Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol. 4 No. 5 (2026): Oktober: Venus: Jurnal Publikasi Rumpun Ilmu Teknik

Analisa Kualitas Rekondisi Pipa Collapse Astm A106 Grade B Dengan Proses Heat Treatment Normalizing Dan Quenching Pada Uji Tarik

Ridha Siddiq (Universitas Batam)
Abdul Hamid (Universitas Batam)
Ilham Maulana (Universitas Batam)



Article Info

Publish Date
23 Oct 2026

Abstract

ASTM A106 Grade B pipes that have collapsed under external pressure must be reconditioned before their fitness for further use can be reassessed. This study analyzes how normalizing and quenching heat treatments affect the mechanical properties of collapsed pipes, using tensile testing. The deformed pipes were first reconditioned and then heated to 850°C with a holding time of 1 hour. After heating, the normalized specimens were cooled slowly in open air, while the quenched specimens were cooled rapidly in water. Nine specimens were tested and divided into three groups: non-heat-treated specimens as the control, normalized specimens, and quenched specimens. The tensile test measured yield stress, ultimate tensile stress (UTS), and elongation. The non-heat-treated specimens had a yield stress of 387 MPa, a UTS of 483 MPa, and an elongation of 20%. Normalizing lowered the yield stress to 275 MPa and the UTS to 452 MPa, but raised the elongation considerably, to 37%. Quenching produced the highest strength of the three groups, with a yield stress of 545 MPa and a UTS of 889 MPa. This gain in strength came with a drop in elongation to 13%, which is lower than that of the untreated specimens. The comparison shows a trade-off between strength and ductility in the two heat treatment methods. Normalizing proved to be the most effective and safest reconditioning method, because it restored the ductility of the material to meet the minimum ASTM A106 Grade B requirement of 23% elongation. The elongation values of the non-heat-treated specimens (20%) and the quenched specimens (13%) remained below this limit.

Copyrights © 2026






Journal Info

Abbrev

Venus

Publisher

Subject

Automotive Engineering Chemical Engineering, Chemistry & Bioengineering Civil Engineering, Building, Construction & Architecture Computer Science & IT Engineering

Description

Engineering Science Clump. include the sub-groups of Civil Engineering and Spatial Planning, Industrial Engineering, Electrical and Computer Engineering. The Research Journal of the Engineering Science ...