Civil Engineering Journal
Vol. 12 No. 9 (2026): September

Reliability-Based Assessment of Ballast Bearing Capacity Under Aggregate Degradation in Railway Tracks

Mohammed Ashiru (Department of Civil Engineering, Ahmadu Bello University, Zaria 810107)
Zhihong Nie (School of Civil Engineering, Central South University, Changsha 410075)
Aliyu Ibrahim (Department of Civil Engineering, Ahmadu Bello University, Zaria 810107)
Zesizwe Ngubane (Sustainable Environment and Transportation Research Group (SET-RG), Department of Civil Engineering Midlands, Durban University of Technology, Private Bag X01, Scottsville, Pietermaritzburg 3021)
Jacob Adedayo Adedeji (Sustainable Environment and Transportation Research Group (SET-RG), Department of Civil Engineering Midlands, Durban University of Technology, Private Bag X01, Scottsville, Pietermaritzburg 3021)
Nura Shehu Aliyu Yaro (Sustainable Environment and Transportation Research Group (SET-RG), Department of Civil Engineering Midlands, Durban University of Technology, Private Bag X01, Scottsville, Pietermaritzburg 3021)



Article Info

Publish Date
01 Sep 2026

Abstract

The long-term performance and safety of ballasted railway tracks are significantly influenced by ballast degradation, which occurs under repeated train axle loads and results in diminished particle angularity, eroded surface texture, increased fines content, and reduced bearing capacity. This study assesses the effects of ballast degradation on bearing capacity using a reliability-based design framework that explicitly accounts for material and loading uncertainties. Experimental investigations comprised Los Angeles abrasion tests to quantify particle degradation using Marsal's breakage ratio and large-scale direct shear tests conducted under simulated axle loads of 20, 25, and 30 tonnes (equivalent contact stresses of 192, 240, and 288 kPa) to determine changes in shear strength parameters. Stochastic models of key design variables were developed from experimental data, and a limit equilibrium performance function was formulated, defining resistance as ballast-bearing capacity and load as the stress at the ballast–sleeper interface. Reliability analysis was conducted using the first-order reliability method (FORM) to estimate reliability indices and failure probabilities. The results show that increasing ballast degradation and axle loads significantly reduce shear strength and reliability and increase failure probability, particularly under 25- and 30-tonne loads. The study integrates laboratory-derived degradation indices with probabilistic reliability analysis, providing a practical approach for incorporating uncertainty into ballast design, maintenance planning, and railway safety management while extending track service life.

Copyrights © 2026






Journal Info

Abbrev

cej

Publisher

Subject

Civil Engineering, Building, Construction & Architecture

Description

Civil Engineering Journal is a multidisciplinary, an open-access, internationally double-blind peer -reviewed journal concerned with all aspects of civil engineering, which include but are not necessarily restricted to: Building Materials and Structures, Coastal and Harbor Engineering, ...