<![CDATA[Extensive research has been conducted to address the issue of the reduced efficiency of solar photovoltaic (PV) cells at high temperatures. To address this problem, a hybrid cooling system has been developed. This system uses a thermal collector to convert waste heat into reusable heat. Selecting the best configuration and operational parameters for the collector is crucial for maximizing system performance. To achieve this, we conducted computational fluid dynamics (CFD) modeling using ANSYS. Various factors affecting the cooling of PV solar cells were analyzed, including the collector design, mass flow rate, and concentration of the Al2O3 nanofluids. Results showed that the 12S finned thermal collector system exhibits the lowest temperature for PV solar cells, at approximately 29.654 oC. The electrical efficiency of PV solar cells is influenced by the concentration of Al2O3 nanofluids. We found that the 12S finned collector system with 1% water/Al2O3 nanofluid achieved the highest efficiency (approximately 11.749%) at a flow rate of 0.09 kg/s. The addition of finned collectors affects efficiency and variations in fluid mass flow rates, and there is no relation between the connector type and different Al2O3nanofluid concentrations. In other words, the cooling system can be optimized to enhance the efficiency of the PV solar cells under high-temperature conditions. Doi: 10.28991/CEJ-2023-09-12-03 Full Text: PDF]]>
Copyrights © 2023
