Jurnal Teknik Sipil LATERAL
Vol 4 No 1 (2026): Jurnal Teknik Sipil LATERAL

ANALISIS KAPASITAS TANGKI SEPTIK KOMUNAL DESA SUNGAI BAUNG KECAMATAN TALANG UBI PALI

Agus Muslim (Mahasiswa Program Studi Program Profesi Insinyur, Fakultas Teknik, Universitas Sriwijaya, Palembang)
Kiagus Muhammad Aminuddin (Dosen Program Studi Program Profesi Insinyur, Fakultas Teknik, Universitas Sriwijaya)
David Bahrin (Dosen Program Studi Program Profesi Insinyur, Fakultas Teknik, Universitas Sriwijaya)
Deby Ansyory (Program Studi Teknik Sipil, Fakultas Teknik, Institut Teknologi dan Sains Nahdlatul Ulama Sriwijaya)



Article Info

Publish Date
15 Jul 2026

Abstract

The Community-Based Sanitation Program (SANIMAS) is a component of the Urban Sanitation and Rural Infrastructure (USRI) program that aims to create and improve the quality of life of the community, both individually and in groups, especially low-income communities in densely populated, slum and sanitation-prone urban areas. This study focuses on calculating the capacity and calculating the budget for the construction of a communal septic tank (RAB). The research location is in Sungai Baung Village, Talang Ubi District, PALI Regency. The design of the Communal Septic Tank (IPAL) building with an emptying time of 2 years. The population increase of 1.6% in 5 years resulted in a total of 355 communal septic tank users P (2020). From the calculation results, it was obtained that the IPAL built had a tank volume of 61 m3/day with a waste volume of 28.4 m3/day where the required sludge tank capacity was 28.5 m3 with a minimum capacity requirement in one day of 1,434 liters/person/day and a water capacity requirement of 5.1 m3.

Copyrights © 2026






Journal Info

Abbrev

lateral

Publisher

Subject

Civil Engineering, Building, Construction & Architecture Transportation

Description

Jurnal Teknik Sipil LATERAL Publishes Scientific Articles in the Field of Civil Engineering with scope: 1. Structure Engineering 2. Water Resources Engineering 3. Transportation 4. Geotechnics Engineering 5. Construction Engineering and Management 6. Construction and Building ...