Despite extensive research on plastic and oil pyrolysis, many studies have evaluated liquid yield, energy efficiency, and fuel quality separately, thereby limiting the integrated assessment of the process. This study investigates the catalytic co-pyrolysis of Polyethylene Terephthalate (PET) waste and used cooking oil over natural zeolite, with simultaneous evaluation of liquid yield, electrical energy efficiency, and fuel properties. Experiments were conducted at 500 °C for 90 min in a batch reactor equipped with a water-cooled condenser. PET-to-oil ratios of 1:2, 2:1, 1:1, 3:1, 1:3, and 1:0 were tested at a fixed catalyst loading of 5 wt%. Among the tested compositions, the 1:1 ratio produced the highest reported liquid yield (21.99%) and liquid-energy-to-electrical-input metric (35.06%). The corresponding liquid product had a calorific value of 44.13 MJ/kg, a density of 0.8177 g/cm³, and a kinematic viscosity of 1.2711 mm²/s. The reported density and viscosity values were compared numerically with the Indonesian B35 (CN 48) reference ranges. These results identify a favorable laboratory-scale operating condition for PET–used-cooking-oil co-processing. However, because the experiments were single-point measurements, no catalyst-free control was included, total feedstock loading was not identical across archived runs, and complete gas/char balances were unavailable, the results should be interpreted as an operating-window demonstration rather than a definitive quantification of feedstock-ratio effects, catalytic synergy, or scale-up feasibility.
Copyrights © 2026