MODIFIKASI KOEFISIEN RESPON SEISMIK (CS) UNTUK PERANCANGAN BANGUNAN SUPER TINGGI MENGGUNAKAN METODE PERFORMANCE-BASED DESIGN

Muharzaki Putri, Wirza
Djati Sidi, Indra
Boediono , Bambang
Kusumaningrum , Patria

Jurnal Teknik Sipil
Vol 31 No 1 (2024): Jurnal Teknik Sipil - Edisi April

Abstract Performance-Based Design (PBD) method is widely used to design or evaluate super high-rise building against earthquake loads. The building is expected to present a certain level of performance set on FEMA 303 in response to ground motions, and should meet the target performance at Service Level Earthquake (SLE) and at Risk-Targeted Maximum Considered Earthquake (MCER). The performance level would be determined by using non-linear time history analysis and it requires non-linier parameter based on reinforcement of the structural elements. The common method proposed by Tall Building Initiative (TBI) requires the structural members are designed using response spectra at Service Level Earthquake (SLE). The problem is the ground motion and response spectra at Service Level Earthquake (SLE) are not always immediately available. In this paper, the modified seismic response coefficient (CS-M) is introduced in designing the structural members, as an initial step of Performance-Based Design (PBD), using the common response spectra of Risk-Targeted Maximum Considered Earthquake (MCER) instead of Service Level Earthquake (SLE). The performance of buildings is evaluated at Service Level Earthquake (SLE) and Risk-Targeted Maximum Considered Earthquake (MCER) to validate that design with modified seismic response coefficient (CS-M) is still in accordance with method by Tall Building Initiative (TBI). Keywords: Modified Seismic Response Coefficient (CS-M), Performance-Based Design (PBD), Risk-Targeted Maximum Considered Earthquake (MCER), Service-Level Earthquake (SLE), Tall Building Initiative (TBI). Abstrak Metode Desain Berbasis Kinerja (PBD) banyak digunakan untuk merancang atau mengevaluasi bangunan super tinggi terhadap beban gempa bumi. Bangunan diharapkan dapat mencapai tingkat kinerja tertentu yang ditetapkan dalam FEMA 303 sebagai respons terhadap gerakan tanah, dan harus memenuhi kinerja target pada Service Level Earthquake (SLE) dan pada Risk-Targeted Maximum Considered Earthquake (MCER). Tingkat kinerja akan ditentukan dengan menggunakan analisis riwayat waktu non-linier dan membutuhkan parameter non-linier berdasarkan penulangan elemen struktural. Metode umum yang diusulkan oleh Tall Building Initiative (TBI) mengharuskan komponen struktural dirancang menggunakan respons spektra pada Service Level Earthquake (SLE). Masalahnya adalah gerakan tanah dan respons spektra pada Service Level Earthquake (SLE) tidak selalu tersedia secara langsung. Dalam paper ini, diperkenalkan koefisien respons seismik yang dimodifikasi (CS-M) dalam merancang komponen struktural, sebagai langkah awal Desain Berbasis Kinerja (PBD), dengan menggunakan respons spektra umum dari Risk-Targeted Maximum Considered Earthquake (MCER) sebagai ganti dari Service Level Earthquake (SLE). Kinerja bangunan dievaluasi pada kondisi Service Level Earthquake (SLE) dan Risk-Targeted Maximum Considered Earthquake (MCER) untuk memvalidasi bahwa desain dengan koefisien respons seismik yang dimodifikasi (CS-M) masih sesuai dengan metode yang diajukan oleh Tall Building Initiative (TBI). Kata kunci: Koefisien Respons Seismik yang Dimodifikasi (CS-M), Desain Berbasis Kinerja (PBD), Risk-Targeted Maximum Considered Earthquake (MCER), Service-Level Earthquake (SLE), Tall Building Initiative (TBI).