Norida Ridzuan
Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Persiaran Tun Khalil Yaakob 26300 Kuantan, Pahang, Malaysia, Gambang, Pahang

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Acacia auriculiformis-Derived Cellulose Nanoparticles as a Sustainable Nanofluid for Enhanced Oil Recovery Francis Nyah; Abutu David; Kufre Mkpadem; Money Barima; Okorie Agwu; Norida Ridzuan
Journal of Chemical Engineering Research Progress 2026: JCERP, Volume 3 Issue 2 Year 2026 (December)
Publisher : UPT Laboratorium Terpadu, Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/jcerp.20816

Abstract

Conventional enhanced oil recovery (EOR) methods often lose effectiveness under high-temperature, high-salinity (HTHS) conditions because of inadequate fluid stability, limited wettability alteration, and insufficient interfacial tension (IFT) reduction. This study developed and evaluated cellulose nanoparticles (CNPs) derived from Acacia auriculiformis as a sustainable nanofluid for EOR. CNPs were extracted using a deep eutectic solvent (DES) process and surface-modified to improve thermal stability and interfacial functionality. Structural, morphological, compositional, and thermal characteristics were evaluated, while the resulting cellulose nanofluid (CNF) was assessed through rheology, IFT, contact-angle, and sand-pack flooding experiments. The process yielded 78.3% CNP, with an average particle size of 19.65 ± 0.2 nm and crystallinity index (CrI) of 76.6%, confirming successful formation of crystalline nanocellulose. At 0.2 wt%, CNF reduced oil-water IFT to approximately 7.8 mN/m at elevated temperature and decreased the sandstone contact angle to 16.5°, indicating strong water-wet alteration. Sand-pack flooding achieved 13.7% incremental oil recovery and 72.3% total recovery, compared with 9.8% incremental recovery and 63.1% total recovery for xanthan. The superior performance is attributed to the combined effects of IFT reduction, wettability alteration, mobility control, and thermal stability. Overall, Acacia-derived CNF demonstrates greater EOR potential than xanthan and represents a promising, environmentally sustainable nanofluid for challenging reservoir conditions. Copyright © 2026 by Authors, Published by Universitas Diponegoro and BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Development of Natural Plant-Based Additive for Wax Deposition Inhibition and Rheological Properties Norida Ridzuan; Haziq Zulhilmi Bin Faiz Muízzuddin; Muhammad Firdaus Wahab; Muhammad Yazid Farhan; Siti Qurratu Aini Mahat; Norasyikin Ismail; Francis Nyah
Journal of Chemical Engineering Research Progress 2027: JCERP, Volume 4 Issue 1 Year 2027 (June) (Issue in Progress)
Publisher : UPT Laboratorium Terpadu, Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/jcerp.20840

Abstract

Wax deposition is a major flow-assurance challenge in oil and gas pipelines, particularly under low-temperature conditions that promote wax crystallization and accumulation. This study developed and evaluated a plant-based cellulose-acetate additive as an environmentally friendly alternative to conventional synthetic wax inhibitors. Cellulose acetate was extracted, formulated, and characterized using FTIR, GC-MS, and GC-FID, while wax-inhibition performance was assessed using a cold-finger wax deposition test and rheological analysis with a rheometer. FTIR confirmed the presence of characteristic functional groups, while Sample A produced at 200 rpm exhibited the most favourable characteristics, with GC-MS abundance profiles and GC-FID retention times closely comparable to those of a commercial inhibitor. The optimum wax-deposition conditions were 100 rpm, 13 °C, and 4 h using 20 mL of 8000 ppm inhibitor, resulting in a minimum wax deposit of 0.16 g. Rheological analysis identified 8000 ppm as the optimum concentration, producing the lowest viscosity of 4.0104 cP at 25 °C. Although this concentration showed a slightly higher interfacial tension (IFT), the increase had minimal influence on inhibition performance. Rice-husk-derived cellulose acetate demonstrated promising potential for reducing wax deposition while maintaining favourable crude-oil flow properties. The study contributes to green chemistry and agricultural-waste valorisation, while further investigation of long-term stability and field-scale performance is recommended. Copyright © 2027 by Authors, Published by Universitas Diponegoro and BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).