Claim Missing Document
Check
Articles

Found 2 Documents
Search

Analisis Penurunan Suhu Air Limbah PLTU Menggunakan Cooling Water Way pada PLTU Jeneponto 2X125MW Istiawati Darwis; Muhammad Dwiyanto Agung Prakasa; Muh Sucitra Amansah
Journal of Applied Civil and Environmental Engineering Vol. 3 No. 2 (2023): Oktober
Publisher : Politeknik Negeri Ujung Pandang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31963/jacee.v3i2.4463

Abstract

PLTU merupakan prasarana yang sangat menopang kehidupan masyarakat sekarang ini. PLTU merupakan sarana yang sangat dibutuhkan tetapi juga berkonstribusi dalam pencemaran limbah utamanya air limbah panas. Sehingga sangat perlu dilakukan analisa keefektifan instalasi saluran air pendingin (cooling water way) PLTU, sesuai atau tidak dengan ketentuan yang berlaku sehingga air limbah dapat dilepas ke laut dengan suhu normal tanpa mencemari lingkungan sekitarnya. Metode yang digunakan adalah pengolahan hasil pengukuran menggunakan aplikasi civil3D dan surfer. Hasil dari penelitian menandakan bahwa instalasi saluran air pendingin (cooling water way) tidak efektif dalam menurunkan suhu air limbah PLTU Jeneponto sehingga dapat mencemari laut. Untuk meningkatkan keefektifannya perlu diadakan perlakuan terhadap air limbah untuk menurunkan suhunya serta perencanaan yang lebih baik untuk pembuatan instalasi saluran pendingin selanjutnya.
3D Finite Element Modeling of Short Precast Concrete Square Piles in Silty Soils: A Case Study in West Java, Indonesia Muhammad Dwiyanto Agung Prakasa; Muh. Sucitra Amansah; Istiawati Darwis
Jurnal Vokasi Keteknikan Vol 4 No 2 (2026): September 2026
Publisher : Pascasarjana Universitas Negeri Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59562/r8eq8j89

Abstract

Precast concrete square piles are widely used as pile foundation elements in Indonesia, particularly in silty soil conditions. In practice, there is limited laboratory test data, leading to reliance on empirical correlations derived from field soil investigation data. This study evaluates the axial behavior of a precast concrete square pile embedded in silty soil via three-dimensional (3D) finite element modeling using the Hardening Soil model, validated against static load test data. Soil stiffness and strength parameters were derived from limited laboratory test results supported with empirical correlations. The computed load-settlement curve showed good agreement with the measured field data, indicating that the empirical correlation adopted to estimate the soil stiffness (E50) from SPT-N values, expressed as E50 = 2800N, was appropriate for this case. Moreover, the pile-soil interaction behavior was investigated based on the relative shear stress distribution, plastic point distribution, and total displacement contour, revealed that the shaft resistance had reached full mobilization at the maximum test load, whereas the tip resistance remained predominantly within the elastic range and had not been fully mobilized. This finding suggests that the actual ultimate capacity of the pile may exceed the value obtained from the 200% test load. A parametric study on the interface strength reduction factor showed that lowering Rinter value leads to the reduction of the mobilized shaft friction and consequently decreased the pile capacity. The proposed empirical correlation can be used as reference to predict axial capacity of square pile in silty soil conditions.