Journal of Engineering and Technological Sciences
Vol. 49 No. 5 (2017)

Non-linear Isotherm Models, Cadmium Kinetics, and Biosorption Thermodynamics of Dried Biomass of Native Aphanothece sp. in a Batch System

Awalina Satya (Research Centre for Limnology,-The Indonesian Institute of Sciences (P2L-LIPI) Cibinong Science Center)
Ardiyan Harimawan (Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung)
Gadis Sri Haryani (Research Centre for Limnology,-The Indonesian Institute of Sciences (P2L-LIPI) Cibinong Science Center)
Tjandra Setiadi (Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung)



Article Info

Publish Date
30 Nov 2017

Abstract

Dried biosorbent was prepared from Aphanothece sp. cyanobacteria harvested from a photobioreactor system fed with atmospheric carbon dioxide. Cadmium-ion biosorption of the prepared biosorbent from aqueous solution was characterized by non-linear (Langmuir, Freundlich and Dubinin"“Radushkevich) isotherms, non-linear kinetics (pseudo first-order and pseudo second-order) and thermodynamic analysis. The optimum conditions were pH 8.0, 30°C, 0.1 g/L biomass, and 60 min contact time. The biosorption efficiencies exceeded 90%. The low-range data (initial Cd concentration C0 = 1.09"“6.23 mg/L) and high-range data (C0 = 5.41"“83.07 mg/L) were best fitted to the Langmuir model, with maximum uptake capacities of 12.01 and 187.5 mg/g (R2 = 0.995 and 0.996). In the Dubinin"“Radushkevich isotherm model, the mean biosorption energy was 12.91 kJ/mol, suggesting that ion exchange was the working mechanism. The biosorption apparently followed pseudo second-order kinetics (R2 = 0.994"“0.999; k2 = 2.04 E-03 to 3.86 E-02 g/mg min). The biosorption process was energetically feasible (∆G0 = −13.47"“−8.88 kJ/mol), exothermic (∆H0 = −74.82 kJ/mol) and tended to become more ordered (∆S0 = −0.204 kJ/mol K) towards the end of the process. The biosorbent was reusable through three adsorption/desorption cycles in 1 M HCl.

Copyrights © 2017






Journal Info

Abbrev

JETS

Publisher

Subject

Engineering

Description

Journal of Engineering and Technological Sciences welcomes full research articles in the area of Engineering Sciences from the following subject areas: Aerospace Engineering, Biotechnology, Chemical Engineering, Civil Engineering, Electrical Engineering, Engineering Physics, Environmental ...