Journal of Chemical Engineering Research Progress
2027: JCERP, Volume 4 Issue 1 Year 2027 (June) (Issue in Progress)

Development of Natural Plant-Based Additive for Wax Deposition Inhibition and Rheological Properties

Norida Ridzuan (Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Persiaran Tun Khalil Yaakob 26300 Kuantan, Pahang, Malaysia, Gambang, Pahang)
Haziq Zulhilmi Bin Faiz Muízzuddin (Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Persiaran Tun Khalil Yaakob 26300 Kuantan, Pahang, Malaysia, Gambang, Pahang)
Muhammad Firdaus Wahab (Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Persiaran Tun Khalil Yaakob 26300 Kuantan, Pahang, Malaysia, Gambang, Pahang)
Muhammad Yazid Farhan (Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Persiaran Tun Khalil Yaakob 26300 Kuantan, Pahang, Malaysia, Gambang, Pahang)
Siti Qurratu Aini Mahat (Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Persiaran Tun Khalil Yaakob 26300 Kuantan, Pahang, Malaysia, Gambang, Pahang)
Norasyikin Ismail (Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Persiaran Tun Khalil Yaakob 26300 Kuantan, Pahang, Malaysia, Gambang, Pahang)
Francis Nyah (Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Persiaran Tun Khalil Yaakob 26300 Kuantan, Pahang, Malaysia, Gambang, Pahang)



Article Info

Publish Date
30 Jun 2027

Abstract

Wax deposition is a major flow-assurance challenge in oil and gas pipelines, particularly under low-temperature conditions that promote wax crystallization and accumulation. This study developed and evaluated a plant-based cellulose-acetate additive as an environmentally friendly alternative to conventional synthetic wax inhibitors. Cellulose acetate was extracted, formulated, and characterized using FTIR, GC-MS, and GC-FID, while wax-inhibition performance was assessed using a cold-finger wax deposition test and rheological analysis with a rheometer. FTIR confirmed the presence of characteristic functional groups, while Sample A produced at 200 rpm exhibited the most favourable characteristics, with GC-MS abundance profiles and GC-FID retention times closely comparable to those of a commercial inhibitor. The optimum wax-deposition conditions were 100 rpm, 13 °C, and 4 h using 20 mL of 8000 ppm inhibitor, resulting in a minimum wax deposit of 0.16 g. Rheological analysis identified 8000 ppm as the optimum concentration, producing the lowest viscosity of 4.0104 cP at 25 °C. Although this concentration showed a slightly higher interfacial tension (IFT), the increase had minimal influence on inhibition performance. Rice-husk-derived cellulose acetate demonstrated promising potential for reducing wax deposition while maintaining favourable crude-oil flow properties. The study contributes to green chemistry and agricultural-waste valorisation, while further investigation of long-term stability and field-scale performance is recommended. Copyright © 2027 by Authors, Published by Universitas Diponegoro and BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Copyrights © 2027






Journal Info

Abbrev

jcerp

Publisher

Subject

Chemical Engineering, Chemistry & Bioengineering Energy Engineering Materials Science & Nanotechnology

Description

The Journal of Chemical Engineering Research Progress (e-ISSN: 3032-7059; Short Abbreviation Title: J. Chem. Eng. Res. Prog.) is an international research journal and invites contributions of original and novel fundamental research. The JCERP journal aims to provide an international forum for the ...