Borneo Engineering: Jurnal Teknik Sipil
Vol. 9 No. 3 (2025): Volume 9 Nomor 3 Tahun 2025

Analisis Stabilitas Lereng Menggunakan Matras dan Cerucuk Bambu pada Projek X

Musyaffa Esa Cahya (Politeknik Negeri Jakrta)
Intan Juliana (Politeknik Negeri Jakarta)
Yelvi Yelvi (Politeknik Negeri Jakarta)
Putera Agung Maha Agung (Politeknik Negeri Jakarta)
Aldo Wirastana Adinegara (Politeknik Negeri Jakarta)
Sony Pramusandi (Politeknik Negeri Jakarta)
Muhammad Fathur Rouf Hasan (Universitas Brawijaya)
Rahmat Faizal (Universitas Borneo Tarakan)



Article Info

Publish Date
22 Dec 2025

Abstract

The construction of PT. X' depot in Langsa City, Aceh, is located on soft clay soil that requires slope stability analysis for the embankment. This research aims to analyze slope stability using bamboo mattresses and piles as reinforcement to improve the safety factor. The analysis was conducted using manual calculations (Bishop method) and GeoStudio software (also using the Bishop method), under both static conditions and seismic influence (pseudostatic approach with a horizontal seismic coefficient (kh) = 0.18). The manual calculation results showed that the unreinforced slope had a safety factor (SF) of 1.1428 < 1.25 (unstable), which decreased to 0.6711 < 1.1 (unstable) under seismic load. Meanwhile, the GeoStudio software analysis indicated that the unreinforced slope had an SF of 1.256 > 1.25 (stable) but dropped to 0.903 < 1.1 (unstable) under seismic load. The use of 1–4 layers of bamboo piles and matting increased the SF to 1.318–1.35 without seismic influence. Under seismic conditions, the SF of the slope reinforced with 1–4 layers of bamboo piles and matting improved to 0.931–0.97. However, the slope was still considered critical during an earthquake (SF < 1.1).

Copyrights © 2025






Journal Info

Abbrev

bejts

Publisher

Subject

Civil Engineering, Building, Construction & Architecture

Description

Focus and Scope Borneo Engineering : Structural Engineering, Transportation Engineering, Water Resources, Geotechnical Engineering and Construction ...