p-Index From 2020 - 2025
0.408
P-Index
This Author published in this journals
All Journal Jurnal SPEKTRUM
Claim Missing Document
Check
Articles

Found 2 Documents
Search

ANALISIS PERBANDINGAN DAYA OUTPUT LISTRIK ANTARA PENGGUNAAN TRANSMISI GEAR DAN PULLEY PADA PROTOTYPE (PLTPH) MENGGUNAKAN TURBIN TURGO Abdi Nugraha, I. M. Tata; Arta Wijaya, I.W.; Budiastra, I.N.
Jurnal SPEKTRUM Vol 10 No 4 (2023): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/SPEKTRUM.2023.v10.i04.p1

Abstract

Picohydro Power Plant is one of the environmentally friendly generators that can meet the electricity needs in the vicinity, one of which is in the Kanto Lampo Waterfall Tourism area. The planning of this PLTPH prototype is carried out to meet the lighting needs in the waterfall area. This PLTPH prototype plan uses a turgo turbine and there are two transmissions that can be used, namely, gear and pulley. This study will make a comparison between gear and pulley transmissions with the direct measurement method on the prototype and aims to determine the transmission that can get the best results on the PLTPH prototype. The ratio variations used on gears and pulleys are 4:1, 4:1.3 and 4:2. The PLTPH prototype using a turgo turbine obtained the highest results at a gear ratio of 4:1 with an output power of 48.70 Watt and the resulting torque of 0.613 Nm, while the lowest results were obtained at a pulley ratio of 4:2 with an output power of 10.83 Watt and the resulting torque is 0.147 Nm.
ANALISIS PENGARUH PENGGUNAAN DUA NOZZLE TERHADAP DAYA OUTPUT LISTRIK PADA PROTOTYPE PEMBANGKIT LISTRIK TENAGA PIKOHIDRO DENGAN MENGGUNAKAN TURBIN TURGO Yoga Pratama, I.G.; Arta Wijaya, I.W.; Budiastra, I.N.
Jurnal SPEKTRUM Vol 10 No 4 (2023): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/SPEKTRUM.2023.v10.i04.p11

Abstract

This study uses two nozzles on the PLTPH prototype with a turgo turbine because this research wants to apply the use of two nozzles in a pelton turbine. This study aims to determine the effect of using two nozzles on the output power produced by the PLTPH prototype with the direct test method on the prototype made. This two-nozzle PLTPH prototype with a turgo turbine can produce higher turbine rotation than the existing conditions. The final result is the highest rotation on the turbine using 2 nozzles where the A nozzle angle is 70° based on the x axis and the B nozzle angle is 60° based on the y axis of 752.2 rpm. In the 4:1 gear ratio transmission test, the results obtained were 504.4 rpm turbine rotation, 2114.9 rpm generator rotation, 10.99 volt voltage, 4.43 amperes current, and 48.70 watt power.