The movement of a CNC airbrush machine can be programmed with high precision however, the dimensional accuracy of the resulting pattern is still influenced by several factors. This study examined the effects of nozzle diameter, air pressure, and nozzle distance on fabric painting results and identified the parameter combination with the lowest dimensional error. A full factorial experiment with three factors at three levels was used. The tested nozzle diameters were 0.2, 0.3, and 0.5 mm; air pressures were 20, 25, and 30 psi; and nozzle distances were 0.5, 1.0, and 1.5 cm. Each combination was repeated three times, producing 81 observations. A 30 mm × 30 mm square was painted on prima cotton fabric. Pattern length, width, and line width were measured from calibrated images using ImageJ and analysed using three-way factorial analysis of variance. Mean pattern length and width weres 30.686 mm and 30.519 mm, while mean line width and dimensional error were 2.201 mm and 0.767 mm. All three factors had significant effects. Nozzle distance had the strongest effect on line width, whereas nozzle diameter was the dominant factor for dimensional error. The combination of a 0.2 mm nozzle, 25 psi pressure, and 0.5 cm distance produced the lowest error of 0.073 mm, equivalent to 99.76% accuracy. These results provide an initial operating reference for precise contours and small fabric patterns. Keywords: air pressure; CNC airbrush; factorial ANOVA; nozzle diameter; nozzle distance
Copyrights © 2027