Civil Engineering Journal
Vol. 12 No. 10 (2026): October

Incremental Dynamic Analysis of Seismic Fragility in RC Columns with Varying Reinforcement Ratios

Joe Robert Paul G. Lucena (1) School of Engineering, Asia Pacific College, Makati City 1232, Philippines. 2) Naveen Jindal Young Global Research Fellowship, O.P. Jindal Global University, Haryana 131001)
Franklyn F. Manggapis (Civil Engineering Department, Far Eastern University Alabang, Muntinlupa City 1781)
Luigi Carlo M. De Jesus (1) School of Engineering, Asia Pacific College, Makati City 1232, Philippines. 2) Naveen Jindal Young Global Research Fellowship, O.P. Jindal Global University, Haryana 131001)
Alibek Adilbekov (2) Naveen Jindal Young Global Research Fellowship, O.P. Jindal Global University, Haryana 131001, India.4) M. Kozybayev North Kazakhstan University, Petropavlovsk 150000)
Shakhnoza Makhmudova (2) Naveen Jindal Young Global Research Fellowship, O.P. Jindal Global University, Haryana 131001, India. 5) Tashkent State Transport University, Tashkent 100123)
Kamola Mannapova (2) Naveen Jindal Young Global Research Fellowship, O.P. Jindal Global University, Haryana 131001, India. 5) Tashkent State Transport University, Tashkent 100123)



Article Info

Publish Date
01 Oct 2026

Abstract

This study evaluates the influence of longitudinal reinforcement ratios on the model-predicted seismic fragility of reinforced-concrete (RC) cantilever columns. By holding geometry, materials, loading, and modeling formulation constant, four 300 × 300 mm, 4.0 m-high numerical columns with varying reinforcement ratios (6.55%, 4.19%, 2.79%, and 2.18%) were analyzed in SeismoStruct to isolate the comparative influence of steel content on drift-based fragility. Seven horizontal records from the 1989 Mw 6.9 Loma Prieta earthquake were incrementally scaled using peak ground acceleration (PGA) as the intensity measure. Maximum drift ratio served as the engineering demand parameter, with lognormal fragility functions fitted for 0.5%, 0.7%, 1.5%, 2.5%, and 5.0% drift thresholds. Results demonstrate that the mean PGA required to reach a 5.0% drift decreased from 1.85g for the most heavily reinforced column to 1.42g, 1.07g, and 0.95g as reinforcement decreased. While performance differences between the columns were small or non-monotonic at lower thresholds, they became clear at severe drift levels, accompanied by increased record-to-record dispersion for the least reinforced model. Ultimately, this controlled comparison highlights that reinforcement effects depend significantly on the selected drift severity and fitted dispersion, providing simulation-based, relative threshold-exceedance trends rather than evidence of experimentally validated physical collapse.

Copyrights © 2026






Journal Info

Abbrev

cej

Publisher

Subject

Civil Engineering, Building, Construction & Architecture

Description

Civil Engineering Journal is a multidisciplinary, an open-access, internationally double-blind peer -reviewed journal concerned with all aspects of civil engineering, which include but are not necessarily restricted to: Building Materials and Structures, Coastal and Harbor Engineering, ...