Article Per Year (5 Year)
p-Index From 2020 - 2025
0.408
P-Index
This Author published in this journals
All Journal Infotekmesin
Akhlis Sarihidaya Laksana, Nur
Unknown Affiliation
Computer Science & IT Electrical & Electronics Engineering Mechanical Engineering

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

 1 
Rancang Bangun Rangka dan Penggerak Mesin FDM Berbasis Arduino Tipe XZ-Head Ariawan, Radhi; Akhlis Sarihidaya Laksana, Nur; Satria Jati, Unggul; Aries Permana Tarigan, Roy
Infotekmesin Vol 14 No 1 (2023): Infotekmesin: Januari, 2023
Publisher : P3M Politeknik Negeri Cilacap

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35970/infotekmesin.v14i1.1741

Abstract

FDM is an AM method that is currently being developed due to the flexibility of the object geometry that can be formed. This study aims to design the frame and drive of the XZ Head type FDM engine. Stress simulation was carried out to determine the safety factor in the frameXZ design. Lead screw parameters in the form of torque, shear stress, axial stress, and critical load were calculated to determine the torque requirement of the driving motor. The value of the linear axis of the stepper motor was calibrated to determine the dimensions of the printed output. Based on the simulation, the dynamic and static stresses on the XZ frame were 1.9 MPa and 2 MPa. The yield strength was 55 MPa with a safety factor of 28. The results of the calculation of the lead screw torque (TR) and (TL) were 18.27 N.mm and 6.60 N.mm. The calculated nominal shear stress of the screw () was 0.43 N/mm2, the axial loading stress () was -0.62 N/mm2, and the critical load (Wcr) was 9986.41 N. The difference in dimensions of the measurement results in the X and Z planes was 0.22 and 0.17 mm larger than the target dimensions of 20 mm.
Karakteristik Struktur Kristal In2Se3 Hasil Preparasi Dengan Metode Bridgman Ulikaryani, Ulikaryani; Sodikin, Jenal; Akhlis Sarihidaya Laksana, Nur; Satria Jati, Unggul; Kristiningsih, Ari
Infotekmesin Vol 14 No 1 (2023): Infotekmesin: Januari, 2023
Publisher : P3M Politeknik Negeri Cilacap

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35970/infotekmesin.v14i1.1753

Abstract

Apart from using silicon material, thin-layer solar cells can be made from various types of semiconductor materials, such as a combination of groups III and VI. In solar cell applications, these materials are usually used as n-type coatings. This study not only aimed to determine the crystal structure and the effect of annealing temperature on the crystal lattice parameters but also to determine the chemical composition and surface morphological structure of the crystals formed from the preparation. The crystal growth process was carried out using the Bridgman method with different heating patterns. The temperature in both annealing temperatures is 200oC and 250oC. The physical properties of the prepared In2Se3 crystals were characterized using XRD, SEM, and EDAX. XRD Characterization was used to determine the crystal structure, while SEM and EDAX characterization was used to determine the surface morphology and chemical composition of the crystals. The result of the XRD characterization showed that the formed In2Se3 crystals were polycrystals with a hexagonal structure. Based on the diffractogram obtained, the In2Se3 crystalline heating 1 has better quality. EDAX analysis showed that the In2Se3 crystals were composed of elements of In and Se with a mole ratio of 2:9, while the SEM characterization showed that the color of the surface morphology of the In2Se3 crystals was not homogeneous.
Co-Authors Aries Permana Tarigan, Roy Kristiningsih, Ari Radhi Ariawan Satria Jati, Unggul Sodikin, Jenal Ulikaryani, Ulikaryani