G-Tech : Jurnal Teknologi Terapan
Vol 10 No 4 (2026): G-Tech, Vol. 10 No. 4 October 2026

Effect of Nitric Acid Concentration in Synthesizing Liquid Calcium Nitrate Fertilizer from Acetylene Carbide Slag

Muflikhatus Safa'ah Annawawi (University of Pembangunan Nasional Veteran Jawa Timur)
Miranda Dwi Syafitri (University of Pembangunan Nasional Veteran Jawa Timur)
Ketut Sumada (University of Pembangunan Nasional Veteran Jawa Timur)
Lilik Suprianti (University of Pembangunan Nasional Veteran Jawa Timur)



Article Info

Publish Date
20 Oct 2026

Abstract

This study aims to investigate the synthesis of liquid calcium nitrate fertilizer from acetylene industry solid waste (carbide slag, ) and analyze the effect of nitric acid ( ) concentration on nutrient composition and quality parameters. Carbide slag characterization via SEM-EDX revealed a high calcium (Ca) content of 44.64%, proving its high viability as a raw material precursor. The experimental process involved reacting 30 g of 80-mesh  powder with 150 mL of  across varied concentrations (10%, 14%, 18%, 22%, and 26%) and reaction temperatures (30°C to 70°C) for 30 minutes at 350 rpm stirring speed. The nutrient contents were quantitatively analyzed using UV-Vis spectrophotometry for calcium and the Kjeldahl method for nitrogen. The results demonstrated that an 18%  concentration combined with the evaluated temperature range significantly affected the dissolution process, yielding calcium and nitrogen contents of 21.1710% and 11.31%, respectively, with an ideal pH of 6. Higher  concentrations (22% and 26%) caused a slight decline in calcium content and increased acidity (pH 4) due to partial acid volatilization and liquid dilution. Thus, an 18%  concentration represents the optimal condition for converting carbide slag into high-value liquid fertilizer within the tested parameters.This study aims to investigate the synthesis of liquid calcium nitrate fertilizer from acetylene industry solid waste (carbide slag, ) and analyze the effect of nitric acid ( ) concentration on nutrient composition and quality parameters. Carbide slag characterization via SEM-EDX revealed a high calcium (Ca) content of 44.64%, proving its high viability as a raw material precursor. The experimental process involved reacting 30 g of 80-mesh  powder with 150 mL of  across varied concentrations (10%, 14%, 18%, 22%, and 26%) and reaction temperatures (30°C to 70°C) for 30 minutes at 350 rpm stirring speed. The nutrient contents were quantitatively analyzed using UV-Vis spectrophotometry for calcium and the Kjeldahl method for nitrogen. The results demonstrated that an 18%  concentration combined with the evaluated temperature range significantly affected the dissolution process, yielding calcium and nitrogen contents of 21.1710% and 11.31%, respectively, with an ideal pH of 6. Higher  concentrations (22% and 26%) caused a slight decline in calcium content and increased acidity (pH 4) due to partial acid volatilization and liquid dilution. Thus, an 18%  concentration represents the optimal condition for converting carbide slag into high-value liquid fertilizer within the tested parameters.

Copyrights © 2026






Journal Info

Abbrev

g-tech

Publisher

Subject

Computer Science & IT Decision Sciences, Operations Research & Management Energy Engineering

Description

Jurnal G-Tech bertujuan untuk mempublikasikan hasil penelitian asli dan review hasil penelitian tentang teknologi dan terapan pada ruang lingkup keteknikan meliputi teknik mesin, teknik elektro, teknik informatika, sistem informasi, agroteknologi, ...