This study aims to determine the effects of factors and levels, specifically, exposure times of 30 and 60 minutes; low and high spinning speeds; and washing times of 5 and 10 minutes on surface hardness using a 2k full factorial design. Statistical analysis revealed that the Washing Time factor had a statistically significant effect on surface hardness with a P-value of 0.036 (alpha = 0.05). Increasing the washing time from 5 to 10 minutes increased the mean surface hardness from 85.31 to 86.19 Shore D, or approximately 1.04%, indicating a statistically significant but modest practical effect within the tested experimental range. Meanwhile, the factors Exposure Time and Spinning Speed, as well as all interactions between the factors, did not have a statistically significant effect on surface hardness. The relatively low R-squared of 36.63% and predicted R-squared of 0.00% indicate that the model has limited explanatory and predictive capability. Residual analysis showed that the assumptions of normality and independence of the residuals were met. Overall, washing time showed a statistically significant but modest effect on surface hardness. Given the limited explanatory and predictive capability of the model, these findings should be interpreted only within the tested experimental range.
Copyrights © 2026