The main objective of this study is to use life cycle assessment (LCA) to investigate the environmental impact of each process in a water treatment plant in Iraq. The inventory data for the LCA were obtained from the operational phase to avoid the excessive redundancy observed in studies covering all life cycle phases. The research method involved on-site data collection and field measurements of energy and chemical use, sludge generation, and the transportation of materials and waste. SimaPro 3.9 software was then utilized as an analysis tool for these inputs to clarify the mid-point effects of each process. The findings revealed that global warming potential (GWP) is the major environmental impact category across all treatment stages, particularly for water facilities associated with water movement, such as inlet and outlet pumps, which consume nearly 75% of the total energy consumption. The disinfection process showed the highest contribution to the impact from chemicals, with the ozone depletion potential (ODP) quantified at 0.305 kg R11-Eq. The key finding of this study highlights the role of real-time power consumption in each operation in determining the actual values of the environmental impact categories compared with data collected according to design assumptions. This approach will help establish a database of environmental impacts if applied to WTPs within the same geographic area.
Copyrights © 2026