M. Mulyono
Research and Development Centre for Oil and Gas Technology "LEMIGAS"

Published : 5 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 5 Documents
Search

STUDY ON THE ENVIRONMENTAL ASPECTS OF PIT CLOSURE GUIDELINES FOR OIL AND GAS PRODUCTION ACTIVITIES M. Mulyono
Scientific Contributions Oil and Gas Vol 29 No 1 (2006)
Publisher : Testing Center for Oil and Gas LEMIGAS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29017/SCOG.29.1.1019

Abstract

Exploration, development, and production activities associated with oil and gas production projects can have a variety of impacts on the environment. A variety of wastes are produced by such activities. Apart from the wastewater that is in the form of produced water, many kinds of solid wastes are produced during exploration and production of oil and gas. These solid wastes, among others, are drilling mud and cuttings, and tank bottom oily sludge. These solid wastes are dumped temporarily in a certain place called a pit before they can be treated further. In order to minimize and possibly eliminate the environmental impacts of those solid wastes, pit construction has to be developed in such a way that release of pit contents to the environment could be prevented. In addition, pollutant loading of ground water from waste leaks, releases of hydrocarbons and hydrogen sulphide to the atmosphere are some of the factors that have also to be considered. As dumping such solid wastes in a pit is a temporary storage, pit closure management has also to be developed. Explicitly, governmental regulation concerning with environmental aspects of pit closure has not been established yet. Nevertheless, environmental management approach of pit construction and closure could be established by referring to the available regulation, namely Governmental Regulation PP. 18/1999 juncto PP. 85/1999 - hazardous waste regulation, and the related Ministerial Decree, such as Bapedal Decree No. Kep.-04/BAPEDAL/09/19995 decsribing methods of landfilling or land disposal for hazardous wastes. This approach is based on the reason that such solid wastes are also categorized as hazardous wastes. In regard to pit construction, study on pit location should include the hydrogeology pattern of the site. Furthermore, pit wall materials are parameters that also have to be considered in minimizing impacts to the surrounding. Upon closing the pit, a pit closure plans that call for the dewatering of mud and reserve pit contents before burial have to be developed to reduce the chance of the downward transport of contaminants to shallow aquifers. The grading of soils covering the pits may reduce the chances of infiltration of rainwater, which may migrate to ground water. Other consideration, for example revegetation, has also to be included. All of the above factors should be considered in pit closure and assessment guideline. In addition to the available national references, other worldwide references such as those of US-EPA guidelines deserve to be considered in studying pit management. The author has conducted a short study concerning pit closure management that has been implemented in oil and gas producing companies. Goals of the study are to review the manual guideline or standard operating procedure (SOP) of pit closure applied to the fields. The followings are report concerning with the implementation of the study.
STUDY OF HAZARDOUS WASTE TREATMENT AND MANAGEMENT FOR THE OIL AND GAS INDUSTRIES M. Mulyono; R. Desrina; Evita H. Legowo
Scientific Contributions Oil and Gas Vol 25 No 2 (2002)
Publisher : Testing Center for Oil and Gas LEMIGAS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29017/SCOG.25.2.1069

Abstract

Study of hazardous waste treatment and management for the oil and gas industries has been conducted by Lemigas Team to observe the existing guidelines and the implementation of the guidelines in hazardous waste management. The study also includes a selection of the government regulation that should be considered in the hazardous waste treatment and management for the oil and gas industries. Results of the study indicate that the oil industry does not conduct treatment processes for all hazardous wastes that are generated. Some of them, especially those of non-specific hazardous wastes are stored in a temporary storage facility and managed off site for treatment or disposal to a commercial hazardous waste facility. The off-site waste management requires the use of a document termed a manifest for tracking its transport on a "cradle-to-grave" basis. The most prominent problem faced by the oil production industries, however, is the vast generation of wastes from production operation activities such as drilling mud, oil contaminated soil, and oil tank sludge and pit sludge. All of these wastes need to be handled properly. This paper presents the results of the study describing the existing guidelines used by the oil and gas industry and its implementation as well as reviewing the government regulation related to hazardous waste management and the technologies that can be applied in mitigating the hazardous wastes generated by the oil and gas industries.
STUDY ON PIT CLOSURE GUIDELINES FOR OIL AND GAS PRODUCTION ACTIVITIES R. Desrina; Evita H. Legowo; M. Mulyono
Scientific Contributions Oil and Gas Vol 25 No 3 (2002)
Publisher : Testing Center for Oil and Gas LEMIGAS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29017/SCOG.25.3.1073

Abstract

Study on pit closure guidelines for the oil and gas industries has been conducted by Lemigas Team to observe the existing guidelines in the implementation of the guidelines in the closure program of the temporary use of pits. Goals of the study are to review the manual guideline or standard operating procedure (SOP) of pit closure applied to the petroleum fields, and compare it to the relevant government regulation. So far, governmental regulation concerning pit construction and closure has not been established yet. Nevertheless, management approach of pir construction and closure can be established by referring to the available regulation, namely PP. 18/1999- hazardous waste regulation, and the related Ministerial Decree. This approach is based on the reason that such solid wastes are also categorized as hazardous wastes. Looking at from regulation point of view, it can be said that pit management guideline established by the industry has fulfilled and matched with the available regulation such as Kep.-04/Bapedal/09/1995. Nevertheless, some criteria have to be re-evaluated and post-closure plan seem not to be included in the guidelines vet. This paper presents the results of the study describing the existing guidelines used by the oil and gas industry and its implementation as well as reviewing the government regulation related to the pit closure program.
OIL AND GREASE DETERMINATION IN PETROLEUM OPERATION WASTE WATER R. Desrina; E. Jasjfi; M. Mulyono
Scientific Contributions Oil and Gas Vol 23 No 2 (2000)
Publisher : Testing Center for Oil and Gas LEMIGAS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29017/SCOG.23.2.1083

Abstract

A regulation concerning waste water quality for oil and gas activities in Indonesia has recently been issued in the State Minister for Environment Decree No. 42/MENLH/10/1996. Waste water quality for oil and gas activities is classified in this decree according to the type of activities, namely exploration and production activities, refineries, and petroleum product storage and distribution activities. Maximum permissible concentration of oil and grease in waste water varies depending on the activities and mode of discharges. The oil and grease concentration in operation waste water that ranges from 20 ppm for the refineries to 75 ppm for off shore production have led to the variation in determination methodologies. Survey on oil and grease determination methods in Indonesia indicated that determination method ranges from gravimetric method that is unsuitable for light fraction to spectrometric method that depends on the oil standard. Moreover variation of solvent will give different result. This paper describes an overview of oil and grease determination conducted by the Indonesian oil and gas companies informing the advantages and disadvantages of each method. The possible single method that can be utilized as a standard method as well as approaches in conducting correlation program is proposed.
ANALYTICAL METHOD FOR THE IDENTIFICATION OF OIL SPILL DISPERSANT COMPOSITION M. Mulyono; R. Desrina; E. Jasjfi
Scientific Contributions Oil and Gas Vol 23 No 3 (2000)
Publisher : Testing Center for Oil and Gas LEMIGAS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29017/SCOG.23.3.1086

Abstract

Chemical dispersants are often used to disperse spilled oils, which threaten to pollute shoreline areas. In Indonesia all dispersants produced or marketed should undergo the toxicity test with regand to certain types of fish to determine the threshold limit, LC-50. The type of surface-active agent (surfactants) and the solvent used in the dispersants, which determine the dispersing quality, might be toxic to the marine species and bacteria.