Ketut Sumada
University of Pembangunan Nasional Veteran Jawa Timur

Published : 1 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 1 Documents
Search

Effect of Nitric Acid Concentration in Synthesizing Liquid Calcium Nitrate Fertilizer from Acetylene Carbide Slag Muflikhatus Safa'ah Annawawi; Miranda Dwi Syafitri; Ketut Sumada; Lilik Suprianti
G-Tech: Jurnal Teknologi Terapan Vol 10 No 4 (2026): G-Tech, Vol. 10 No. 4 October 2026
Publisher : Universitas Islam Raden Rahmat, Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.70609/gtech.v10i4.11420

Abstract

This study aims to investigate the synthesis of liquid calcium nitrate fertilizer from acetylene industry solid waste (carbide slag, ) and analyze the effect of nitric acid ( ) concentration on nutrient composition and quality parameters. Carbide slag characterization via SEM-EDX revealed a high calcium (Ca) content of 44.64%, proving its high viability as a raw material precursor. The experimental process involved reacting 30 g of 80-mesh  powder with 150 mL of  across varied concentrations (10%, 14%, 18%, 22%, and 26%) and reaction temperatures (30°C to 70°C) for 30 minutes at 350 rpm stirring speed. The nutrient contents were quantitatively analyzed using UV-Vis spectrophotometry for calcium and the Kjeldahl method for nitrogen. The results demonstrated that an 18%  concentration combined with the evaluated temperature range significantly affected the dissolution process, yielding calcium and nitrogen contents of 21.1710% and 11.31%, respectively, with an ideal pH of 6. Higher  concentrations (22% and 26%) caused a slight decline in calcium content and increased acidity (pH 4) due to partial acid volatilization and liquid dilution. Thus, an 18%  concentration represents the optimal condition for converting carbide slag into high-value liquid fertilizer within the tested parameters.This study aims to investigate the synthesis of liquid calcium nitrate fertilizer from acetylene industry solid waste (carbide slag, ) and analyze the effect of nitric acid ( ) concentration on nutrient composition and quality parameters. Carbide slag characterization via SEM-EDX revealed a high calcium (Ca) content of 44.64%, proving its high viability as a raw material precursor. The experimental process involved reacting 30 g of 80-mesh  powder with 150 mL of  across varied concentrations (10%, 14%, 18%, 22%, and 26%) and reaction temperatures (30°C to 70°C) for 30 minutes at 350 rpm stirring speed. The nutrient contents were quantitatively analyzed using UV-Vis spectrophotometry for calcium and the Kjeldahl method for nitrogen. The results demonstrated that an 18%  concentration combined with the evaluated temperature range significantly affected the dissolution process, yielding calcium and nitrogen contents of 21.1710% and 11.31%, respectively, with an ideal pH of 6. Higher  concentrations (22% and 26%) caused a slight decline in calcium content and increased acidity (pH 4) due to partial acid volatilization and liquid dilution. Thus, an 18%  concentration represents the optimal condition for converting carbide slag into high-value liquid fertilizer within the tested parameters.