kuningan, where in each location it is collected 10 data using LWD and DCP on the same tested points. The main reason of using DCP for comparing Pusjatan’s LWD is that the former equipment used to measure the earth road structural strength. The results in term of modulus elasticity are compared. The results show that the differences obtained of these two equipments are quite close as near as results plotted fall in the equality line. This finding comes to the conclusion that the Pusjatan’s LWD could be used for testing of structural strength of earth roads.Key words: Pusjatan’s LWD, structural strength, earth roads, geophone, Boussinesq.
LWD PUSJATAN SEBAGAI ALAT ALTERNATIF DALAM MENGEVALUASI PERKERASAN LENTUR (IRE’S LWD AS ALTERNATIVE TOOL FOR FLEXIBLE PAVEMENT TEST) Siegfried Syafier
Jurnal Jalan-Jembatan Vol 35 No 2 (2018)
Publisher : Direktorat Bina Teknik Jalan dan Jembatan

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The structural strength testing is required to evaluate an existing pavement. The common equipment used for this sort of testing is Falling Weight Deflectometer (FWD. Especially in Indonesia, the availability of FWDs is very limited except in Java island. The alternate equipment for this purpose is to use the IRE’s LWD. This type of LWD is slightly different to that of standard ones, where the IRE’s LWD does not use load cell. The load parameter depends on the height of drops which is calibrated on the laboratory. Another thing is that the IRE’s LWD has higher stress level because its load is higher than the standard ones. This study is to look for the possibility of the use of IRE’s LWD as the alternate equipment for FWD on the flexible pavement as well as to find the correlation between these equipment in terms of surface modulus. The main parameters considered in this study are the surface modulus on the load point (E0) and surface modulus in the 900 mm offset (E1). The site for this study is at IRE campus which is classified as medium to low volume flexible roads. It is found that there is a strong correlation between surface modulus obtained from FWD test and that of IRE’s LWD. This is indicated by the plotting between each modulus around the equality line as well as by their coefficient correlation. This findings assure that it is possible to use the IRE’s LWD as the alternative for FWD for evaluation flexible roads which are classified as the medium to low traffic flexible roads. Keywords: IRE’s LWD, FWD, surface modulus, flexible pavement evaluation, medium to low traffic roads.